InstallationLCD Projectors
PT-MZ880 SeriesPT-MZ880 / PT-MZ780 / PT-MZ680
 PT-MZ880 |
 PT-MZ780 |
|
|---|---|---|
| Projector type | LCD projectors | |
| LCD panel | ||
| Panel size | 19.3 mm (0.76˝) diagonal (16:10 aspect ratio) | |
| Display method | Transparent LCD panel (x 3, R/G/B) | |
| Drive method | Active matrix | |
| Pixels | 2,304,000 (1920 x 1200) pixels x 3 | |
| Light source | Laser diodes | |
| Light output*1
?
ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m2). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. |
8,000 lm*2 / 8,000 lm (ANSI)*3 | 7,000 lm*2 / 7,000 lm (ANSI)*3 |
| Time until light output declines to 50 %*4 | 20,000 hours (NORMAL/QUIET)/24,000 hours (ECO) | |
| Resolution | WUXGA (1920 x 1200 pixels) | |
| Contrast ratio*2 | 3,000,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1] or [2]. HDMI signal input) |
|
| Screen size (diagonal) | 1.02–10.16 m (40–400 in), 1.52–10.16 m (60–400 in) with the ET-ELW22, 2.54–10.16 m (100–400 in) with the ET-ELU20, 16:10 aspect ratio | |
| Center-to-corner zone ratio*2 |
85 % | |
| Lens | Powered zoom (throw ratio 1.61–2.76:1), powered focus F = 1.7–2.3, f = 26.8–45.5 mm (for supplied lens; optional lenses also available) |
|
| Lens shift | ||
| Vertical (From the origin point of the lens mounter) |
±67 % (powered) (for supplied lens; optional lenses also available*5) | |
| Horizontal (From the origin point of the lens mounter) |
±35 % (powered) (for supplied lens; optional lenses also available*5) | |
| Keystone correction range | Vertical: ±25 °, Horizontal: ±30 ° (for supplied lens; optional lenses also available*5) | |
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| HDMI IN | HDMI 19-pin x 3 (Compatible with HDCP 2.3, Deep Color, 4K/60p*6 signal input), CEC supported | |
| COMPUTER IN | D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) | |
| MONITOR OUT | D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) | |
| SERIAL/MULTI SYNC IN | D-sub 9-pin (female) x 1 for external control/link control (RS-232C compliant) | |
| MULTI SYNC OUT | D-sub 9-pin (male) x 1 for link control | |
| REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control | |
| REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |
| AUDIO IN | M3 stereo mini-jack x 1 | |
| AUDIO OUT | M3 stereo mini-jack x 1 | |
| DIGITAL LINK/LAN | RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p*6, *7 signal input) | |
| LAN | RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) | |
| DC OUT | USB Connector (Type A) x 1 (Output 5 V/2 A) | |
| Power supply | AC 100–240 V, 50/60 Hz | |
| Power consumption*8 | ||
| Maximum power consumption | 490 W (5.4–2.6 A) (510VA) (Power consumption is 465 W at 200–240 V) |
435 W (4.8–2.3 A) (460VA) (Power consumption is 415 W at 200–240 V) |
| On-mode power consumption (Light power) |
[NORMAL]: 435 W (100–120 V), 415 W (200–240 V), [ECO]: 315 W (100–120 V), 300 W (200–240 V), [QUIET]: 310 W (100–120 V), 295 W (200–240 V) | [NORMAL]: 395 W (100–120 V), 375 W (200–240 V), [ECO]: 285 W (100–120 V), 275 W (200–240 V), [QUIET]: 280 W (100–120 V), 270 W (200–240 V) |
| Cabinet materials | Molded plastic | |
| Filter | Included (Estimated maintenance time: approx. 20,000 hours) | |
| Operation noise*2 | 34 dB (NORMAL/ECO), 27 dB (QUIET) |
32 dB (NORMAL/ECO), 26 dB (QUIET) |
| Dimensions (W x H*9 x D) |
561 x 224 x 439 mm (22 3/32" x 8 13/16" x 17 9/32") (with supplied lens) | |
| Weight*10 | Approx. 18.6 kg (41.0 lbs) (with supplied lens) | |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)*11, operating humidity: 20–80 % (no condensation) |
|
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android™, Geometry Manager Pro*12 | |
 PT-MZ680 |
||
|---|---|---|
| Projector type | LCD projectors | |
| LCD panel | ||
| Panel size | 19.3 mm (0.76˝) diagonal (16:10 aspect ratio) | |
| Display method | Transparent LCD panel (x 3, R/G/B) | |
| Drive method | Active matrix | |
| Pixels | 2,304,000 (1920 x 1200) pixels x 3 | |
| Light source | Laser diodes | |
| Light output*1
?
ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m2). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. |
6,000 lm*2 / 6,000 lm (ANSI)*3 | |
| Time until light output declines to 50 %*4 | 20,000 hours (NORMAL/QUIET)/24,000 hours (ECO) | |
| Resolution | WUXGA (1920 x 1200 pixels) | |
| Contrast ratio*2 | 3,000,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1] or [2]. HDMI signal input) |
|
| Screen size (diagonal) | 1.02–10.16 m (40–400 in), 1.52–10.16 m (60–400 in) with the ET-ELW22, 2.54–10.16 m (100–400 in) with the ET-ELU20, 16:10 aspect ratio | |
| Center-to-corner zone ratio*2 |
85 % | |
| Lens | Powered zoom (throw ratio 1.61–2.76:1), powered focus F = 1.7–2.3, f = 26.8–45.5 mm (for supplied lens; optional lenses also available) |
|
| Lens shift | ||
| Vertical (From the origin point of the lens mounter) |
±67 % (powered) (for supplied lens; optional lenses also available*5) | |
| Horizontal (From the origin point of the lens mounter) |
±35 % (powered) (for supplied lens; optional lenses also available*5) | |
| Keystone correction range | Vertical: ±25 °, Horizontal: ±30 ° (for supplied lens; optional lenses also available*5) | |
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| HDMI IN | HDMI 19-pin x 3 (Compatible with HDCP 2.3, Deep Color, 4K/60p*6 signal input), CEC supported | |
| COMPUTER IN | D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) | |
| MONITOR OUT | D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) | |
| SERIAL/MULTI SYNC IN | D-sub 9-pin (female) x 1 for external control/link control (RS-232C compliant) | |
| MULTI SYNC OUT | D-sub 9-pin (male) x 1 for link control | |
| REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control | |
| REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |
| AUDIO IN | M3 stereo mini-jack x 1 | |
| AUDIO OUT | M3 stereo mini-jack x 1 | |
| DIGITAL LINK/LAN | RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p*6, *7 signal input) | |
| LAN | RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) | |
| DC OUT | USB Connector (Type A) x 1 (Output 5 V/2 A) | |
| Power supply | AC 100–240 V, 50/60 Hz | |
| Power consumption*8 | ||
| Maximum power consumption | 360 W (4.2–2.0 A) (395VA) (Power consumption is 345 W at 200–240 V) |
|
| On-mode power consumption (Light power) |
[NORMAL]: 330 W (100–120 V), 315 W (200–240 V), [ECO]: 240 W (100–120 V), 230 W (200–240 V), [QUIET]: 238 W (100–120 V), 228 W (200–240 V) | |
| Cabinet materials | Molded plastic | |
| Filter | Included (Estimated maintenance time: approx. 20,000 hours) | |
| Operation noise*2 | 32 dB (NORMAL/ECO), 26 dB (QUIET) | |
| Dimensions (W x H*9 x D) |
561 x 224 x 439 mm (22 3/32" x 8 13/16" x 17 9/32") (with supplied lens) | |
| Weight*10 | Approx. 17.6 kg (38.8 lbs) (with supplied lens) | |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)*11, operating humidity: 20–80 % (no condensation) |
|
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android™, Geometry Manager Pro*12 | |
*1 When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL].
*2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
*3 Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped.
*4 Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2]). Estimated time until light output declines to 50 % varies depending on environment.
*5 Lens-shift range and keystone correction range may vary depending on lens.
*6 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection.
*7 YPBPR 4:2:0 format only for 4K/60p signals input via DIGITAL LINK.
*8 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft).
*9 With legs at shortest position.
*10 Average value. May differ depending on the actual unit.
*11 Note that the projector cannot be used at altitudes 2,700 m (8,858 ft) or higher above sea level. In the following operating environments, light output may be reduced to protect the projector: when the projector is used at altitudes below 700 m (2,297 ft) and ambient temperature is 36 °C (97 °F) or higher; when the projector is used at altitudes between 700 m (2,297 ft) and 1,400 m (4,593 ft) exclusive and ambient temperature is 34 °C (93 °F) or higher; when the projector is used at altitudes between 1,400 m (4,593 ft) and 2,100 m (6,890 ft) exclusive and ambient temperature is 32 °C (90 °F) or higher; and when the projector is used at altitudes between 2,100 m (6,890 ft) and 2,700 m (8,858 ft) exclusive and ambient temperature is 30 °C (86 °F) or higher.
*12 Some functions available in Geo Pro software are not supported by the PT-MZ880 Series.
