Global Home You are here:Support > containsMulti-Function Printer / Consumer FAX > containsDownload for PC interface software


Main Contents begins from here.

Support

Multi-Function Printer / Consumer FAX

Download for PC interface software

KX-FLM600G printer driver for Windows(R)2000/XP

Works with Windows(R)2000/XP
Support Language German
PC interface Parallel
Update 29/Aug/2002

PC minimum requirements:
CPU Windows 2000 : Pentium(R) 166MHz or higher
Windows XP    : Pentium(R) 300MHz or higher
Memory Minimum Windows 2000 : 64MB
Windows XP    : 128MB
Hard Disk More than 5MB available space
Other IEEE1284 parallel port and cable


Note: This software download is only a printer driver. PANALINK software is not included. PANALINK software is only compatible with the following Operating Systems: Windows 3.1/95/98/Me

1. Download the file below to the specified folder on your PC's hard disk, for example C:\TEMP.
File Name Part File Size
E42GB010.EXE 1/1 1,179KB
2. Run executable file to extract specified folder named "FLM600_650"
3. Close all applications.
4. Run "Setup.exe".
5. Follow the instructions on the screen until all files have been installed.
Note: You must be logged in as an Administrator.

KX-FLM600G PANALINK software for
Windows(R)95/98/Me


Works with Windows(R)95/98/Me
Support Language German
PC interface Parallel
Update 24/Feb/2000

PC minimum requirements:
CPU An IBM compatible personal computer with a 486 or higher processor
(Pentium is recommended)
Memory Minimum 16MB (32MB or more is recommended)
Hard Disk More than 40MB available space
Other IEEE1284 parallel port and cable

If you download the files below, you don't need floppy disks.
Instructions for downloading for Windows

1. Download all files to the specified folder on your PC's hard disk (for example C:/TEMP).
File Name Part File Size
E42GA011.EXE 1/8 1,205KB
E42GA012.EXE 2/8 1,434KB
E42GA013.EXE 3/8 1,436KB
E42GA014.EXE 4/8 1,437KB
E42GA015.EXE 5/8 1,435KB
E42GA016.EXE 6/8 1,433KB
E42GA017.EXE 7/8 1,319KB
E42GA018.EXE 8/8 263KB

2. Disk1 to Disk8 will be extracted from the compressed files E42GA011.EXE, E42GA012.EXE, ...E42GA018.EXE.
3. Double click on Disk1, then double click on setup.exe, then follow the instructions.
It will take about 5 minutes for PANALINK to be installed automatically.

Trademarks
  • Microsoft and Windows are either registered trademarks or
    trademarks of Microsoft Corporation in the United States and/or
    other countries.
  • Pentium is a registered trademark or trademark of Intel Corporation
    in the United States and/or other countries.

Banner area begins from here.

Global Home You are here:Support > containsMulti-Function Printer / Consumer FAX > containsDownload for PC interface software