Main Contents begins from here.
Products & Solutions
Please check and confirm the following FTP Server settings
[1] Please check the following settings within the device's configuration Web page
Network scanner select tool -> Configuration Web
<Server - FTP Server>
FTP Server:
- Server Address
- Protocol: {FTP / FTPS / SFTP} * 1
- Port Number * 1
* 1: Setting according to FTP Server is required
<<Configuration Web>>
[2]Please check if you can receive a PING response from the FTP Server Address using a PC via a Command Prompt (* 1)
(e.g.) ping (Server Address)
->In case of no response, the server has any problem.
Please comfirm No.1 check items or consult your network administrator / server administrator
* 1: Make sure to test on a PC other than FTP Server
[3] Please check if file can be transmitted via an PC with an FTP client with the setting same settings configured on the scanner (* 1)
->if the file is not sent, there is comunication problems with the server.
Please comfirm No.1 check items or consult your network administrator / server administrator.
* 1: Make sure to test on a PC other than FTP Server
If there are no issues with the settings listed above,, please comfirm next [4] .
[4] Please check the following settings within the device's configuration Web page.
Network scanner select tool -> Configuration Web
<Network - IP Configuration>
IP Address:
- DHCP * 1
- Auto IP
- IP Address * 1
- Subnet Mask
- Default Gateway * 2
* 1: If the following IP addresses are displayed, a server communication issue could exist.
- "169.254.0.0" to "169.254.255.255"
(IP Address set by AutoIP)
* 2: If the following IP Address is displayed, the device is most likely not able to communicate wtih the DHCP Server.
- "0.0.0.0"
If there are no issues with the settings listed above, we recommend you consult your network administrator or server administrator to confirm the following conditions.
- Server down
- Server software down
- the network route down (cable / router / hub)
- Firewall
- IP / MAC filtering
- Network communication destination regulation
Network scanner select tool -> Configuration Web
<Server - FTP Server>
FTP Server:
- Server Address
- Protocol: {FTP / FTPS / SFTP} * 1
- Port Number * 1
* 1: Setting according to FTP Server is required
<<Configuration Web>>
[2]Please check if you can receive a PING response from the FTP Server Address using a PC via a Command Prompt (* 1)
(e.g.) ping (Server Address)
->In case of no response, the server has any problem.
Please comfirm No.1 check items or consult your network administrator / server administrator
* 1: Make sure to test on a PC other than FTP Server
[3] Please check if file can be transmitted via an PC with an FTP client with the setting same settings configured on the scanner (* 1)
->if the file is not sent, there is comunication problems with the server.
Please comfirm No.1 check items or consult your network administrator / server administrator.
* 1: Make sure to test on a PC other than FTP Server
If there are no issues with the settings listed above,, please comfirm next [4] .
[4] Please check the following settings within the device's configuration Web page.
Network scanner select tool -> Configuration Web
<Network - IP Configuration>
IP Address:
- DHCP * 1
- Auto IP
- IP Address * 1
- Subnet Mask
- Default Gateway * 2
* 1: If the following IP addresses are displayed, a server communication issue could exist.
- "169.254.0.0" to "169.254.255.255"
(IP Address set by AutoIP)
* 2: If the following IP Address is displayed, the device is most likely not able to communicate wtih the DHCP Server.
- "0.0.0.0"
If there are no issues with the settings listed above, we recommend you consult your network administrator or server administrator to confirm the following conditions.
- Server down
- Server software down
- the network route down (cable / router / hub)
- Firewall
- IP / MAC filtering
- Network communication destination regulation
Banner area begins from here.
Sub Menu begins from here.