Model Name: KX-HDV230 B
Existing version: 1.005
New version: 1.062
1. New or Enhanced Features
No. Items Fix version
1-1 Improvement
The phone number of each registered SIP Line can now be verified in the handset menu
[MENU} -> [System Settings] -> [Status] -> [Line Status] -> select line
1.014
1-2 Improvement
Sampling rate of G.722 is changed from 16 kHz to 8 kHz according to RFC.
1.014
1-3 Improvement
Currently Call Forward and DND is not deletable from the Function menu.
They are changed to deletable from the Function menu.
(Base unit/Handset)
1.014
1-4 Improvement
Prepare the option to prevent web setting.
1.014
1-5 Improvement of the specification of pre-provisioning.
The change of the implication regarding Option 66 and 67 of DHCP.
1.014
1-6 Improvement of supporting RFC3264.
The device becomes to be held a call from other SIP phone supporting RFC3264.
1.014
1-7 Improvement
Just after Failover destination is determined, the device sends SUBSCRIBE to Failover destination.
1.025
1-8 Improvement
Support blank search in XSI Phonebook.
1.025
1-9 Improvement
Enhance HDV130 XML Application.

New parameter :
- XMLAPP_START_URL
- XMLAPP_INITIAL_URL
- XMLAPP_INCOMING_URL
- XMLAPP_TALKING_URL
- XMLAPP_MAKECALL_URL
- XMLAPP_CALLLOG_URL
- XMLAPP_IDLING_URL
- XML_INITIATE_KEY_SOFT1
- XML_INITIATE_KEY_SOFT2
- XML_INITIATE_KEY_SOFT3
- XMLAPP_FFKEY_ENABLE
(HDV230 already have.)
1.014
1-10 Improvement
Specify physical FF key (DSS key) order.
Bottom left is No.1 (Normal) or Upper Left is No.1 (Reverse).

New parameter :
- BUTTON_LOCATION_SETTING
1.025
1-11 Improvement
Enable / Disable Key tone by configuration file.

New parameter :
- KEY_PAD_TONE_HSy (for TGP600)
- KEY_PAD_TONE (for HDV series)
1.025
1-12 Improvement
Enhance supported number of Call-ID digits. (Up to 128 digits)
1.025
1-13 Improvement
MoH(RTP 1) and Hold tone (RTP 2) are not mixed even when server send 2 different RTP to the phone.
1.025
1-14 Improvement
Support DNS-SRV Lookup for XMPP (UC-One).

New parameter :
- UC_DNSSRV_ENA
- UC_TCP_SRV_PREFIX
1.025
1-15 Modification
Fixed issue:
Regarding SIP-PUBLISH.
- SIP PUBLISH is not sent when SSAF setting is enabled (SIP_DETECT_SSAF_n="Y").
- Improvement of the header format of SIP PUBLISH.
- Calculation method of MOS-CQ value which is contained in the VQReport of SIP-PUBLISH has error. So the calculated value is always too low as compared to actual voice quality.
1.025
1-16 Improvement
MOS-CQ value of SIP PUBLISH which is sent after a disconnected call is calculated from the MOS-CQ value of the last RTCP of a conversation. It is improved to calculate the SIP PUBLISH MOS-CQ value by the average of all RTCP from the entire conversation.
1.025
1-17 Improvement
Through provisioning, a time range can be defined using a new configuration parameter to randomly access the server to get firmware updates.

New parameter:
- FWDL_RANDOM_DURATION

Related Parameter:
- FIRM_UPGRADE_ENABLE
- FIRM_FILE_PATH
- FIRM_VERSION
1.025
1-18 Improvement
Through provisioning, a time range can be defined using a new configuration parameter to randomly access the server to get configuration file updates.

New Parameter:
- CFG_RESYNC_DURATION

Related Parameter:
- CFG_STANDARD_FILE_PATH
- CFG_PRODUCT_FILE_PATH
- CFG_MASTER_FILE_PATH
- CFG_CYCLIC
- CFG_CYCLIC_INTVL
- CFG_RESYNC_TIME
- CFG_RESYNC_FROM_SIP
- CFG_RESYNC_ACTION
1.025
1-19 Improvement
The phone number of each registered SIP Line can now be verified in the handset menu
[MENU] -> [System Settings] -> [Status] -> [Line Status] -> select line
1.014
1-20 Improvement
Call can't be transferred to Conference server when user part of CONFERENCE_SERVER_URI is longer than 63 characters.
1.025
1-21 Improvement
Prepare the option to prevent web setting.
1.014
1-22 Improvement
- The device remember the last status of Headset usage.
E.g. When Headset is used in the last call, "Redial" by pressing physical button from on-Hook state is attempted not through SP phone but through Headset.
1.025
1-23 Improvement
Specify LDAP phonebook display format.

New parameter : LDAP_DISPLAY_FORMAT
1.031
1-24 Improvement
AMR-WB description in SDP is modified.
1.031
1-25 Improvement
The phone can receive MCP(Polycom formula) more than once.
1.031
1-26 Improvement
Add Display Name for LocalID and OrigID for incoming call in VQ Monitor Tool.
1.031
1-27 Improvement
Display the version of Panasonic SIP software on WEB.
The version is managed in common over the models (HDV series and TGP600).
1.031
1-28 Improvement
Update client-certificate and private-key SHA1 to SHA2.
1.062
1-29 Improvement
Enhance XML functions
- Increase entrypoints for XML
- Add new XML-element (MissedCallOff, CancelKey)

New parameters :
- XML_SOFT_KEY_NAMEx
- XMLAPP_URL_SOFT_KEY
- XMLAPP_URL_FLEX_BUTTONx

Related parameters :
- XMLAPP_INITIAL_URL
- XML_INITIATE_KEY_SOFT1 (HDV130/230)
- XML_INITIATE_KEY_SOFT2 (HDV130/230)
- XML_INITIATE_KEY_SOFT3 (HDV130/230)
- FLEX_BUTTON_FACILITY_ACTx
- DSS_BUTTON_FACILITY_ACTx (HDV230/330)
1.062
1-30 Improvement
Change maximum number of BLF 48 to 100, then LED status indication is available up to 100.

Related parameters :
- DSS_BUTTON_FACILITY_ACTx
* "X_PANASONIC_IPTEL_BLF" assignment is available up to 100.
1.062
1-31 Improvement
When a phone checks voice mail, it can send SUBSCRIBE message including mailbox name.

New parameter:
VM_SUBSCRIBE_SPECIFIC_n
1.062
1-32 Improvement
A phone doesn't care case-sensitive search of XSI phonebook.
1.062
1-33 Improvement
A user can change "Edit" character string display in 1st line of XML Testbox.
1.062
1-34 Improvement
A phone can display other party's CLIP information on phone screen when a user makes an outgoing call with XML Trigger function.
1.062
1-35 Improvement
After a user refers call list in XML application, missed call is deleted in call list.
1.062
1-36 Improvement
A user can specify an individual URL for XLM start by soft key. Besides, a user can change soft key label.
1.062
1-37 Improvement
Add some configuration parameters to separate the update timing of the XSI phonebook data from provisioning.

New parameter:
XSI_PHONEBOOK_CYCLIC_INTVL
XSI_PHONEBOOK_RESYNC_DURATION
1.062
1-38 Improvement
LED status of the ACD key now synchronizes its status in accordance with every message sent by the server correctly.
1.062
1-39 Improvement
When TGP600/HDV begins N-way conference call, the hold music plays for the held outside caller for the entire hold duration

New config parameter:
CONF_SERVER_HOLD_ENABLE= "Y" ( default value is "N". )
1.062
1-40 Improvement
Enhance the XML function.
- Softkey name can be changed by provisioning
- Add activating XML function to the program key
1.062
1-41 Improvement
Add some functions to the program key
- Presence
- Application(to activate XML function)


New parameter:
XMLAPP_URL_FLEX_BUTTONx
1.062
1-42 Improvement
BLF number is not displayed when dialing.

'New parameter:
BLF_DISPLAY_OFF_OUTGOING
1.062
1-43 Improvement
1. Device doesn't reboot when resetting line with TR-069.
2. Line status of TR-069 is supported.
Next Version


2. Fixed Issues
No. Items Fix version
2-1 Modification
Fixed issue:
Following BLF bugs are fixed.
- BLF does not work because of the parse error of XML.
- BLF may not work correctly, when the device has some calls.
1.014
2-2 Modification
Fixed issue:
In ECO mode state, the device is not initialized even if the FactoryReset from the menu.
1.014
2-3 Modification
Fixed issue:
The device adds VLAN tag even if the tagged is off on lldp mode.
1.014
2-4 Modification
Fixed issue:
Correspondence of sip failover.
1.014
2-5 Modification
Fixed issue:
Device can not BLF call to the destination which includes alphabet.
1.014
2-6 Modification
Fixed issue:
Upon receipt of the ResourceList by re-subscribe, BLF lamp disappears.
1.014
2-7 Modification
Fixed issue:
uaCSTA (Mondago / ESTOS) bugs are fixed.
1.025
2-8 Modification
Fixed issue:
- Ignore SIP NOTFY by internal timeout in certain timing.
1.025
2-9 Modification
Fixed issue:
- Start call duration count from receiving 183 early media.
1.025
2-10 Modification
Fixed issue:
Countermeasure of following DTMF issue.
When a TGP600 handset sends DTMF in hands free mode, the handset's mic pics up the tones and transmits them. The receiving party hears each inbound DTMF twice.
1.025
2-11 Modification
Fixed issue:
Countermeasure of following DTMF issue.
During 3-way conference which is established by TPA60/65, DTMF from the handset will send to one conference party only and not the other.
1.025
2-12 Modification
Fixed SIP TLS issue.
After establishing a call by using SIP TLS, place the call on hold and then resume it,
- Operation side (TPA60/65) : Noise burst is heard.
- Other side (intended party) : Just silent.
1.025
2-13 Modification
Fixed issue:
The hold tone generated inside of the device is mixed with the received announcement, when it is connected to the announcement server of Genband.
1.025
2-14 Modification
Fixed issue:
Send no voice RTP in specific server.
1.025
2-15 Modification
Fixed issue:
- When the phone receives Re-INVITE before sending 200 OK as a reply for the initial INVITE,
the phone sends Request Pending and call is disconnected.
1.025
2-16 Modification
Fixed issue:
- HDV230 will reboot, when the choosing "MENU -> Line Status" before the SIP REGISTER is success.
1.025
2-17 Modification
Fixed issue:
- White noise after SP phone is OFF.
1.025
2-18 Modification
Fixed issue:
- The device freezes when you configure SIP-TLS and other specific settings at the same time.
1.025
2-19 Modification
Fixed issue:
- The device reboots itself when you register 15 or more BLF in specific server (Not applied Broadsoft.)
1.025
2-20 Modification
Fixed issue:
Click-To Retrieve Bugs are fixed.
1.025
2-21 Modification
Fixed issue:
The phone could not resume the paired SCA phone's hold call when it is connected to MetaSwitch.
1.025
2-22 Modification
Fixed issue:
Czech letters can't be displayed in XSI Phonebook.
1.031
2-23 Modification
Fixed issue:
In IPV4/IPV6 dual settings, AAAA look up doesn't work when IPV4 address is assigned to the phone before IPV6 is assigned.
1.031
2-24 Modification
Fixed issue:
The phone can't download configuration file from option66, when fail download from option160.
1.031
2-25 Modification
Fixed issue:
The phone can't receive configuration file from option66 in while pre-provisioning , when there is conflict with DHCP request timing.
1.031
2-26 Modification
Fixed issue:
When REFER transfer is operated, the phone doesn't display the updated information from INVITE including Replaces header.
1.062
2-27 Modification
CSTA bugs are fixed.

Fixed issue:
- Can't answer incoming call from over 10 digits telephone number.
- Call information (Caller / Called) becomes reversed when the call is established.
1.062
2-28 Modification
Fixed issue:
There are cases where HTTPS provisioning (Client Certificate) fails when the provisioning server is MS IIS.
1.062
2-29 Modification
Fixed issue:
There is a case that the phone does not restart when the restart target parameters has changed in the config download.
1.062
2-30 Modification
Fixed issue:
There are cases where SIP process is deadlocked by sending SIP message and receiving the hole punching packet at the same time.
1.062
2-31 Modification
Fixed issue:
A phone can't answer an incoming call which has phone number over 10 digits on uaCSTA.
1.062
2-32 Modification
Fixed issue:
A phone exchanges information about calling party and called party on uaCSTA after answering an incoming call.
1.062
2-33 Modification
Fixed issue:
A call is disconnected when an other line is selected while having a conversation even on AUTO_CALL_HOLD="Y".
1.062
2-34 Modification
Fixed issue:
A phone can't communicate with a cell phone even when AMR-WB is configured.
1.031
2-35 Modification
Fixed issue of TR-069: Uptime is incorrect.
1.062
2-36 Modification
Fixed issue:
Ring back tone rings against RINGBACK_TONE_TIMING configuration.
1.062
2-37 Modification
Fixed issue:
There are cases that the terminal does not send invite when it receives refer.
1.062
2-38 Modification
Fixed issue:
There are cases where HTTPS provisioning fails when the terminal starts up after factory reset operation.
1.062
2-39 Modification
Fixed issue:
Dial plan bug fixed.
1.062
2-40 Modification
Fixed issue:
When importing a config file via WebUI that has any parameter mistake, an error will be displayed.
1.062
2-41 Modification
Fixed issue:
BLF doesn't work after a phone in factory reset imports configuration file from provisioning server.
1.062
2-42 Modification
Fixed issue:
A phone continue to seize line even after a call is terminated.

New parameter:
SHARED_STOP_LINE_SEIZE
1.062
2-43 Modification
Fixed issue:
1) Once update firmware to default firmware by accessing to Redirection server, below configuration parameters are specified automatically.
- CFG_STANDARD_FILE_PATH="https://provisioning.e-connecting.net/redirect/conf/{mac}.cfg"
- FIRM_FILE_PATH="http://fw-provi.e-connecting.net/firm/000/HDVx30-yy.zzz.fw"
- FIRM_VERSION="HDVx30-yy.zzz"
note) yy.zzz is firmware version of default firmware on Redirection server
2) After restart or Power cycle, access to Redirection server.
3) Compare current firmware version with default firmware version.
4) If default firmware version is higher , the phone update firmware.
1.062
2-44 Modification
Fixed issue: Some of Cyrillic alphabet is mistake.
1.062
2-45 Modification
Fixed issue: Some words of Russian menu are mistranslation.
1.062
2-46 Modification
Fixed issue:
There are cases that the transfer function doesn't work when the terminal receives invite including replace.
1.062
2-47 Modification
Fixed issue:
The one way audio occurs when the terminal receives invite including replace.
1.062
2-48 Modification
Fixed issue:
There are cases registration-loss occurs.
1.062
2-49 Modification
Fixed issue:
The call can't be released with the sequence below.
1. Sending "session timer reInvite"
2. Receiving "Bye"
3. Receiving "200OK of ReInvite"
1.062
2-50 Modification
Fixed issue of TR-069:
1. Config file download is failed (Error 9015).
2. Periodic Inform isn't executed when PERIODIC INTERVAL is set more than 24 hours.
1.062
2-51 Modification
Fixed issue:
When importing a config file via WebUI that has any parameter mistake, an error will be displayed.
1.062
2-52 Modification
Fixed issue:
In case of TGP600 use TCP and no massage during 120[s], failed INVITE messages (failed with 408 responses back from the SBC) after 120[s] .
->[Modification]the keep-alive time will be changed in the Panasonic phone dynamically based on the SBC expire time received in the 200 OK register.
1.062
2-53 Modification
Fixed issue:
Cancel key is not available when a user is transferring a call.
1.062
2-54 Modification
Fixed issue:
Remote ID information of the first call for SIP Publish is changed to remote ID information of the second call when completing ghee transfer of originating call.
1.031
2-55 Modification
Fixed issue:
Outgoing call log can't be open while hearing second dial tone when holding blind transfer.
1.025


3. Known Issues
No. Items Fix version
3-1 None

close