| Model Name: | KX-HDV230 B |
|---|---|
| Existing version: | 1.062 |
| New version: | 3.004 |
| No. | New or Enhanced Feature | Version |
|---|---|---|
| 1-1 |
Improvement Certificate overview is displayable via TR-069 management using Vendor Specific parameter. |
2.105 |
| 1-2 |
Improvement 1. Device doesn't reboot when resetting line with TR-069. 2. Line status of TR-069 is supported. |
2.105 |
| 1-3 |
Improvement Sending SIP-PUBLISH after each SSRC change during a conversation. Related config parameter: Following settings are needed. VQREPORT_SEND="1" |
2.105 |
| 1-4 |
Improvement Sending SIP-PUBLISH after each codec change during a conversation. New config parameter: VQREPORT_SEND_OPT_CODEC_ENABLE Related config parameter: Following settings are needed. VQREPORT_SEND="1" |
2.105 |
| 1-5 |
Improvement Sending SIP-PUBLISH after each network condition change during a conversation. New config parameter: VQREPORT_SEND_OPT_NW_CHANGE Related config parameters: ALERT_REPORT_TRIGGER ALERT_REPORT_MOSQ_CRITICAL ALERT_REPORT_MOSQ_WARNING Following settings are needed. VQREPORT_SEND="1" |
2.105 |
| 1-6 |
Improvement Improved DTMF impact to MOS score. |
2.105 |
| 1-7 |
Improvement Shortening the setting time of TR069 SPV |
2.105 |
| 1-8 |
Improvement When a phone holds a call during the other call, a user can switch to the call on hold by pressing HOLD key. |
2.105 |
| 1-9 |
Improvement to hide the FWD/DND from menu. New config parameter: FWD_DND_MENU_ENABLE |
2.105 |
| 1-10 |
Improvement for Dial Plan - dial plan apply for Manual Dial from key pad (post dial, predial) - dial plan does NOT apply for Memory Dial (phonebook, call log, One-touch key dial, Hot key dial) New config parameter: DIALPLAN_MEMORY_DIAL_ENABLE |
2.105 |
| 1-11 |
Improvement to hide the Call Settings from menu. New config parameter: CALL_SETTINGS_MENU_ENABLE |
2.105 |
| 1-12 |
Improvement Increase the number of configuration parameters that can be export from the Web setting. |
2.105 |
| 1-13 |
Improvement Support the Microsoft Windows10/Edge browser. |
2.105 |
| 1-14 |
Improvement select how to register the numbers of Outgoing call, which is replaced by Dial plan or inputted. New config parameter: DIALPLAN_REPLACE_LOG_ENABLE |
2.105 |
| 1-15 |
Improvement : Assign TCP port number randomly in SIP-TLS. |
2.105 |
| 1-16 |
Improvement Strengthening of encryption strength 1)Digital signature: SHA384 2)RSA encryption key length: 4096 bits |
2.105 |
| 1-17 |
Improvement : Support CDP(Cisco Discovery Protocol) New config parameter: CDP_ENABLE CDP_INTERVAL |
2.105 |
| 1-18 |
Improvement : Group call pickup allows users to pick up incoming calls within their own group. |
2.105 |
| 1-19 |
Improvement : A user can barge in a call by pressing BLF key, 'New config parameter: NUM_PLAN_BARGE_IN |
2.105 |
| 1-20 |
Improvement Support Hotel phone specification New configuration parameter: DISCLOSE_FUNCTION_ENABLE VM_FUNCTION_ENABLE SOFT_KEY_QUICK_DIALx SOFT_KEY_LABELx |
2.105 |
| 1-21 |
Improvement Cease to restart main unit every time uaCSTA becomes enable on wireless handset. Related configuration parameter: UACSTA_ENABLE_n |
2.105 |
| 1-22 |
Improvement SIP-TLS is once disconnected when some parameters are changed. |
2.105 |
| 1-23 |
Improvement Behavior by physical 'ENTER' key becomes same as behavior of XML 'OK'. |
2.105 |
| 1-24 |
Improvement Character type '0-9' and 'ABC' can be selected. |
2.105 |
| 1-25 |
Improvement Redial key can be configurable in XML so that redial number can be assigned from sever call log. New configuration parameter: XMLAPP_URL_REDIAL_KEY |
2.105 |
| 1-26 |
Improvement In dial plan input, allowed NULL replacement format, such as "<#:>". |
2.105 |
| 1-27 |
Improvement Changed translation of March in German from 'Mrz' to 'M�rz'. |
2.105 |
| 1-28 |
Improvement When a phone receives a call while a user is calling to the other party, the user needs to press CANCEL key twice to cancel the calling call. Improved the times of pressing CANCEL key to once. New configuration parameter: CANCEL_OPERATON_MODE |
2.105 |
| 1-29 |
Improvement Application log in TGP/HDV can be sent to SYSLOG server. (When wireless handset can't be registered in TGP600, the result can be logged.) New configuration parameter: SYSLOG_OUT_START |
2.105 |
| 1-30 |
Improvement Support Safari web browser. |
2.105 |
| 1-31 |
Improvement Operational value can be sent to SYSLOG server by pushing special code from handset. New configuration parameter: SYSLOG_OUT_START |
2.105 |
| 1-32 |
Improvement Supported Packet Sniffer function |
2.105 |
| 1-33 |
Improvement Supported Remote Interface of Wireshark New configuration parameter: PCAP_ENABLE PCAP_REMOTE_ID PCAP_REMOTE_PASS PCAP_REMOTE_PORT |
2.105 |
| 1-34 |
Improvement A user can confirm telephone number on line by easy operation, holding down 'Down' key. |
2.105 |
| 1-35 |
Improvement Off-hook monitor can be configurable to disable. New configuration parameter: OFF_HOOK_MONITOR_ENABLE |
2.105 |
| 1-36 |
Improvement Group Paging of BroadWorks. Ability to specify how to handle the 1st active call when phone has the call and receives INVITE with answer-after=0. New parameter: S IGNALING_AUTO_ANS_ENABLE_n |
2.105 |
| 1-37 |
Improvement Phonebook is downloaded with HTTP GET when device boots up. New configuration parameter: XML_PHONEBOOK_URL XML_PHONEBOOK_CYCLIC_INTVL |
2.105 |
| 1-38 |
Improvement Device starts ringing with delay of designated time when incoming call arrives. New configuration parameter: DELAY_RING_TIME_n |
2.105 |
| 1-39 |
Improvement The rest of participants can continue the call if organizer terminates 3 way conference. New configuration parameter: CONF_OWNER_OUT_ENABLE |
2.105 |
| 1-40 |
Improvement Support Private hold feature for Shared Line Appearance of Metaswitch. New configuration parameter: PRIVATE_HOLD_ENABLE |
2.105 |
| 1-41 |
Improvement Support "No touch provisioning" of Broadsoft |
2.105 |
| 1-42 |
Improvement Support "Flexible Seating" of Broadsoft New configuration parameter: UC_HOTELING_MODE UC_FLEXIBLESEATING_UNLOCKPIN |
2.105 |
| 1-43 |
Improvement Support character input timeout New configuration parameter: AUTO_INPUT_KEY_TIME |
2.105 |
| 1-44 |
Improvement Support On-Hook call by pressing # key New configuration parameter: START_DIAL_POUND_KEY |
2.105 |
| 1-45 |
Improvement Support Ring Splash |
2.105 |
| 1-46 |
Improvement Panasonic RootCA is embedded in device. |
2.105 |
| 1-47 |
Improvement We modified not to stop call following case. 1) Send Invite and receive 407. 2) Send Invite and receive 302 3) Send Invite and receive 407 |
2.105 |
| 1-48 |
Improvement The status of SRTP call is displayed on LCD. New configuration parameter: DISPLAY_SRTP_CALL_ENABLE |
2.200 |
| 1-49 |
Improvement Supporting HTTP PUT of logging data feature. (Putting logging data of device to specific server with HTTP protocol.) New configuration parameter: BOOTLOG_SERVER_URI |
3.004 |
| 1-50 |
Improvement Adding feature of enabling/disabling displaying MWI information to LED/LCD. Related configuration parameter: NOTIFICATION_MENU_ENABLE <LCD> NOTIFY_MISSEDCALL_ENABLE (HDV130/230/330/430) NOTIFY_VOICEMAIL_ENABLE (HDV130/230/330/430) NOTIFY_NETWORKCAMERA_ENABLE (HDV430) NOTIFY_MISSEDCALL_ENABLE_HSy (TGP600) NOTIFY_VOICEMAIL_ENABLE_HSy (TGP600) <LED> NOTIFY_MISSEDCALL_LED_ENABLE (HDV130/230/330/430) NOTIFY_VOICEMAIL_LED_ENABLE (HDV130/230/330/430) NOTIFY_NETWORKCAMERA_LED_ENABLE (HDV430) NOTIFY_MISSEDCALL_LED_ENABLE_HSy (TGP600) NOTIFY_VOICEMAIL_LED_ENABLE_HSy (TGP600) |
3.004 |
| 1-51 |
Improvement Ringing Message Waiting Alert Tone when receiving second voice mail or later. (Previously version: Message Waiting Alert Tone rings only for first voice mail.) Related configuration parameter: NOTIFICATION_MENU_ENABLE New configuration parameter: <Tone> NOTIFY_VOICEMAIL_ALARM_ENABLE (HDV130/230/330/430) NOTIFY_NETWORKCAMERA_ALARM_ENABLE (HDV430) NOTIFY_VOICEMAIL_ALARM_ENABLE_HSy (TGP600) NOTIFICATION_ALARM_TYPE |
3.004 |
| 1-52 |
Improvement Displaying line class (Shared Line or not) of free line when using line status menu. [ Handset Firmware Version ] -TPA60: Ver.03.00.002 -TPA65: Ver.03.00.002 -UDT121: Ver.06.07.005 -UDT131: Ver.06.07.005 |
3.004 |
| 1-53 |
Improvement Supporting displaying Line Status feature for HDV130. |
3.004 |
| 1-54 |
Improvement Supporting Enhanced Call Park of Metaswitch. (TGP600 and HDV series phone already support Basic Call Park of Metaswitch since first production.) New configuration parameter: CALLPARK_METHOD CALL_PARK_PROG_KEY_MODE |
3.004 |
| 1-55 |
Improvement Supporting Group paging of Metaswitch. |
3.004 |
| 1-56 |
Improvement Shortening the time of responding 180Ringing after sending 100Trying. Related config parameters: SEND_180_ALERT_ENABLE |
3.004 |
| 1-57 |
Improvement Reduce of the procedure for displaying search result of phonebook by narrowing search result with inputting each 1 character. New configuration parameter: NW_PHONEBOOK_ADVANCED_SERACH |
3.004 |
| 1-58 |
Improvement Increase the number of string of XML label from 16 to 32. |
3.004 |
| 1-59 |
Improvement Supporting crypto header for RTP/SRTP mode. (Previously for SRTP mode only) Modified configuration parameter: SRTP_CONNECT_MODE_n Change max value range 2 to 3. |
3.004 |
| 1-60 |
Improvement Supporting feature of removing ECO Mode from menu. New configuration parameter: ECO_MODE_MENU_ENABLE |
3.004 |
| 1-61 |
Improvement Supporting more than 5 characters in soft key of XML application. Modified configuration parameter: XML_SOFT_KEY_NAMEx Change max value range 5 to 16 |
3.004 |
| No. | Fixed issue | Version |
|---|---|---|
| 2-1 |
Modification Fixed issue: Delay of audio connection (2 seconds) when answering hunt group call. New config parameter: SIP_INC_INVITE_RTP_MODE_n |
2.105 |
| 2-2 |
Modification Fixed issue: Server announcement is cut off when user dials *XX for CF feature. |
2.105 |
| 2-3 |
Modification Fixed issue: There are cases, it lose registration at the constant period when SIP TLS setting is enabled. |
2.105 |
| 2-4 |
Modification Fixed issue: The device reboots before sending response for setting parameters with reboot process like parameter for VLAN. |
2.105 |
| 2-5 |
Modification Fixed issue: TR069 process doesn't start when setting ACS server address. |
2.105 |
| 2-6 |
Modification Fixed issue: There are cases, it lose registration automatically when fail over occurs. |
2.105 |
| 2-7 |
Modification Fixed issue: Call drops in five minutes when the call is started with CPAT. |
2.105 |
| 2-8 |
Modification Fixed issue: Browsers are automatically caching the login credentials irrespective of any "remember this password' settings. -> we added Logout button on WEB-GUI |
2.105 |
| 2-9 |
Modification Fixed issue: The phone number that was searched from network phone book is not displayed on the dial screen. |
2.105 |
| 2-10 |
Modification Fixed issue: Server announcement is cut off when user dials *XX for CF feature. Additional modification for during 183 status. |
2.105 |
| 2-11 |
Modification Fixed issue: The handset becomes that it cannot accept any key pushing after pushing the [power/cancel] key during 183 status and having CW incoming call at the same time. |
2.105 |
| 2-12 |
Modification Fixed issue : BLF key's LED and LCD could not indicate the target phone's status in following case. 1) The phone is connected to the original platform SIP server (except Asterisk and Broadsoft). 2) The phone is connected to the server based on Asterisk or Broadsoft, and when the target phone has a call with outside phone like PSTN. |
2.105 |
| 2-13 |
Modification Fixed issue: When a phone calls and receives '200 OK', call information in PAI header of '200 OK' is not displayed correctly. |
2.105 |
| 2-14 |
Modification Fixed issue: When you attempt call hold you can hear noise with setting SRTP only. Related config parameter: SRTP_CONNECT_MODE_n (0:SRTP, 1:RTP/SRTP(default)) |
2.105 |
| 2-15 |
Modification Fixed issue: BLF Label name is not displayed correctly in DISPLAY_CALL_KEY_ENABLE="Y". |
2.105 |
| 2-16 |
Modification Fixed issue: After on hook while line status showing and call waiting call receiving, sometimes the phone cannot disconnect the active call. (TPA65, HDV230 only) |
2.105 |
| 2-17 |
Modification Fixed issue: When displaying RootCA information in Web GUI, display area is too narrow to display all the information. |
2.105 |
| 2-18 |
Modification Fixed issue: When the phone receives many incoming calls in a very short period, there is a case the phone reboots. |
2.105 |
| 2-19 |
Modification Fixed issue: We modified WEB gui that are effected by CDP. |
2.105 |
| 2-20 |
Modification Fixed issue: We modified WEB gui that are effected by GroupPickup. |
2.105 |
| 2-21 |
Modification Fixed issue: Soft key assigned XML start works other than in idle state. |
2.105 |
| 2-22 |
Modification Fixed issue: When a phone receives a call, call information in PAI header' is displayed even though CNIP_FROM_ENABLE=�Y�. |
2.105 |
| 2-23 |
Modification Fixed issue: DTMF can be heard when configuration of DTMF_METHOD_n is RFC2833 or SIP INFO. New configuration parameter: DTMF_OUT_ENABLE |
2.105 |
| 2-24 |
Modification Fixed issue: Incoming call does not stop immediately even though the call is canceled in case of multi line setting. |
2.105 |
| 2-25 |
Modification Fixed issue: Modify to work correctly when the dial plan includes Macro timer and DIAL_PLAN_NOT_MATCH_ENABLE is set as Y. |
2.105 |
| 2-26 |
Modification Fixed issue: Line Status of TR-069 isn't displayed correctly New configuration parameter: TR069_REGISTERING TR069_REGISTERED |
3.004 |
| 2-27 |
Modification Fixed issue: Result of Traceroute and Ping of TR-069 isn't correct. |
3.004 |
| 2-28 |
Modification Fixed issue: There is a case that the some data are missing when the phone sends syslog to the server. |
2.105 |
| 2-29 |
Modification Fixed issue: In spite of setting FWD busy, the phone doesn't transfers the incoming call when the session is full. We modified that the phone transfers the incoming call while establishing call when setting FWD busy. |
2.105 |
| 2-30 |
Modification Fixed issue: When setting shared call as enable under Metaswitch environment, the phone fails to attempt outgoing call. |
2.105 |
| 2-31 |
Modification Fixed issue: FWD/DND key and Message key aren't available when default line becomes out of registration. |
2.105 |
| 2-32 |
Modification Fixed issue: A number of automatically assigned BLF is less than the specification. |
2.105 |
| 2-33 |
Modification Fixed issue: When a phone receives a call, it doesn't send '180 RINGING'. |
2.105 |
| 2-34 |
Modification Fixed issue: When you catch a call to shared number on a phone, the other phones continue to ring. |
2.105 |
| 2-35 |
Modification Fixed issue: You can't hear any voice (No RTP) in call of shared number. |
2.105 |
| 2-36 |
Modification Fixed issue: BLF doesn't work correctly after provisioning though it works after rebooting. |
2.105 |
| 2-37 |
Modification Fixed issue: When you press "System Setting" menu, a phone freezes while displaying "Please Wait". |
2.105 |
| 2-38 |
Modification Fixed issue: When using XML phonebook, "?" isn't attached after phonebook URL. |
2.105 |
| 2-39 |
Modification Fixed issue: DND setting is not synchronous to server after failover. |
2.105 |
| 2-40 |
Modification Fixed issue: Changing line for same line (Shared) by pushing LINE key is failed. |
2.105 |
| 2-41 |
Modification Fixed issue: Transferred call is terminated with blind transfer of incoming call from non-SIP device. |
2.105 |
| 2-42 |
Modification Fixed issue: Call is terminated after about 25 sec from starting conversation. (Server terminates call because device only sends "100 Trying" to "reINVITE". ) |
2.105 |
| 2-43 |
Modification Fixed issue: Server authentication is failed when server uses SSL re-session. |
2.105 |
| 2-44 |
Modification Fixed issue: Device doesn't originate by dialing target dial set with repeat of dial plan. |
2.105 |
| 2-45 |
Modification Fixed issue: "Forward No Answer" doesn't act. |
2.105 |
| 2-46 |
Modification Fixed issue: Device can't terminate incoming call when picking up call waiting during call with the device doesn�t' have call hold capability. |
2.105 |
| 2-47 |
Modification Fixed issue: Device can't return to standby status by pressing "Cancel" Softkey when hearing busy tone with busy of transfer target. |
2.105 |
| 2-48 |
Modification Fixed issue: Incoming ringer doesn't ring when recall arrives after terminating incoming call answered during temporary holding. |
2.105 |
| 2-49 |
Modification Fixed issue: Incoming LED doesn't go off with flashing when answering against recall of hold call while talking to outside call. |
2.105 |
| 2-50 |
Modification Fixed issue: There are some display errors in Cyrillic. |
2.105 |
| 2-51 |
Modification Fixed issue: Opposite party executes call hold and call release after CallPickup. Then call is terminated with transfer side answers against call transferred automatically. |
2.105 |
| 2-52 |
Modification Fixed issue: REGSTER isn't send when SIP related parameters becomes available with SPV of TR-069. |
2.105 |
| 2-53 |
Modification Fixed issue: Display name isn't displayed on LCD of opposite party if long character string is set in DISPLAY_NAME. |
2.105 |
| 2-54 |
Modification Fixed issue: Display of Soft Key is different from real action after setting specific configuration parameter. |
2.105 |
| 2-55 |
Modification Fixed issue: Device reboots by setting XSI parameters without registration SIP account. |
2.105 |
| 2-56 |
Modification Fixed issue: SIP account completes SIP registration during receiving multicast paging of emergency. But "Error 003 (Non registration)" is displayed after stopping multicast paging. |
2.105 |
| 2-57 |
Modification Fixed issue: CallWaiting doesn't arrive when executing on-hook after opening LineStatus screen during CallWaiting arrives. Also original call can't be terminated. |
2.105 |
| 2-58 |
Modification Fixed issue: Pop noise occurs when changing protocol from RTP to SRTP. |
2.105 |
| 2-59 |
Modification Fixed issue: Response is slow for BLF settings of MetaSwitch server. |
2.105 |
| 2-60 |
Modification Fixed issue: Display characters of "Registering" is wrong in Spanish at boot up. |
2.105 |
| 2-61 |
Modification Fixed issue: The second call can't come up and the first call can't be terminated, when answering to the first call and terminating it with displaying Line Status screen in the status having 2 incoming calls. |
2.105 |
| 2-62 |
Modification Fixed issue: Redial is executed without displaying outgoing call log even if "REDIALKEY_CALLLOG_ENABLE" is set to "Y". |
2.105 |
| 2-63 |
Modification Fixed issue: The icon of Group Pickup is wrong. |
2.105 |
| 2-64 |
Modification Fixed issue: Time display of standby screen doesn't gain time after finishing Multicast paging and general call. |
2.105 |
| 2-65 |
Modification Fixed issue: When user shows line status while receiving multiple incoming call, a phone become not to be able to answer remaining call after one caller CANCEL the call. |
2.105 |
| 2-66 |
Modification Fixed issue: Voice path is connected to SP phone even though the phone is in Headset mode, when the user resumes the held call by pushing LINE key. (HDV230 V02.100 only has this issue) |
2.105 |
| 2-67 |
Modification Fixed issue: The handset can only hear garbled noise, when the SRTP connect mode setting is specified as SRTP only. Related configuration parameter: SRTP_CONNECT_MODE_n (0:SRTP, 1:RTP/SRTP(default)) |
2.105 |
| 2-68 |
Modification Fixed issue: Spelling mistake of CANCEL_OPERATION_MODE parameter as CANCEL_OPERATON_MODE. New configuration parameter: CANCEL_OPERATION_MODE |
2.200 |
| 2-69 |
Modification Fixed issue: The device cannot send DTMF after receiving 183 while outgoing call. New configuration parameter: SIP_183_TALK_ENABLE |
2.200 |
| 2-70 |
Modification Fixed issue: The device cannot work correctly when CANCEL_OPERATON_MODE is set as 1. |
2.200 |
| 2-71 |
Modification Fixed issue: The Safari browser does not show correctly. |
2.200 |
| 2-72 |
Modification Fixed issue: The device replies 488 when receiving INVITE whose SDP has 2 m line. |
2.200 |
| 2-73 |
Modification Fixed issue: The device replies 491 instead of 500 when receiving re-INVITE before receiving ACK. |
2.200 |
| 2-74 |
Modification Fixed issue: Remaining LED lighting of LINE key after hang up the call. |
3.004 |
| 2-75 |
Modification Fixed issue: Status of off hook and originating call isn't displayed when using line status menu in Shared Line. |
3.004 |
| 2-76 |
Modification Fixed issue: The parameter of "m" in SDP of 200Ok is lost when receiving INVITE having m=video 0 RTP/AVP in SDP. |
3.004 |
| 2-77 |
Modification Fixed issue: When changing IP address assignment method from DHCP to Static with SPV (Set Parameter Value) of TR-069, IP address information isn�t set (IP address, Subnet, DefaultGateway). |
3.004 |
| 2-78 |
Modification Fixed issue: Error occurs when sending SIP TLS data to Redwood server. |
3.004 |
| 2-79 |
Modification Fixed issue: IP address doesn't become 192.168.0.241/24 in maintenance mode. |
3.004 |
| 2-80 |
Modification Fixed issue: Recall doesn't occur when executing off hook and on hook while listening busy tone after call is transferred to busy destination. |
3.004 |
| 2-81 |
Modification Fixed issue: When 3 way conference is executed with the device that holds call, opposing devices become unable to talk by clicking "Answer" key of Broadsoft web against hold call. |
3.004 |
| 2-82 |
Modification Fixed issue: When call is being established between 2 devices, call is disconnected with receiving multicast paging. |
3.004 |
| 2-83 |
Modification Fixed issue: When device is held while talking with IPv6, inactive isn't set in SDP. |
3.004 |
| 2-84 |
Modification Fixed issue: There is a case that ringtone doesn't ring when incoming call arrives with Shard Line. |
3.004 |
| No. | Fixed issue | Fix version |
|---|---|---|
| - | None | - |