| Model Name: | KX-HDV430 NE/X/C |
|---|---|
| Existing version: | 3.105 |
| New version: | 5.001 |
| No. | New or Enhanced Feature | Version |
|---|---|---|
| 1-1 |
Improvement Additional Failsafe: Automatic reboot. New configuration parameter: ERROR_AUTO_REBOOT_TIME 0, 1 to 72(hours) (0:Disable) (default:0) |
5.001 |
| 1-2 |
Improvement Additional Failsafe: Additional Logging: Output critical error logs without any configuration changing. |
5.001 |
| 1-3 |
Improvement Supporting configuration parameter to specify ringer volume level. New configuration parameter: RINGER_VOLUME_LEVEL |
5.001 |
| 1-4 |
Improvement Fixing ringer volume revel. - Reject user operation modifying ringer volume revel. - Does not display "Ringer Volume" and "Ring On Charger" in "Incoming Option" menu. - Reject user operation enabling Silent Mode. New configuration parameter: RINGER_VOL_OPERATION_ENABLE |
5.001 |
| 1-5 |
Improvement Supporting configuration parameter to specify function for soft key in talking condition. New configuration parameter: TALKING_SOFT_KEY_A TALKING_SOFT_KEY_B TALKING_SOFT_KEY_C |
5.001 |
| 1-6 |
Improvement Improve the specification of User Interface for KX-HDV330/430. Supporting "Line display" and "Combine display" as additional new home display. New configuration parameter: HOME_DISPLAY_TYPE FUNCTION_DISPLAY_TYPE FOCUS_OPERATION_ENABLE INCOMING_DISPLAY_ENABLE DISPLAY_AUTO_CHANGE_ENABLE NOTIFY_FUNC_KEY_ENABLE NOTIFY_DSS_KEY_ENABLE FORWARD_INCOMING_SOFTKEY_ENABLE SHARED_LINE_ICON_ENABLE IDLE_SOFT_KEY_1 IDLE_SOFT_KEY_2 IDLE_SOFT_KEY_3 IDLE_SOFT_KEY_4 TALKING_SOFT_KEY_1 TALKING_SOFT_KEY_2 TALKING_SOFT_KEY_3 TALKING_SOFT_KEY_4 |
5.001 |
| 1-7 |
Improvement Supporting Teles Callpark. Ability to specify Enable or disable to the subscribe for each callpark area. New configuration parameter: SUBS_CALLPARK_AREA_ENABLE |
5.001 |
| 1-8 |
Improvement Supporting configuration parameter to Enable or disable the resync duration when the phone reboot. New configuration parameter: CFG_BOOTUP_DURATION_ENABLE |
5.001 |
| 1-9 |
Improvement Supporting the phone can receive INVITE with P-Access-Network-Info (especial the INVITE from mobile phone). |
5.001 |
| 1-10 |
Improvement The information of status Bar of HDV330/430 blinks during call state. |
5.001 |
| 1-11 |
Improvement Number of Missed call is shown on the LCD. |
5.001 |
| 1-12 |
Improvement Regarding presence feature, these improvements are implemented. 1) Start up Myphone status can be set by configuration parameter. 2) Other party status can monitor while invisible status New configuration parameter: PRESENCE_MYPHONE_STATUS PRESENCE_INVISIBLE_ENABLE |
5.001 |
| 1-13 |
Improvement Implement Quick Search (like T9). New configuration parameter: PB_QUICK_SEARCH_ENABLE |
5.001 |
| 1-14 |
Improvement Control Auto Answer function by configuration parameters. New configuration parameter: AUTO_ANS_ENABLE AUTO_ANS_OPER_ENABLE AUTO_ANS_DEVICE AUTO_ANS_DELAY |
5.001 |
| 1-15 |
Improvement Enable to pass through the packet that has VLAN tag to PC port. New configuration parameter: VLAN_EGTAG_PC_ENABLE(default: N) |
5.001 |
| 1-16 |
Improvement Change default value for DST, summer time, configuration parameter. Modified configuration parameter: DST_STOP_MONTH (default value: 10 -> 11) DST_STOP_ORDINAL_DAY (default value: 2 -> 1) |
5.001 |
| 1-17 |
Improvement Supporting to add refresher for outgoing INVITE to complete session timer negotiation. New configuration parameter: SIP_REFRESHER_n (default: 0) 0:Do not add the refresher parameter 1:Add the refresher parameter with the value "UAS" 2:Add the refresher parameter with the value "UAC" |
5.001 |
| 1-18 |
Improvement Remove prefix, "+", from received phone number when the phone receives international call. New configuration parameter: REMOVE_PREFIX_ENABLE (default: N) Related configuration parameter: COUNTRY_CALLING_CODE |
5.001 |
| 1-19 |
Improvement Enhanced failover improvement. Receiving 408 response from the server is applied as the trigger for failover. New configuration parameter: ENH_FOVR_408_ENABLE_n (default: N) |
5.001 |
| 1-20 |
Improvement When the device receives 403 as a response for INVITE, it sends REGISTER to the server immediately. New configuration parameter: INVITE_403_REGSEND_ENABLE_n (default: N) |
5.001 |
| 1-21 |
Improvement The phone accepts HTTP POST sent from specified IP address only. New configuration parameter: XMLAPP_RCV_IP_ADDRESSx (x=1-20) Related configuration parameter: XMLAPP_ENABLE XML_HTTPD_PORT |
5.001 |
| 1-22 |
Improvement Supporting RFC3986. For instance, "(" and ")" contained in SIP header are replaced by %28 and %29. New configuration parameter: ESCAPECODE_CONVERSION_RFC3986 (default: N) |
5.001 |
| 1-23 |
Improvement In order to enable to disconnect current call when retrieving transfer/conference hold by LINE key, new configuration parameter is added. New configuration parameter: RETRIVE_TRANS_HOLD_OPER_CHANGE |
5.001 |
| 1-24 |
Improvement We changed the Not Open's configuration parameter to Open. Improvement Support fail over(Redundancy) Parameter Name: - ENH_FOVR_ENABLE_n - ENH_FOVR_RANDOM_TIMER_n - ENH_FOVR_RANDOM_MAX_TIME_n - ENH_FOVR_RANDOM_MIN_TIME_n Related Parameter: - SIP_FOVR_NORSP_n - SIP_FOVR_MODE_n - SIP_FOVR_DURATION_n - SIP_FOVR_MAX_n |
5.001 |
| 1-25 |
Improvement We changed the Not Open's configuration parameter to Open. Parameter Name: - BLOCK_CID_MENU_ENABLE - CNIP_CALL_PAI_ENABLE - DISPLAY_VM_WITH_NUMBER - FWD_DND_MISSEDLOG_ENABLE |
5.001 |
| 1-26 |
Improvement Enhanced security of SRTP by lengthening encrypted key. |
5.001 |
| No. | Fixed issue | Version |
|---|---|---|
| 2-1 |
Modification Fixed issue: CSTA message is incorrect in case of attendant transfer. |
5.001 |
| 2-2 |
Modification Fixed issue: There is a case, SIP server timeout occurs while sending INVITE to the device, when the device has LDAP setting and searching time of LDAP server is longer than SIP server's timer. |
5.001 |
| 2-3 |
Modification Fixed issue: The phone does not re-try when the phone receive 503 without Retry-After header from server. |
5.001 |
| 2-4 |
Modification Fixed issue: The head of voice is interrupted in case of KX-HDV430 call KX-NTV150. |
5.001 |
| 2-5 |
Modification Fixed issue: When KX-HDV430 responses the incoming call during occurring a camera alarm, the phone does not display the camera display. |
5.001 |
| 2-6 |
Modification Fixed issue: Even though KX-HDV430 hang up the video call with Network camera, the display of camera keeps displaying. |
5.001 |
| 2-7 |
Modification Fixed issue: If KX-HDV430 receive the Multicast Paging during displaying the monitor of network camera, the call counters does not start from 0:00:00. |
5.001 |
| 2-8 |
Modification Fixed issue: When the phone receive a plural Multicast Paging, the phone needs more than 8 sec to playback the Multicast Paging. Or the phone can not receive a new Multicast Paging. |
5.001 |
| 2-9 |
Modification Fixed issue: For example, under emergency number is set "1234" and then make a call with "1" or "12" or "123", the phone does not outgoing call. |
5.001 |
| 2-10 |
Modification Fixed issue: The device ignores UPDATE packet when its status is incoming. |
5.001 |
| 2-11 |
Modification Fixed issue: The device ignores INVITE message when Diversion header length is longer than 512byte. This case might occur, when the call comes to the 4th CC at the call center. |
5.001 |
| 2-12 |
Modification Fixed issue: TR069 Function. The CPE does not send 4 VALUE CHANGE for Device.Info.UpTime. This issue was found when motive verification. |
5.001 |
| 2-13 |
Modification 'Fixed issue: TR069 Function. Time zone setting is missed as UTC when getting CurrentLocalTime. 'This issue was found when motive verification. |
5.001 |
| 2-14 |
Modification 'Fixed issue: TR069 Function. Time zone setting is missed as UTC when sending CurrentTime by Inform. 'This issue was found when motive verification. |
5.001 |
| 2-15 |
Modification Fixed issue: TTL value contained in twamp packet is incorrect. |
5.001 |
| 2-16 |
Modification Fixed issue: 'When the user hang up the emergency call, the call is re-connected immediately, but the Caller ID disappears. In case of the phone receives 183 without PAI when the call is established. |
5.001 |
| 2-17 |
Modification Fixed issue: As Bluetooth headset is registered to HDV330/430. After operation of hold retrieve while using speaker phone, the voice path is changed to Bluetooth. |
5.001 |
| 2-18 |
Modification Fixed issue: [Precondition] CANCEL_OPERATION_MODE="1" There is a case, CANCEL key is ignored while outgoing call. |
5.001 |
| 2-19 |
Modification Fixed issue: The phone change the destination of "SIP REGISTER" after DNS look up. (REGISTER messages does not bind with the currently registered server) |
5.001 |
| 2-20 |
Modification Fixed issue: There is a case, call session remains with idle status when on hook operation is done during hold retrieving. |
5.001 |
| 2-21 |
Modification Fixed issue: 1. Receive more than two incoming call while talking 2. Push HOLD then ON HOOK 3. Push HOLD while ringing After this operation, the user can't retrieve hold call. |
5.001 |
| 2-22 |
Modification Fixed issue: There is a case, it remains call park icon on the status bar even park is retrieved. |
5.001 |
| 2-23 |
Modification Fixed issue: There is a case, it doesn't work Auto Answer function correctly when receiving more than two incoming calls at the same time. |
5.001 |
| 2-24 |
Modification Fixed issue: There is a case, it doesn't work SIP PnP. |
5.001 |