Firmware Name:	KX-TGP600 B
Existing version:	1.049
New version:	1.129

1. New or Enhanced Features

No.	Items	Fix version
1-1	Improvement The phone number of each registered SIP Line can now be verified in the handset menu [MENU} -> [System Settings] -> [Status] -> [Line Status] -> select line	1.094
1-2	Improvement Sampling rate of G.722 is changed from 16 kHz to 8 kHz according to RFC.	1.049
1-3	Improvement Currently Call Forward and DND is not deletable from the Function menu. They are changed to deletable from the Function menu. (Base unit/Handset)	1.049
1-4	Improvement Prepare the option to prevent web setting.	1.094
1-5	Improvement of the specification of pre-provisioning. The change of the implication regarding Option 66 and 67 of DHCP.	1.049
1-6	Improvement of supporting RFC3264. The device becomes to be held a call from other SIP phone supporting RFC3264.	1.049
1-7	Improvement Just after Failover destination is determined, the device sends SUBSCRIBE to Failover destination.	1.094
1-8	Improvement Support blank search in XSI Phonebook.	1.094
1-9	Improvement Enhance HDV130 XML Application. New parameter : - XMLAPP_START_URL - XMLAPP_INITIAL_URL - XMLAPP_INCOMING_URL - XMLAPP_TALKING_URL - XMLAPP_MAKECALL_URL - XMLAPP_CALLLOG_URL - XMLAPP_IDLING_URL - XML_INITIATE_KEY_SOFT1 - XML_INITIATE_KEY_SOFT2 - XML_INITIATE_KEY_SOFT3 - XMLAPP_FFKEY_ENABLE (HDV230 already have.)	N/A
1-10	Improvement Specify physical FF key (DSS key) order. Bottom left is No.1 (Normal) or Upper Left is No.1 (Reverse). New parameter : - BUTTON_LOCATION_SETTING	N/A
1-11	Improvement Enable / Disable Key tone by configuration file. New parameter : - KEY_PAD_TONE_HSy (for TGP600) - KEY_PAD_TONE (for HDV series)	1.094
1-12	Improvement Enhance supported number of Call-ID digits. (Up to 128 digits)	1.094
1-13	Improvement Improved the duration from pressing "call" button / hooking off to outgoing call.	N/A
1-14	Improvement Enhance HDV130 FF key (Add Forward feature) Modified parameter : - FLEX_BUTTON_FACILITY_ACTx	N/A
1-15	Improvement MoH(RTP 1) and Hold tone (RTP 2) are not mixed even when server send 2 different RTP to the phone.	1.094
1-16	Improvement Support DNS-SRV Lookup for XMPP (UC-One). New parameter : - UC_DNSSRV_ENA - UC_TCP_SRV_PREFIX	1.094
1-17	Modification Fixed issue: Regarding SIP-PUBLISH. - SIP PUBLISH is not sent when SSAF setting is enabled (SIP_DETECT_SSAF_n="Y"). - Improvement of the header format of SIP PUBLISH. - Calculation method of MOS-CQ value which is contained in the VQReport of SIP-PUBLISH has error. So the calculated value is always too low as compared to actual voice quality.	1.094
1-18	Improvement MOS-CQ value of SIP PUBLISH which is sent after a disconnected call is calculated from the MOS-CQ value of the last RTCP of a conversation. It is improved to calculate the SIP PUBLISH MOS-CQ value by the average of all RTCP from the entire conversation.	1.094
1-19	Improvement Through provisioning, a time range can be defined using a new configuration parameter to randomly access the server to get firmware updates. New parameter: - FWDL_RANDOM_DURATION Related Parameter: - FIRM_UPGRADE_ENABLE - FIRM_FILE_PATH - FIRM_VERSION	1.094
1-20	Improvement Handset registration improvement. Registering a new handset to the base station fails intermittently in crowded DECT environments.	1.094
1-21	Improvement Through provisioning, a time range can be defined using a new configuration parameter to randomly access the server to get configuration file updates. New Parameter: - CFG_RESYNC_DURATION Related Parameter: - CFG_STANDARD_FILE_PATH - CFG_PRODUCT_FILE_PATH - CFG_MASTER_FILE_PATH - CFG_CYCLIC - CFG_CYCLIC_INTVL - CFG_RESYNC_TIME - CFG_RESYNC_FROM_SIP - CFG_RESYNC_ACTION	1.094
1-22	Improvement The phone number of each registered SIP Line can now be verified in the handset menu [MENU] -> [System Settings] -> [Status] -> [Line Status] -> select line	1.094
1-23	Improvement Call can't be transferred to Conference server when user part of CONFERENCE_SERVER_URI is longer than 63 characters.	1.094
1-24	Improvement to hide the anonymous menu.	1.094
1-25	Improvement Prepare the option to prevent web setting.	1.094
1-26	Improvement - The device remember the last status of Headset usage. E.g. When Headset is used in the last call, "Redial" by pressing physical button from on-Hook state is attempted not through SP phone but through Headset.	N/A
1-27	Improvement Specify LDAP phonebook display format. New parameter : LDAP_DISPLAY_FORMAT	1.129
1-28	Improvement AMR-WB description in SDP is modified.	1.129
1-29	Improvement The phone can receive MCP(Polycom formula) more than once.	1.129
1-30	Improvement Add Display Name for LocalID and OrigID for incoming call in VQ Monitor Tool.	1.129
1-31	Improvement Display the version of Panasonic SIP software on WEB. The version is managed in common over the models (HDV series and TGP600).	1.129
1-32	Improvement Update client-certificate and private-key SHA1 to SHA2.	1.129
1-33	Improvement Enhance XML functions - Increase entrypoints for XML - Add new XML-element (MissedCallOff, CancelKey) New parameters : - XML_SOFT_KEY_NAMEx - XMLAPP_URL_SOFT_KEY - XMLAPP_URL_FLEX_BUTTONx Related parameters : - XMLAPP_INITIAL_URL - XML_INITIATE_KEY_SOFT1 (HDV130/230) - XML_INITIATE_KEY_SOFT2 (HDV130/230) - XML_INITIATE_KEY_SOFT3 (HDV130/230) - FLEX_BUTTON_FACILITY_ACTx - DSS_BUTTON_FACILITY_ACTx (HDV230/330)	N/A
1-34	Improvement Change maximum number of BLF 48 to 100, then LED status indication is available up to 100. Related parameters : - DSS_BUTTON_FACILITY_ACTx * "X_PANASONIC_IPTEL_BLF" assignment is available up to 100.	N/A
1-35	Improvement Add restart menu on terminal.	N/A
1-36	Improvement When a phone checks voice mail, it can send SUBSCRIBE message including mailbox name. New parameter: VM_SUBSCRIBE_SPECIFIC_n	1.129
1-37	Improvement A phone doesn't care case-sensitive search of XSI phonebook.	1.129
1-38	Improvement Certificate overview is displayable via TR-069 management using Vendor Specific parameter.	1.129
1-39	Improvement A user can change "Edit" character string display in 1st line of XML Testbox.	N/A
1-40	Improvement A phone can display other party's CLIP information on phone screen when a user makes an outgoing call with XML Trigger function.	N/A
1-41	Improvement After a user refers call list in XML application, missed call is deleted in call list.	N/A
1-42	Improvement A user can specify an individual URL for XLM start by soft key. Besides, a user can change soft key label.	N/A
1-43	Improvement Add some configuration parameters to separate the update timing of the XSI phonebook data from provisioning. New parameter: XSI_PHONEBOOK_CYCLIC_INTVL XSI_PHONEBOOK_RESYNC_DURATION	1.129
1-44	Improvement LED status of the ACD key now synchronizes its status in accordance with every message sent by the server correctly.	N/A
1-45	Improvement [HOLD/MESSAGE] key can now be used to call voice mail / check messages after going offhook.	1.129
1-46	Improvement 'When TGP600/HDV begins N-way conference call, the hold music plays for the held outside caller for the entire hold duration New config parameter: CONF_SERVER_HOLD_ENABLE="Y" ( default value is "N". )	1.129
1-47	Improvement Remote deregistration using new config parameter. New config parameter: NEXT_REGISTERED_HS_NUMBER	1.129
1-48	Improvement Display both phone number and name even the length overs 16 characters.	1.129
1-49	Improvement Changed the rule to display Caller ID which is prioritized to display network information or phonebook information.	1.129
1-50	Improvement Changed the rule to display Caller ID which is prioritized to display network information or phonebook information.	1.129
1-51	Improvement TIMEZONE can be set with handset menu.	1.129
1-52	Improvement It can be confirmed when updating FW success by log message.	N/A
1-53	Improvement Enhance the XML function. - Softkey name can be changed by provisioning - Add activating XML function to the program key	N/A
1-54	Improvement Add some functions to the program key - Presence - Application(to activate XML function) New parameter: XMLAPP_URL_FLEX_BUTTONx	N/A
1-55	Improvement BLF number is not displayed when dialing. 'New parameter: BLF_DISPLAY_OFF_OUTGOING	N/A
1-56	Improvement 1. Device doesn't reboot when resetting line with TR-069. 2. Line status of TR-069 is supported.	1.129

2. Fixed Issues

No.	Items	Fix version
2-1	Modification Fixed issue: Following BLF bugs are fixed. - BLF does not work because of the parse error of XML. - BLF may not work correctly, when the device has some calls.	N/A
2-2	Modification Fixed issue: In ECO mode state, the device is not initialized even if the FactoryReset from the menu.	1.049
2-3	Improvement Currently Call Forward and DND is not deletable from the Function menu. They are changed to deletable from the Function menu. (Base unit/Handset)	1.049
2-4	Modification Fixed issue: Correspondence of sip failover.	1.049
2-5	Modification Fixed issue: Device can not BLF call to the destination which includes alphabet.	N/A
2-6	Modification Fixed issue: Upon receipt of the ResourceList by re-subscribe, BLF lamp disappears.	N/A
2-7	Modification Fixed issue: uaCSTA (Mondago / ESTOS) bugs are fixed.	1.094
2-8	Modification Fixed issue: - Ignore SIP NOTFY by internal timeout in certain timing.	N/A
2-9	Modification Fixed issue: - One-way call is happened in specific server when answering the call. (MULTI_NUMBER_ENABLE="Y")	1.094
2-10	Modification Fixed issue: - Start call duration count from receiving 183 early media.	1.094
2-11	Modification Fixed issue: Countermeasure of following DTMF issue. When a TGP600 handset sends DTMF in hands free mode, the handset's mic pics up the tones and transmits them. The receiving party hears each inbound DTMF twice.	1.094
2-12	Modification Fixed issue: Countermeasure of following DTMF issue. During 3-way conference which is established by TPA60/65, DTMF from the handset will send to one conference party only and not the other.	1.094
2-13	Modification Fixed SIP TLS issue. After establishing a call by using SIP TLS, place the call on hold and then resume it, - Operation side (TPA60/65) : Noise burst is heard. - Other side (intended party) : Just silent.	1.094
2-14	Modification Fixed issue: The device continues to send DNS query, when the DNS server lapses into unusual condition.	1.094
2-15	Modification Fixed issue: The hold tone generated inside of the device is mixed with the received announcement, when it is connected to the announcement server of Genband.	1.094
2-16	Modification Fixed issue: Send no voice RTP in specific server.	1.094
2-17	Modification Fixed issue: - The configuration macros do not work when it described in the "FIRM_FILE_PATH".	N/A
2-18	Modification Fixed issue: - When the phone receives Re-INVITE before sending 200 OK as a reply for the initial INVITE, the phone sends Request Pending and call is disconnected.	1.094
2-19	Modification Fixed issue: - HDV230 will reboot, when the choosing "MENU -> Line Status" before the SIP REGISTER is success.	N/A
2-20	Modification Fixed issue: - White noise after SP phone is OFF.	N/A
2-21	Modification Fixed issue: - The device freezes when you configure SIP-TLS and other specific settings at the same time.	N/A
2-22	Modification Fixed issue: - The device reboots itself when you register 15 or more BLF in specific server (Not applied Broadsoft.)	N/A
2-23	Modification Fixed issue: Click-To Retrieve Bugs are fixed.	N/A
2-24	Modification Fixed issue: Setting change of the port number of Line 1 does not affect immediately under the SIP Trunk condition.	1.094
2-25	Modification Fixed issue: The phone could not resume the paired SCA phone's hold call when it is connected to MetaSwitch.	1.049
2-26	Modification XML method to send text is HTTP GET in all models. Fixed issue: XML method to send text is different between models. HDV130/330 is HTTP POST and HDV230 is HTTP GET.	N/A
2-27	Modification Fixed issue: Czech letters can't be displayed in XSI Phonebook.	1.049
2-28	Modification Fixed issue: In IPV4/IPV6 dual settings, AAAA look up doesn't work when IPV4 address is assigned to the phone before IPV6 is assigned.	N/A
2-29	Modification Fixed issue: The phone can't download configuration file from option66, when fail download from option160.	1.129
2-30	Modification Fixed issue: The phone can't receive configuration file from option66 in while pre-provisioning , when there is conflict with DHCP request timing.	1.129
2-31	Modification Fixed issue: Unnecessary characters are displayed in the line name during the operation of the voice message confirmation screen.	1.129
2-32	Modification Fixed issue: When REFER transfer is operated, the phone doesn't display the updated information from INVITE including Replaces header.	1.094
2-33	Modification CSTA bugs are fixed. Fixed issue: - Can't answer incoming call from over 10 digits telephone number. - Call information (Caller / Called) becomes reversed when the call is established.	1.129
2-34	Modification Fixed issue: There are cases where HTTPS provisioning (Client Certificate) fails when the provisioning server is MS IIS.	1.129
2-35	Modification Fixed issue: There is a case that the phone does not restart when the restart target parameters has changed in the config download.	1.129
2-36	Modification Fixed issue: There are cases where SIP process is deadlocked by sending SIP message and receiving the hole punching packet at the same time.	1.129
2-37	Modification Fixed issue: A phone can't answer an incoming call which has phone number over 10 digits on uaCSTA.	1.129
2-38	Modification Fixed issue: A phone exchanges information about calling party and called party on uaCSTA after answering an incoming call.	1.129
2-39	Modification Fixed issue: A user can't input PAUSE when configuring HOT key number even on PAUSE_INPUT_ENABLE="Y".	1.129
2-40	Modification Fixed issue: A call is disconnected when an other line is selected while having a conversation even on AUTO_CALL_HOLD="Y".	1.129
2-41	Modification Fixed issue: A phone can't communicate with a cell phone even when AMR-WB is configured.	1.129
2-42	Modification Fixed issue of TR-069: Uptime is incorrect.	1.129
2-43	Modification Fixed issue: Ring back tone rings against RINGBACK_TONE_TIMING configuration.	1.129
2-44	Modification Fixed issue: Ability to program "INT" under softkey. User presses "INT" on standby screen then selects HS number to call.	1.129
2-45	Modification Fixed issue: Ability to check the Base Unit IP Address using UDT Handset.	1.129
2-46	Modification Fixed issue: FW update via WebUI will be restricted when Firmware URL is defined and error will be displayed.	1.129
2-47	Modification Fixed issue: There are cases that the terminal does not send invite when it receives refer.	1.049
2-48	Modification Fixed issue: There are cases where HTTPS provisioning fails when the terminal starts up after factory reset operation.	1.049
2-49	Modification Fixed issue: Dial plan bug fixed.	1.129
2-50	Modification Fixed issue: When importing a config file via WebUI that has any parameter mistake, an error will be displayed.	1.129
2-51	Modification Fixed issue: Ability to factory reset TPA65 / 60 when not connected to Base.	1.129
2-52	Modification Fixed issue: Parallel Mode Hold Pickup Issue Held call is disconnected when it pickup the call from TPA65.	1.129
2-53	Modification Fixed issue: BLF doesn't work after a phone in factory reset imports configuration file from provisioning server.	N/A
2-54	Modification Fixed issue: A phone continue to seize line even after a call is terminated. New parameter: SHARED_STOP_LINE_SEIZE	1.129
2-55	Modification Fixed issue: 1) Once update firmware to default firmware by accessing to Redirection server, below configuration parameters are specified automatically. - CFG_STANDARD_FILE_PATH="https://provisioning.e-connecting.net/redirect/conf/{mac}.cfg" - FIRM_FILE_PATH="http://fw-provi.e-connecting.net/firm/000/HDVx30-yy.zzz.fw" - FIRM_VERSION="HDVx30-yy.zzz" note) yy.zzz is firmware version of default firmware on Redirection server 2) After restart or Power cycle, access to Redirection server. 3) Compare current firmware version with default firmware version. 4) If default firmware version is higher , the phone update firmware.	1.129
2-56	Modification Fixed issue: Some of Cyrillic alphabet is mistake.	N/A
2-57	Modification Fixed issue: Some words of Russian menu are mistranslation.	1.129
2-58	Modification Fixed issue: There are cases that the transfer function doesn't work when the terminal receives invite including replace.	1.129
2-59	Modification Fixed issue: The one way audio occurs when the terminal receives invite including replace.	1.129
2-60	Modification Fixed issue: There are cases registration-loss occurs.	1.129
2-61	Modification Fixed issue: Handset reboot issue due to NPDI information makes the PAI information longer than 32 characters. Handset now ignores over 32 characters to avoid reboot. (Base Firmware)	1.129
2-62	Modification Fixed issue: The call can't be released with the sequence below. 1. Sending "session timer reInvite" 2. Receiving "Bye" 3. Receiving "200OK of ReInvite"	1.129
2-63	Modification Fixed issue of TR-069: 1. Config file download is failed (Error 9015). 2. Periodic Inform isn't executed when PERIODIC INTERVAL is set more than 24 hours.	1.129
2-64	Modification Fixed issue: When importing a config file via WebUI that has any parameter mistake, an error will be displayed.	1.129
2-65	Modification Fixed issue of TR-069: Parameters associated with SIP don't work properly.	1.129
2-66	Modification Fixed issue: In case of TGP600 use TCP and no massage during 120[s], failed INVITE messages (failed with 408 responses back from the SBC) after 120[s] . ->[Modification]the keep-alive time will be changed in the Panasonic phone dynamically based on the SBC expire time received in the 200 OK register.	1.129
2-67	Modification Fixed issue: Cancel key is not available when a user is transferring a call.	1.129
2-68	Modification Fixed issue: Remote ID information of the first call for SIP Publish is changed to remote ID information of the second call when completing ghee transfer of originating call.	1.129
2-69	Modification Fixed issue: Outgoing call log can't be open while hearing second dial tone when holding blind transfer.	N/A

3. Known Issues

No.	Items	Fix version
3-1	None

date: 4-Sep-2015

Firmware Name:	KX-TGP600
Existing version:	V01.027
New version:	V01.049

Notes

	No.	Fixed issue
	1	When using SIP PNP for provisioning, SIP PNP does not work correctly.
	2	Currently PCMU Codec is not deletable. It is changed to deletable.
	3	Currently Call Forward and DND is not deletable from the Function menu. They are changed to deletable from the Function menu. (Base unit/Handset)
	4	Currently exported config file is encrypted for security purpose. It is changed to selectable encrypted format or plane text format with config parameter.
	5	Click to Call does not work when the Terminal receives the INVITE without SDP with supported 100rel (m: Option : k:100rel) (200 OK response is changed from "with SDP" to "without SDP")
	6	Currently the Caller Name, contained inside "from" header is not displayed. The config parameter for slecting "from" header or "PAI" header is newly added.
	7	Currently Call ID Blocking is not deletable from the Function menu. It is changed to deletable from the Function menu. (Base unit/Handset)
	8	Handset is changed to "no ringing" when it receives Alert-Info:<http://127.0.0.1/silent>.
	9	Currently when config url is termnated with "/", fixed file name is not added. The fixed file name ""{MODEL}.cfg" is automatically added at the end of the URL when config url is termnated with "/".
	10	The device adds VLAN tag even if the tagged is off on lldp mode.
	11	Sampling rate of G.722 is changed from 16 kHz to 8 kHz according to RFC.
	12	TGP600 stops to send RTP packets with repeating hold operation and hold release operation.
	13	After repeating on-hook and off-hook quickly by SP-phone in the shared call, it may rarely sounds ReorderTone.
	14	It would repeat the Firmware download via file server.
	15	Improve the SIP register stop after received the bubble UDP packet.

Irregular points
  -

date: 12-Jun-2015

Firmware Name:	KX-TGP600
Existing version:	V01.008
New version:	V01.027

Notes

	No.	Fixed issue
☆	1	The INVITE message contains incorrect FROM Header, when PHONE_NUMBER_n and SIP_URI_n (e.g. 41319180076@xxxxxxxx.yy) are set. The FROM Header contains domain name doubly as follows. - issue From: <sip:+41319180076@xxxxxxxx.yy@xxxxxxxx.yy;user=phone>;tag=53169100 - after the countermeasure From: <sip:+41319180076@xxxxxxxx.yy;user=phone>;tag=53169100
☆	2	Infrequently FWD/DND does not cooperate with the settings of WEB of Broadsoft.
☆	3	The device does not display the name of intended party, when it is received incoming a call that contains valid PAI information.
	4	XSI Remote Office and XSI Any Where do not work, in case of using HTTPS.
	5	Searching of XML phonebook does not work.
	6	It takes about 3 seconds to update status of WEB.
☆	7	Infrequently the device does not start sending RTP packets when it is received 183 message instead of 180.
	8	Regarding the function of uaCSTA, the consultation transfer does not work correctly.
	9	Improvement of the voicemail function. Permit SIP URI as voicemail number (VM_NUMBER_n).
	10	Improvement of valid digits of Display Name. Even if it is set 32 digits of display name via WEB of Broadest, the device becomes to display within 24 digits as its Display Name (DISPLAY_NAME_n).
	11	Improvement of the specification of pre-provisioning. The change of the implication regarding Option 66 and 67 of DHCP.
	12	Improvement of supporting RFC3264. The device becomes to be held a call from other SIP phone supporting RFC3264.

Irregular points
  -None