| Firmware Name: | KX-TGP600 B |
|---|---|
| Existing version: | 1.129 |
| New version: | 5.000 |
| No. | Fixed issue | Fix version |
|---|---|---|
| 1-1 |
Improvement Sending SIP-PUBLISH after each SSRC change during a conversation. Related config parameter: Following settings are needed. VQREPORT_SEND="1" |
2.104 |
| 1-2 |
Improvement Sending SIP-PUBLISH after each codec change during a conversation. New config parameter: VQREPORT_SEND_OPT_CODEC_ENABLE Related config parameter: Following settings are needed. VQREPORT_SEND="1" |
2.104 |
| 1-3 |
Improvement Sending SIP-PUBLISH after each network condition change during a conversation. New config parameter: VQREPORT_SEND_OPT_NW_CHANGE Related config parameters: ALERT_REPORT_TRIGGER ALERT_REPORT_MOSQ_CRITICAL ALERT_REPORT_MOSQ_WARNING Following settings are needed. VQREPORT_SEND="1" |
2.104 |
| 1-4 |
Improvement Improved DTMF impact to MOS score. |
2.104 |
| 1-5 |
Improvement Shortening the setting time of TR069 SPV |
2.104 |
| 1-6 |
Improvement Add "Delete handset" function to the web setting. |
2.104 |
| 1-7 |
Improvement for Dial Plan - dial plan apply for Manual Dial from key pad (post dial, predial) - dial plan does NOT apply for Memory Dial (phonebook, call log, One-touch key dial, Hot key dial) New config parameter: DIALPLAN_MEMORY_DIAL_ENABLE |
2.104 |
| 1-8 |
Improvement to hide the Call Settings from menu. New config parameter: CALL_SETTINGS_MENU_ENABLE |
2.104 |
| 1-9 |
Improvement Increase the number of configuration parameters that can be export from the Web setting. |
2.104 |
| 1-10 |
Improvement Support the Microsoft Windows10/Edge browser. |
2.104 |
| 1-11 |
Improvement select how to regist the numbers of Outgoing call, which is replaced by Dial plan or inputted. New config parameter: DIALPLAN_REPLACE_LOG_ENABLE |
2.104 |
| 1-12 |
Improvement : Assign TCP port number randamly in SIP-TLS. |
2.104 |
| 1-13 |
Improvement : Antenna pictograph and Battery pictograph of TPA60, UDT121 and UDT 131 are changed as follows. Antenna pictograph: It eliminates red frame when the signal strength is very weak. Battery pictograph: It eliminates red frame when the battery level is very low. |
2.104 |
| 1-14 |
Imporvement Strengthening of encryption strength 1)Digital signature: SHA384 2)RSA encryption key length: 4096 bits |
2.104 |
| 1-15 |
Improvement : Support CDP(Cisco Discovery Protocol) New config parameter: CDP_ENABLE CDP_INTERVAL |
2.104 |
| 1-16 |
Improvement : Group call pickup allows users to pick up incoming calls within their own group. |
2.104 |
| 1-17 |
Improvement : Group call pickup allows users to pick up incoming calls within their own group. |
2.104 |
| 1-18 |
Improvement Personal XML phonebook each cordless handset by sending IPEI on phonebook search. New configuration parameter: XMLAPP_SELECT_HS_PB |
2.104 |
| 1-19 |
Improvement Support Hotel phone specification New configuration parameter: DISCLOSE_FUNCTION_ENABLE VM_FUNCTION_ENABLE SOFT_KEY_QUICK_DIALx SOFT_KEY_LABELx |
2.104 |
| 1-20 |
Improvement Cease to restart main unit every time uaCSTA becomes enable on wireless handset. Related configuration parameter: UACSTA_ENABLE_n |
2.104 |
| 1-21 |
Improvement SIP-TLS is once disconnected when some parameters are changed. |
2.104 |
| 1-22 |
Improvement Setting of 'Range Alarm' can be changed with configuration parameter. New configuration parameter: RANGE_ALARM_ENABLE |
2.104 |
| 1-23 |
Improvement Features to call forward or conference call hard to find and menu is not clear like TGP500 |
2.104 |
| 1-24 |
Improvement Located Embedded Web menu under SYSTEM SETTING because it's hard for a user to find it. Assignment under HANDSET SETTING remains. |
2.104 |
| 1-25 |
Improvement In dial plan input, allowed NULL replacement format, such as "<#:>". |
2.104 |
| 1-26 |
Improvement Changed translation of March in German from 'Mrz' to 'M�rz'. |
2.104 |
| 1-27 |
Improvement When a phone receives a call while a user is calling to the other party, the user needs to press CANCEL key twice to cancel the calling call. Improved the times of pressing CANCEL key to once. New configuration parameter: CANCEL_OPERATON_MODE |
2.104 |
| 1-28 |
Improvement Application log in TGP/HDV can be sent to SYSLOG server. (When wireless handset can't be registered in TGP600, the result can be logged.) New configuration parameter: SYSLOG_OUT_START |
2.104 |
| 1-29 |
Improvement Support Safari web browser. |
2.104 |
| 1-30 |
Improvement Operational value can be sent to SYSLOG server by pushing special code from handset. New configuration parameter: SYSLOG_OUT_START |
2.104 |
| 1-31 |
Improvement Supported Packet Sniffer function |
2.104 |
| 1-32 |
Improvement Supported Remote Interface of Wireshark New configuration parameter: PCAP_ENABLE PCAP_REMOTE_ID PCAP_REMOTE_PASS PCAP_REMOTE_PORT |
2.104 |
| 1-33 |
Improvement A user can confirm handset that administrator authentication is assigned on wireless handset. |
2.104 |
| 1-34 |
Improvement A user can confirm telephone number on line by easy operation, holding down 'Down' key. |
2.104 |
| 1-35 |
Improvement Off-hook monitor can be configurable to disable. New configuration parameter: OFF_HOOK_MONITOR_ENABLE |
2.104 |
| 1-36 |
Improvement Group Paging of BroadWorks. Ability to specify how to handle the 1st active call when phone has the call and receives INVITE with answer-after=0. New parameter: SIGNALING_AUTO_ANS_ENABLE_n |
2.104 |
| 1-37 |
Improvement Phonebook is downloaded with HTTP GET when device boots up. New configuration parameter: XML_PHONEBOOK_URL XML_PHONEBOOK_CYCLIC_INTVL |
2.104 |
| 1-38 |
Improvement Device starts ringing with delay of designated time when incoming call arrives. New configuration parameter: DELAY_RING_TIME_n |
2.104 |
| 1-39 |
Improvement The rest of participants can continue the call if organizer terminates 3 way conference. New configuration parameter: CONF_OWNER_OUT_ENABLE |
2.104 |
| 1-40 |
Improvement Support Private hold feature for Shared Line Appearance of Metaswitch. New configuration parameter: PRIVATE_HOLD_ENABLE |
2.104 |
| 1-41 |
Improvement Support "No touch provisioning" of Broadsoft |
2.104 |
| 1-42 |
Improvement Support "Flexible Seating" of Broadsoft New configuration parameter: UC_HOTELING_MODE UC_FLEXIBLESEATING_UNLOCKPIN |
2.104 |
| 1-43 |
Improvement Support character input timeout New configuration parameter: AUTO_INPUT_KEY_TIME |
2.104 |
| 1-44 |
Improvement Support Ring Splash |
2.104 |
| 1-45 |
Improvement Panasonic RootCA is embedded in device. |
2.104 |
| 1-46 |
Improvement We modified not to stop call following case. 1) Send Invite and receive 407. 2) Send Invite and receive 302 3) Send Invite and receive 407 |
2.104 |
| 1-47 |
Improvement The status of SRTP call is displayed on LCD. New configuration parameter: DISPLAY_SRTP_CALL_ENABLE |
2.211 |
| 1-48 |
Improvement Supporting HTTP PUT of logging data feature. (Putting logging data of device to specific server with HTTP protocol.) New configuration parameter: BOOTLOG_SERVER_URI |
3.002 |
| 1-49 |
Improvement Adding feature of enabling/disabling displaying MWI information to LED/LCD. Related configuration parameter: NOTIFICATION_MENU_ENABLE <LCD> NOTIFY_MISSEDCALL_ENABLE (HDV130/230/330/430) NOTIFY_VOICEMAIL_ENABLE (HDV130/230/330/430) NOTIFY_NETWORKCAMERA_ENABLE (HDV430) NOTIFY_MISSEDCALL_ENABLE_HSy (TGP600) NOTIFY_VOICEMAIL_ENABLE_HSy (TGP600) <LED> NOTIFY_MISSEDCALL_LED_ENABLE (HDV130/230/330/430) NOTIFY_VOICEMAIL_LED_ENABLE (HDV130/230/330/430) NOTIFY_NETWORKCAMERA_LED_ENABLE (HDV430) NOTIFY_MISSEDCALL_LED_ENABLE_HSy (TGP600) NOTIFY_VOICEMAIL_LED_ENABLE_HSy (TGP600) |
3.002 |
| 1-50 |
Improvement Ringing Message Waiting Alert Tone when receiving second voice mail or later. (Previously version: Message Waiting Alert Tone rings only for first voice mail.) Related configuration parameter: NOTIFICATION_MENU_ENABLE New configuration parameter: <Tone> NOTIFY_VOICEMAIL_ALARM_ENABLE (HDV130/230/330/430) NOTIFY_NETWORKCAMERA_ALARM_ENABLE (HDV430) NOTIFY_VOICEMAIL_ALARM_ENABLE_HSy (TGP600) NOTIFICATION_ALARM_TYPE |
3.002 |
| 1-51 |
Improvement Displaying line class (Shared Line or not) of free line when using line status menu. [ Handset Firmware Version ] -TPA60: Ver.03.00.002 -TPA65: Ver.03.00.002 -UDT121: Ver.06.07.005 -UDT131: Ver.06.07.005 |
3.002 |
| 1-52 |
Improvement Making new configuration parameter for controlling default receiving volume of TPA60/TPA65/UDT121/UDT131. It is changeable by provisioning. New configuration parameter: HANDSET_VOLUME_LEVEL HEADSET_VOLUME_LEVEL SPEAKER_VOLUME_LEVEL |
3.002 |
| 1-53 |
Improvement Shortening the time of downloading FW from base station to handset with over the air. (Shortening of the time of Air Download) |
3.002 |
| 1-54 |
Improvement Shortening the time of displaying menu after selecting system settings in standby status. |
3.002 |
| 1-55 |
Improvement Shortening the time of displaying target handset after starting intercom search with handset. |
3.002 |
| 1-56 |
Improvement Shortening the time of outputting dial tone after pressing TALK key. |
3.002 |
| 1-57 |
Improvement Supporting Group paging of Metaswitch. |
3.002 |
| 1-58 |
Improvement Reduce of the procedure for displaying search result of phonebook by narrowing search result with inputting each 1 character. New configuration parameter: NW_PHONEBOOK_ADVANCED_SERACH |
3.002 |
| 1-59 |
Improvement Supporting crypto header for RTP/SRTP mode. (Previously for SRTP mode only) Modified configuration parameter: SRTP_CONNECT_MODE_n Change max value range 2 to 3. |
3.002 |
| 1-60 |
Improvement Enabling FW update of TGP600 when FW version of shipment from factory and FW version of pack soft are same. |
3.002 |
| 1-61 |
Improvement Showing function name as the title for input menu of soft key |
3.200 |
| 1-62 |
Improvement Supporting twamp. New configuration parameter: TWAMP_ENABLE TWAMP_CONTROL_PORT TWAMP_TEST_PORT TWAMP_SERVER_WAIT_TIME TWAMP_REFLECTOR_WAIT_TIME TWAMP_PADDING_ZERO |
3.200 |
| 1-63 |
Improvement Supporting CNG and VAD function New configuration parameter: CODEC_VAD_CNG_ENABLE NOISE_SUPPRESSOR_ENABLE (TGP600 only) [ SIP Version ] Ver.1.00 -> Ver.2.10 |
3.200 |
| 1-64 |
Improvement Separate synchronous feature of FWD and DND |
3.200 |
| 1-65 |
Improvement Additional Failsafe: Automatic reboot. New configuration parameter: ERROR_AUTO_REBOOT_TIME |
3.200 |
| 1-66 |
Improvement Additional Failsafe: Additional Logging: Output critical error logs without any configuration changing. |
3.200 |
| 1-67 |
Improvement Supporting configuration parameter to specify ringer volume level. New configuration parameter: RINGER_VOLUME_LEVEL |
3.200 |
| 1-68 |
Improvement Fixing ringer volume revel. - Reject user operation modifying ringer volume revel. - Does not display "Ringer Volume" and "Ring On Charger" in "Incoming Option" menu. - Reject user operation enabling Silent Mode. New configuration parameter: RINGER_VOL_OPERATION_ENABLE |
3.200 |
| 1-69 |
Improvement Supporting configuration parameter to specify function for soft key in talking condition. New configuration parameter: TALKING_SOFT_KEY_A TALKING_SOFT_KEY_B TALKING_SOFT_KEY_C |
3.200 |
| 1-70 |
Improvement Ability to embed MAC based client certificate. If it is embedded in the unit, it is used or https and ldaps. |
4.002 |
| 1-71 |
Improvement Supporting the server certification in Firmware as default for Orange |
4.002 |
| 1-72 |
Improvement Supporting configuration parameter to Enable or disable the resync duration when the phone reboot. New configuration parameter: CFG_BOOTUP_DURATION_ENABLE |
4.002 |
| 1-73 |
Improvement Supporting the phone can receive INVITE with P-Access-Network-Info (especial the INVITE from mobile phone). |
4.002 |
| 1-74 |
Improvement Ability to embed MAC based client certificate. If it is embedded in the unit, it is used for not only https and ldaps but also SIP-TLS. |
4.002 |
| 1-75 |
Improvement Change default value for DST, summer time, configuration parameter. Modified configuration parameter: DST_STOP_MONTH (default value: 10 -> 11) DST_STOP_ORDINAL_DAY (default value: 2 -> 1) |
5.000 |
| 1-76 |
Improvement Supporting to add refresher for outgoing INVITE to complete session timer negotiation. New configuration parameter: SIP_REFRESHER_n (default: 0) 0:Do not add the refresher parameter 1:Add the refresher parameter with the value "UAS" 2:Add the refresher parameter with the value "UAC" |
5.000 |
| 1-77 |
Improvement Remove prefix, "+", from received phone number when the phone receives international call. New configuration parameter: REMOVE_PREFIX_ENABLE (default: N) Related configuration parameter: COUNTRY_CALLING_CODE |
5.000 |
| 1-78 |
Improvement Enhanced failover improvement. Receiving 408 response from the server is applied as the trigger for failover. New configuration parameter: ENH_FOVR_408_ENABLE_n (default: N) |
5.000 |
| 1-79 |
Improvement When the device receives 403 as a response for INVITE, it sends REGISTER to the server immediately. New configuration parameter: INVITE_403_REGSEND_ENABLE_n (default: N) |
5.000 |
| 1-80 |
Improvement The phone accepts HTTP POST sent from specified IP address only. New configuration parameter: XMLAPP_RCV_IP_ADDRESSx (x=1-20) Related configuration parameter: XMLAPP_ENABLE XML_HTTPD_PORT |
5.000 |
| 1-81 |
Improvement Ability to embed Comodo root certificate. Related configuration parameter: HTTP_SSL_VERIFY |
5.000 |
| 1-82 |
Improvement Supporting RFC3986. For instance, "(" and ")" contained in SIP header are replaced by %28 and %29. New configuration parameter: ESCAPECODE_CONVERSION_RFC3986 (default: N) |
5.000 |
| 1-83 |
Improvement We changed the Not Open's configuration parameter to Open. Improvement Support fail over(Redundancy) Parameter Name: - ENH_FOVR_ENABLE_n - ENH_FOVR_RANDOM_TIMER_n - ENH_FOVR_RANDOM_MAX_TIME_n - ENH_FOVR_RANDOM_MIN_TIME_n Related Parameter: - SIP_FOVR_NORSP_n - SIP_FOVR_MODE_n - SIP_FOVR_DURATION_n - SIP_FOVR_MAX_n |
5.000 |
| 1-84 |
Improvement We changed the Not Open's configuration parameter to Open. Parameter Name: - BLOCK_CID_MENU_ENABLE - CNIP_CALL_PAI_ENABLE - DISPLAY_VM_WITH_NUMBER - FWD_DND_MISSEDLOG_ENABLE |
5.000 |
| 1-85 |
Improvement When using digest authentication, if authentication is FAIL, display "FAIL" on the LCD of Handset. |
5.000 |
| 1-86 |
Improvement Regarding presence feature, these improvements are implemented. 1) Start up Myphone status can be set by configuration parameter. 2) Other party status can monitor while invisible status New configuration parameter: PRESENCE_MYPHONE_STATUS PRESENCE_INVISIBLE_ENABLE |
5.000 |
| 1-87 |
Improvement TR069 Function. When TR069_POST_REQUIRED_BODY is set as Y, the device sends POST message with body data. This issue was found when motive verification. New configuration parameter: TR069_POST_REQUIRED_BODY |
5.000 |
| 1-88 |
Improvement Enhanced security of SRTP by lengthening encrypted key. |
5.000 |
| No. | Fixed issue | Fix version |
|---|---|---|
| 2-1 |
Modification Fixed issue: Delay of audio connection (2 seconds) when answering hunt group call. New config parameter: SIP_INC_INVITE_RTP_MODE_n |
2.104 |
| 2-2 |
Modification Fixed issue: Server announcement is cut off when user dials *XX for CF feature. |
2.104 |
| 2-3 |
Modification Fixed issue: There are cases, it lose registration at the constant period when SIP TLS setting is enabled. |
2.104 |
| 2-4 |
Modification Fixed issue: The device reboots before sending response for setting parameters with reboot process like parameter for VLAN. |
2.104 |
| 2-5 |
Modification Fixed issue: TR069 process doesn't start when setting ACS server address. |
2.104 |
| 2-6 |
Modification Fixed issue: There are cases, it lose registration automatically when fail over occurs. |
2.104 |
| 2-7 |
Modification Fixed issue: Call drops in five minutes when the call is started with CPAT. |
2.104 |
| 2-8 |
Modification Fixed issue: Browsers are automatically caching the login credentials irrespective of any "remember this password' settings. -> we added Logout button on WEB-GUI |
2.104 |
| 2-9 |
Modification Fixed issue: Server announcement is cut off when user dials *XX for CF feature. Additional modification for during 183 status. |
2.104 |
| 2-10 |
Modification Fixed issue: The handset becomes that it cannot accept any key pushing after pushing the [power/cancel] key during 183 status and having CW incoming call at the same time. |
2.104 |
| 2-11 |
Modification Fixed issue : TPA65 will reboot when trying to edit the softkey option. -The base unit firmware is not changed. -The TPA65 firmware is only changed. |
2.104 |
| 2-12 |
Modification Fixed issue: When a phone calls and receives '200 OK', call information in PAI header of '200 OK' is not displayed correctly. |
2.104 |
| 2-13 |
Modification Fixed issue: Because the base unit does not read PIN correctly, when changing PIN of Base unit, there is a case that can not register handset. |
2.104 |
| 2-14 |
Modification Fixed issue: When you attempt call hold you can hear noise with setting SRTP only. Related config parameter: SRTP_CONNECT_MODE_n (0:SRTP, 1:RTP/SRTP(default)) |
2.104 |
| 2-15 |
Modification Fixed issue: When setting HTTPS_PORT_ENABLE as Y, you can not access to the embedded Web. |
2.104 |
| 2-16 |
Modification Fixed issue: UDT121/131 reboots when trying to edit the Function key after assigning none. -The base unit firmware is not changed. -The UDT121/131 firmware is only changed. |
2.104 |
| 2-17 |
Modification Fixed issue: After on hook while line status showing and call waiting call receiving, sometimes the phone cannot disconnect the active call. (TPA65, HDV230 only) |
2.104 |
| 2-18 |
Modification Fixed issue: When displaying RootCA information in Web GUI, display area is too narrow to display all the information. |
2.104 |
| 2-19 |
Modification Fixed issue: In TPA60, TPA65, UDT1xx, SIP registering status is not displayed in "Line Status". (CE model only) |
2.104 |
| 2-20 |
Modification Fixed issue: When connecting handset to base unit that does not support CDP, handset reboots by the operation of displaying LineStatus. |
2.104 |
| 2-21 |
Modification Fixed issue: When the phone receives many incoming calls in a very short period, there is a case the phone reboots. |
2.104 |
| 2-22 |
Modification Fixed issue: When a phone receives a call, call information in PAI header' is displayed even though CNIP_FROM_ENABLE=�Y�. |
2.104 |
| 2-23 |
Modification Fixed issue: DTMF can be heard when configuration of DTMF_METHOD_n is RFC2833 or SIP INFO. New configuration parameter: DTMF_OUT_ENABLE |
2.104 |
| 2-24 |
Modification Fixed issue: Incoming call does not stop immediately even though the call is canceled in case of multi line setting. |
2.104 |
| 2-25 |
Modification Fixed issue: Modify to work correctly when the dial plan includes Macro timer and DIAL_PLAN_NOT_MATCH_ENABLE is set as Y. |
2.104 |
| 2-26 |
Modification Fixed issue: Line Status of TR-069 isn't displayed correctly New configuration parameter: TR069_REGISTERING TR069_REGISTERED |
2.104 |
| 2-27 |
Modification Fixed issue: Result of Traceroute and Ping of TR-069 isn't correct. |
2.104 |
| 2-28 |
Modification Fixed issue: The handset receiving Multicast Paging can not hand over to the repeater. |
2.104 |
| 2-29 |
Modification Fixed issue: TGP600 does not boot up by updating FW again during update with Web. |
2.104 |
| 2-30 |
Modification Fixed issue: There is a case that the some data are missing when the phone sends syslog to the server. |
2.104 |
| 2-31 |
Modification Fixed issue: In spite of setting FWD busy, the phone doesn't transfers the incoming call when the session is full. We modified that the phone transfers the incoming call while establishing call when setting FWD busy. |
2.104 |
| 2-32 |
Modification Fixed issue: When setting shared call as enable under Metaswitch environment, the phone fails to attempt outgoing call. |
2.104 |
| 2-33 |
Modification Fixed issue: When a phone receives a call, it doesn't send '180 RINGING'. |
2.104 |
| 2-34 |
Modification Fixed issue: When you catch a call to shared number on a phone, the other phones continue to ring. |
2.104 |
| 2-35 |
Modification Fixed issue: You can't hear any voice (No RTP) in call of shared number. |
2.104 |
| 2-36 |
Modification Fixed issue: BLF doesn't work correctly after provisioning though it works after rebooting. |
2.104 |
| 2-37 |
Modification Fixed issue: When you press "System Setting" menu, a phone freezes while displaying "Please Wait". |
2.104 |
| 2-38 |
Modification Fixed issue: When using XML phonebook, "?" isn't attached after phonebook URL. |
2.104 |
| 2-39 |
Modification Fixed issue: The operation of HDV300 becomes unstable. |
2.104 |
| 2-40 |
Modification Fixed issue: DND setting is not synchronous to server after failover. |
2.104 |
| 2-41 |
Modification Fixed issue: Transferred call is terminated with blind transfer of incoming call from non-SIP device. |
2.104 |
| 2-42 |
Modification Fixed issue: Call is terminated after about 25 sec from starting conversation. (Server terminates call because device only sends "100 Trying" to "reINVITE". ) |
2.104 |
| 2-43 |
Modification Fixed issue: Server authentication is failed when server uses SSL re-session. |
2.104 |
| 2-44 |
Modification Fixed issue: Device doesn't originate by dialing target dial set with repeat of dial plan. |
2.104 |
| 2-45 |
Modification Fixed issue: "Forward No Answer" doesn't act. |
2.104 |
| 2-46 |
Modification Fixed issue: Device can't terminate incoming call when picking up call waiting during call with the device doesn�t' have call hold capability. |
2.104 |
| 2-47 |
Modification Fixed issue: Device can't return to standby status by pressing "Cancel" Softkey when hearing busy tone with busy of transfer target. |
2.104 |
| 2-48 |
Modification Fixed issue: Incoming LED doesn't go off with flashing when answering against recall of hold call while talking to outside call. |
2.104 |
| 2-49 |
Modification Fixed issue: Opposite party executes call hold and call release after CallPickup. Then call is terminated with transfer side answers against call transferred automatically. |
2.104 |
| 2-50 |
Modification Fixed issue: REGSTER isn't send when SIP related parameters becomes available with SPV of TR-069. |
2.104 |
| 2-51 |
Modification Fixed issue: Call is terminated after 25sec from beginnings of call. |
2.104 |
| 2-52 |
Modification Fixed issue: CallWaiting doesn't arrive when executing on-hook after opening LineStatus screen during CallWaiting arrives. Also original call can't be terminated. |
2.104 |
| 2-53 |
Modification Fixed issue: Pop noise occurs when changing protocol from RTP to SRTP. |
2.104 |
| 2-54 |
Modification Fixed issue: Response is slow for BLF settings of MetaSwitch server. |
2.104 |
| 2-55 |
Modification Fixed issue: When user shows linestatus while receiving multiple incoming call, a phone become not to be able to answer remaining call after one caller CANCEL the call. |
2.104 |
| 2-56 |
Modification Fixed issue: To faster response when pick up a call with using wideband (temporarily "fixed" when using narrow band the delay acceptable now) |
2.104 |
| 2-57 |
Modification Fixed issue: MCP sending from the handset could not stop fairly infrequently. |
2.104 |
| 2-58 |
Modification Fixed issue: When user shows linestatus while receiving multiple incoming call, a phone become not to be able to answer remaining call after one caller CANCEL the call. |
2.104 |
| 2-59 |
Modification Fixed issue: The handset can only hear garbled noise, when the SRTP connect mode setting is specified as SRTP only. Related configuration parameter: SRTP_CONNECT_MODE_n (0:SRTP, 1:RTP/SRTP(default)) |
2.104 |
| 2-60 |
Modification Fixed issue: Spelling mistake of CANCEL_OPERATION_MODE parameter as CANCEL_OPERATON_MODE. New configuration parameter: CANCEL_OPERATION_MODE |
2.211 |
| 2-61 |
Modification Fixed issue: The device cannot send DTMF after receiving 183 while outgoing call. New configuration parameter: SIP_183_TALK_ENABLE |
2.211 |
| 2-62 |
Modification Fixed issue: The device cannot work correctly when CANCEL_OPERATON_MODE is set as 1. |
2.211 |
| 2-63 |
Modification Fixed issue: The caller's LCD does not show CID correctly, the end of the name B is visible. Operation and conditions are as following. Operation: B has CFNAnswer to C activated. A calls B. B rings and doesn't answer. C rings and answers after 5 seconds. Condition: The name of B is longer than the name of C. [ Handset Firmware Version ] -TPA60: Ver.02.04.007 -TPA65: Ver.02.04.009 -UDT121: Ver.06.06.009 -UDT131: Ver.06.06.009 |
2.211 |
| 2-64 |
Modification Fixed issue: The Safari browser does not show correctly. |
2.211 |
| 2-65 |
Modification Fixed issue: The device replies 488 when receiving INVITE whose SDP has 2 m line. |
2.211 |
| 2-66 |
Modification Fixed issue: The device replies 491 instead of 500 when receiving re-INVITE before receiving ACK. |
2.211 |
| 2-67 |
Modification Fixed issue: When using Bluetooth Headset, the voice path is connected to ear speaker after hold retrieve. [ Handset Firmware Version ] -TPA60: Not released -TPA65: Not released -UDT121: Ver.06.06.009 -UDT131: Ver.06.06.009 |
2.211 |
| 2-68 |
Modification Fixed issue: In case of privacy mode is set as disable, the handset fails resuming call from Line Status list which is held by other handset, when it hears dial tone. Related configuration parameter: PRIVACY_MODE_n (N:disable, Y:enable (default)) |
2.211 |
| 2-69 |
Modification Fixed issue: Remaining LED lighting of LINE key after hang up the call. |
3.002 |
| 2-70 |
Modification Fixed issue: Status of off hook and originating call isn't displayed when using line status menu in Shared Line. |
3.002 |
| 2-71 |
Modification Fixed issue: Miswriting of Parallel Mode Settings in Web GUI. |
3.002 |
| 2-72 |
Modification Fixed issue: The parameter of "m" in SDP of 200Ok is lost when receiving INVITE having m=video 0 RTP/AVP in SDP. |
3.002 |
| 2-73 |
Modification Fixed issue: When changing IP address assignment method from DHCP to Static with SPV (Set Parameter Value) of TR-069, IP address information isn�t set (IP address, Subnet, Default Gateway). |
3.002 |
| 2-74 |
Modification Fixed issue: TPA65 reboots when executing off hook soon after pressing soft key "CallLog". This issue occurs when using SP key also. [ Handset Firmware Version ] -TPA60: Ver.03.00.002 -TPA65: Ver.03.00.002 -UDT121: Ver.06.07.005 -UDT131: Ver.06.07.005 |
3.002 |
| 2-75 |
Modification Fixed issue: When receiving incoming call, silent status occurs by answering call. And reorder-tone rings by releasing hold call. |
3.002 |
| 2-76 |
Modification Fixed issue: Error occurs when sending SIP TLS data to Redwood server. |
3.002 |
| 2-77 |
Modification Fixed issue: Incorrect characters are displayed when receiving more than 16 Cyrillic characters as Displayinfo. |
3.002 |
| 2-78 |
Modification Fixed issue: IP address doesn't become 192.168.0.241/24 in maintenance mode. |
3.002 |
| 2-79 |
Modification Fixed issue: Recall doesn't occur when executing off hook and on hook while listening busy tone after call is transferred to busy destination. |
3.002 |
| 2-80 |
Modification Fixed issue: When call is being established between 2 devices, call is disconnected with receiving multicast paging. (HDV430 already supported) |
3.002 |
| 2-81 |
Modification Fixed issue: When device is held while talking with IPv6, inactive isn't set in SDP. (HDV430 already supported) |
3.002 |
| 2-82 |
Modification Fixed issue: When transferring video call to other line than line 1 of HDV430 with Polycom blind transfer, it becomes voice call in video call screen. (HDV430 already supported) |
3.002 |
| 2-83 |
Modification Fixed issue: Emergency call feature doesn't work properly. (FW version 01.122 or later) |
3.002 |
| 2-84 |
Modification Fixed issue: There is a case that ringtone doesn't ring when incoming call arrives with Shard Line. |
3.002 |
| 2-85 |
Modification Fixed issue: When receiving CNIP more than 128 characters, device returns 488 error. |
3.200 |
| 2-86 |
Modification Fixed issue: Displaying LineStatus is slow (for about 4sec needed). |
3.200 |
| 2-87 |
Modification Fixed issue: When loading language file whose version is not appropriate, device becomes unstable. |
3.200 |
| 2-88 |
Modification Fixed issue: FWD/DND feature for ENTEL doesn't work. |
3.200 |
| 2-89 |
Modification Fixed issue: CSTA message is incorrect in case of attendant transfer. |
4.002 |
| 2-90 |
Modification Fixed issue: There are cases, SIP server timeout occurs while sending INVITE to the device, when the device has LDAP setting and searching time of LDAP server is longer than SIP server's timer. |
4.002 |
| 2-91 |
Modification Fixed issue: The phone does not re-try when the phone receive 503 without Retry-After header from server. |
4.002 |
| 2-92 |
Modification Fixed issue: The configuration parameter; SIP_DNSSRV_ENA_NAPTR_n for NAPTR feature is not mapped in data-model of TR069. Related configuration parameter: SIP_DNSSRV_ENA_NAPTR_n |
4.002 |
| 2-93 |
Modification Fixed issue: When the phone receive a plural Multicast Paging, the phone needs more than 8 sec to playback the Multicast Paging. Or the phone can not receive a new Multicast Paging. |
4.002 |
| 2-94 |
Modification Fixed issue: For example, under emergency number is set "1234" and then make a call with "1" or "12" or "123", the phone does not outgoing call. |
4.002 |
| 2-95 |
Modification Fixed issue: Handset fails location registration in some specified condition. Its appearance keeps idle mode normally, but it can not receive incoming call. When the phone has this issue, it responds 404 for receiving INVITE. |
4.003 |
| 2-96 |
Modification Fixed issue: '"Missed Calls" displayed on LCD disappears once when the phone receives new voice message in following condition. -"Message" for "Missed Call" is set as ON. -"Message" for "Voice MSG" is set as OFF. |
5.000 |
| 2-97 |
Modification Fixed issue: TTL value contained in twamp packet is incorrect. |
5.000 |
| 2-98 |
Modification Fixed issue: When the user hang up the emergency call, the call is re-connected immediately, but the Caller ID disappears. In case of the phone receives 183 without PAI when the call is established. |
5.000 |
| 2-99 |
Modification Fixed issue: [Precondition] CANCEL_OPERATION_MODE="1" There are cases, CANCEL key is ignored while outgoing call. |
5.000 |
| 2-100 |
Modification Fixed issue: The device ignores UPDATE packet when its status is incoming. |
5.000 |
| 2-101 |
Modification Fixed issue: The device ignores INVITE message when Diversion header length is longer than 512byte. This case might occur, when the call comes to the 4th CC at the call center. |
5.000 |
| 2-102 |
Modification Fixed issue: TR069 Function. The CPE does not send 4 VALUE CHANGE for Device.Info.UpTime. This issue was found when motive verification. |
5.000 |
| 2-103 |
Modification Fixed issue: TR069 Function. Time zone setting is missed as UTC when getting CurrentLocalTime. 'This issue was found when motive verification. |
5.000 |
| 2-104 |
Modification Fixed issue: TR069 Function. Time zone setting is missed as UTC when sending CurrentTime by Inform. 'This issue was found when motive verification. |
5.000 |
| 2-105 |
Modification Fixed issue: The phone change the destination of "SIP REGISTER" after DNS look up. (REGISTER messages does not bind with the currently registered server) |
5.000 |
| 2-106 |
Modification Fixed issue: In SIP Trunk mode, TGP600 does not make or receives a call on Line 2,3,4,5,6,7 and 8. (on Line 1, works correctly) |
5.000 |
| 2-107 |
Modification Fixed issue: There is a case, call session remains with idle status when on hook operation is done during hold retrieving. |
5.000 |
| No. | Fixed issue | Fix version |
|---|---|---|
| 3-1 | None | - |
| No. | Fixed issue | Fix version |
|---|---|---|
| 4-1 |
[ SIP Version ] Ver.1.00 -> Ver.2.10 |
3.200 |
| 4-2 |
TGP600: Ver.01.129 -> Ver.05.000 [Handset firmware] TPA60: Ver.02.02.006 -> Ver.03.02.000 TPA65: Ver.02.02.005 -> Ver.03.02.000 UDT121: Ver.06.04.005 -> Ver.06.09.000 UDT131: Ver.06.04.005 -> Ver.06.09.000 |
5.000 |