close

Release Note
KX-UT113/123/133/136 Firmware

Version History

01.294

• Modification:
  1. When the device received the SIP-183_Session_Progress during the transfer, the call is disconnected.
  2. There is that the date of the call history is broken. ex.) 0/0/2016

• Improvement:
  1. Performance improvement that reINVITE can be receive at the same time of the call establishment..
  2. Performance improvement that call disconnection doesn't occur with answer to held call.
     RFC3264 compliant.
  3. Adding new function that SIP privacy header is displyed on BLF.

01.278

• Enhancements/Additions:
  
  1. Added the PnP provisioning using multi-cast SUBSCRIBE.

• Corrections/Improvements:
  
  1. Improved the phenomenon that the terminal sends 488 response to re-INVITE without SDP.
  2. Improved the phenomenon that the status of BLF becomes different from the actual call status.

01.251

• Enhancements/Additions:
  
  1. Display of DN button is controlled by Shared Call Appearance index.
     (DN button needs to be assigned shared line)
  2. Enabled ID/Password on HTTP digest authentication to enter by phone operation.
  3. Not recorded in Incoming call log when the reason of cancel is "Queue poll".
  4. Changed the default value of Parameter :"AUTO_CALL_HOLD" to "Yes" from "No".
  5. Enabled some WEB settings to change by configuration file.
     Parmaeter:"MAINTENANCE_WEB_RESET_ON_STARTUP" is added.
  6. Added the function to delete all call logs at one time.
  7. Caller ID information on LCD is updated when updating it by P-Asserted-Identity on SIP UPDATE method.
  8. "WorkingAfterCall" is not sent automatically when a conversation finished.

• Corrections/Improvements:
  
  1. Improved that "Synchronize Do Not Disturb and Call Forward" setting is disabled when phone number is changed at the same time.
  2. Made confirmation tone disable when HOLD_AND_CALL_ENABLE="N" and CONFIRM_TONE5_ENABLE="N".

01.221

• Additions:
  
  1. Supported the DTMF marker bit of RFC4733.
  2. Added the function to make idle state automatically when the party hangs up the phone.

• Corrections:
  
  1. Improved so that "HOLD" operation during the conference call makes idle state when HOLD_AND_CALL_ENABLE="N"
  2. Made the voice not muted during call-waiting tone.

01.167

• Additions:
  
  1. Added the following five languages.
     -Bosnian, Romanian, Slovene, Serbian, Turkish
  2. Enabled the transfer after holding operation.
  3. Reduced the load of access to the Provisioning server.
  4. Added ACD status (Available / Unavialable / Wrap up).
  5. Supported LLDP.
     Please refer to No.12-017 of technical contents about LLDP specification.
  6. Improved XML application.
  7. Added the fucntion to make idle status after holding a call.

• Corrections:
  
  1. Enabled "," (comma) to use in a string of Call Information.

01.133

• Additions:
  
  1. The phone number of BLF is automatically assigned by BroadSoft Server.
  2. Improved XML application.
     The phone displays the information from XML server when the call is incoming.
  3. Supported the following ringtone pattern of Bellcore in Alert-info header.
     Bellcore-r1,Bellcore-r2,Bellcore-r3,Bellcore-r4 and Bellcore-r5
  4. Enabled UT1xx in same group to receive the incoming call by same phone number.

• Corrections:
  
  1. Corrected the following issue.
     Even if only ringer tone data is changed on phonebook, it is not changed after importing.

01.081

• Additions:
  
  1. Supported the AnnexF and AnnexG for TR-069.
  2. Supported XML application programing interface(API).
     It is possible to develop various application, such as network phonebook, by using this API.
  3. Added the Missed Call Log menu in the Call Log menu.
  4. Added DTMF relay by using SIP-INFO method.
  5. DSCP value can be set separately for RTP and RTCP.
  6. The User can select whether Key Click tone is ring or not from the phone function menu.

• Corrections:
  
  1. The incoming call is not rejected from similar phone number with own number (e.g. from 101 to 1010)
  2. The receiving volume of SP-phone does not go down when the call waiting tone rings.
  3. Changed LCD display word. (Back Light -> Backlight)
  4. The headset mode status keeps by power OFF/ON of UT1xx.series

01.061

• Additions:
  
  1. Supported a incoming REFER in transfer call function.
  2. Supported Client certificate.
  3. Enabled to answer for the click to dial in the TALK status.
  
  UT113/123: The current call places to hold and answers the call of "the click to dial".
  UT133/136: The current call places to hold or be disconnected.
  4. Supported two kinds of Server certificate.
  5. Enabled to receive the packets of TCP protocol.
  6. Expanded the size of Server certificate used by HTTPS from 5 KByte to 20 KByte.

• Corrections:
  
  1. Reduced the comfort Noise of the SP-Phone sending and Off-Hook monitor by adjusting the parameter.
  2. Reduced the hissing noise of the Handset by adjusting the parameter.

01.025

• First Release Version

Privacy Preference Center

When you visit any website, it may store or retrieve information on your browser, mostly in the form of cookies. This information might be about you, your preferences or your device and is mostly used to make the site work as you expect it to. The information does not usually directly identify you, but it can give you a more personalized web experience. Because we respect your right to privacy, you can choose not to allow some types of cookies. Click on the different category headings to find out more and change our default settings. However, blocking some types of cookies may impact your experience of the site and the services we are able to offer.
More information

Allow All

Manage Consent Preferences

Essential cookies

Always Active

These cookies are essential to make our website work or to provide necessary functions relating to the services you request or to enable communications. They allow us to provide you with a seamless internet experience. We also use them for security purposes.

Cookie Details‎

Functional Cookies

Functional Cookies

These cookies enable the website to provide enhanced functionality and personalisation. They may be set by us or by third party providers whose services we have added to our pages. If you do not allow these cookies then some or all of these services may not function properly.

Cookie Details‎

Performance Cookies

Performance Cookies

These cookies analyze, how you use our website to improve the way our website works for you and for others visitors to our website. They enable us (and our third party service providers) to recognize and count the visitors and see how visitors move around our website when they are using it. We use them to understand which pages are popular with visitors. This helps us to improve how our website works by, for example, ensuring that you can easily find what you are looking for and to overall enhance visitors’ experience on our website.

Cookie Details‎

Advertising Cookies

Advertising Cookies

These cookies may be set through our site by our advertising partners. They may be used by those companies to build a profile of your interests and show you relevant adverts on other sites. They do not store directly personal information, but are based on uniquely identifying your browser and internet device. If you do not allow these cookies, you will experience less targeted advertising.

Cookie Details‎

Vendors List

Clear

checkbox label label

Apply Cancel

Consent Leg.Interest

checkbox label label

checkbox label label

checkbox label label

Reject All Confirm My Choices