Software
Logo Transfer Software for Windows
Introduction of the Application
This is a software application that lets you change the default Panasonic start up logo to any logo you want.
A new logo can be easily uploaded by connecting a computer to the projector through a LAN* or serial (RS-232C) connection by using this application.
* Depending on the model, this software may work only with a serial connection. For details, see the List of Compatible Device Models.
Compatible Projector Models
See the List of Compatible Device Models.
List of Compatible Device Models
* Restrictions vary depending on the model.
* Use Logo Transfer Software Version 2.1.5 when using a LAN connection with the following models: PT-LB90NT; PT-DZ6700 / DZ6710 / DW6300 / D6000 / D5000; PT-D12000 / DZ12000 / DW100; PT-LB1 / LB2 / LB3 / LB1V / LB2V / LB2X; PT-ST10; PT-DZ8700 / DS8500 / DW8300; PT-FX400 / FW430; PT-DX800 / DW730; PT-LZ370; PT-VX500 / VW430 / VX501; PT-VX505N / VW435N; PT-VW431D; PT-DZ680 / DW640 / DX610; PT-VX510 / VW440; PT-VX415NZ / VW345NZ; PT-VX410Z / VW340Z / VX42Z; PT-EZ580 / EW640 / EW540 / EX610 / EX510; PT-VZ570 / VZ575N / VW530 / VW535N / VX600 / VX605N / VX60 / VX50; PT-VX425N / VW355N / VW350 / VX420 / VX421; PT-VZ470; PT-GW301C.
Latest Version
Version 2.1.19.1
Click the button shown below to check version information.
Update information from Version 2.1.16.1
- PT-MZ882, MZ782, MZ682 added
* Update the software to the latest version before use.
System Requirements
| OS |
Windows 10 : ･ Compatible with the English, Japanese or Chinese language versions of the above operating systems. ･ Compatible with the versions up to Microsoft Windows 7 SP1. |
|---|---|
| CPU | At a minimum, the specifications must support operation of the above-described operating systems. |
| RAM | At a minimum, the specifications must support operation of the above-described operating systems. |
| Display | Display resolution shall be XGA or higher, and the number of colors on the screen must be more than 16 bits. |
| Wired LAN connector | RJ-45 |
| Serial Terminal | D-sub 9-pin |
NOTE:
Ensure the settings of your computer are configured to display the screen at 100 % size. Failure to do so may result in display abnormalities.
Operation is not guaranteed when used with system environments other than the above or on homemade computers.
Operation is not guaranteed for all computers that meet the above conditions.
Downloading and Installing the Software
How to Download and Install
- Click the Download button above and the "Software Licensing Agreement" window will appear. Select [Agree] and the installer will begin to download automatically.
- Once the installer has been downloaded, double click LogoTransferSoftwareSetup_v211901_EN.zip.
This will uncompress the installation files and create a folder named LogoTransferSoftwareSetup_v211901_EN. - Double click the setup icon
in the LogoTransferSoftwareSetup_v211901_EN folder.
Download Logo Transfer Software Version 2.1.5
- Click the Download button above and the "Software Licensing Agreement" window will appear. Select [Agree] and the installer will begin to download automatically.
- Once the installer has been downloaded, double click LogoTransferSoftwareSetup_v21503_EN.zip.
This will uncompress the installation files and create a folder named LogoTransferSoftwareSetup_v21503_EN. - Double click the setup icon in the LogoTransferSoftwareSetup_v21503_EN folder.
For specific installation instructions, refer to the following manual.
Operating Instructions of Logo Transfer Software
Compatible Device Models
List of Compatible Device Models
List of Compatible Device Models for Logo Transfer Software Version 2.1.5
