Wireless Manager ME 6.4 for Windows

NOTE:

• For a projector, the display resolution of projected images differs depending on the aspect ratio of the display device of the projector used.
- When 4:3: Images of 1024 x 768 dots are displayed with the number of display dots of the projector.
- When other than 4:3: Images of 1280 x 800 dots are displayed with the number of display dots of the projector.

• For a flat-panel display, images of 1280 x 800 dots are displayed with the number of display dots of the flat-panel display.

• Note that operation is not guaranteed when used with system environments other than the above or on homemade computers.

• It may not be possible to use some of the functions of a computer if it is using a wireless WAN (wireless wide area network) .

• When connecting with IEEE 802.11n standard, the wireless LAN adaptor, projector and access point used must all support the 11n standard.

• If the computer has a switchable graphics function is to be switched, remember to stop projection before switching the function.

Operation is not guaranteed for all computers that meet the above conditions.

1. Right click the Download button above and select Save to file to save the installer program to the folder of your choice.
   Once the installer has been downloaded, double click wmme64.zip.
   This will uncompress the installation files and create a folder named WMME6.4.
2. Double click the setup icon in the WMME6.4 folder.

For specific installation instructions, refer to the following manual.

Operating Instructions of Wireless Manager ME 6.4 for Windows

Download PDF

Right click the Download button above and select Save to file to save the installer program to the folder of your choice.
Once the installer has been downloaded, double click usb_driver.exe.
This will uncompress the installation files and create a folder named USB_Display_Driver.

Installing the USB driver (For the first time when you connect the USB cable)

1. 

   1. When the “Updated Driver Software” screen appears, click “Browse my computer for driver software”.

2. 

   2. Click [Browse] for “Search for driver software in this location”.
   On the “Browse For Folder” screen, select the "USB_Driver" folder that was generated after downloading, and click [OK].

3. 3. It is now time to return to the wizard screen, so click [Next].

4. 

   4. The <Windows security> screen is displayed so click “Install this driver software anyway”.

5. 

   5. When the “Windows has successfully updated your driver software" message appears, click [Close].

NOTE:
If you change the USB port on the PC, it is necessary to perform the above-described operating again.
When using Windows 8.1 software, the "Found New Hardware Wizard" may not start up automatically.
If this is the case, select "Device Manager" → "Other devices" → "RNDIS/Ethernet Gadget," and then install the USB display driver manually.

Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Intel and Intel Core i5 are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and/or other countries.

Other company names, product names, or other names noted on this page are trademarks or registered trademarks of the respective companies. Note that ® and ™ marks are not indicated on the text of this page.