Wireless
Software

Wireless Manager ME 6.4 for Windows without Installation

Introduction of the Application
(Basic Version)

This application supports wired or wireless connection of screen display images from a computer to a wireless-ready Panasonic projector. The following describes the procedures for using the application without installing it in a computer. By copying Wireless Manager ME 6.4 to a removable media device such as an SD card, the application can be used by connecting the removable media to a computer, without installing the application. If an older version of Wireless Manager is stored in the removable media, be sure to delete the entire folder containing the program from the media before copying the new version.

Compatible Projector Models

PT-MZ770/MZ670/MZ570/MW730/MW630/MW530
PT-VZ585N/VW545N/VX615N
PT-VZ575N/VW535N/VX605N
PT-VW355N/VX425N
PT-VW435N/VX505N (Discontinued models)
PT-VW345NZ/VX415NZ (Discontinued models)
PT-JX200/JW130

Note:
Application is possible to the following models, but restrictions vary depending on the model.
For details, see the List of compatible projector models.
PT-DZ570* / DW530* / DX500* / FW430* / FX400* / FW300NT / FW300** / F300NT / F300**/ VX400NT / LB90NT / LW80NT / LB80NT / LB75NT

* To operate wireless projection, the optional Wireless Module ET-WM200 is required.

** The PT-FW300 and PT-F300 support a wired LAN system only.

Latest Version

Version 6.4 (6.4.0 (19))

Click the button shown below to check version information.

How to confirm the version

Update information from Version 6.4 (6.4.0 (16))

Supports PT-MZ670

Application Guidance Video

How to access Wireless Manager on your computer.

NOTE: Wireless Manager ME 6.3 is used in this video as an example. Images used in this video may differ from those shown on your screen.

System Requirements

The computer must meet the following requirements in order to use the supplied software.

OS	Microsoft Windows 8.1 : Windows 8.1 Pro (32/64 bit) / Windows 8.1 (32/64 bit) Windows 10 : Windows 10 Pro (32/64 bit) / Windows 10 Home (32/64 bit) The Japanese, English and Chinese versions of the above operating systems are supported.
CPU	Intel Core 2 Duo or higher processor or compatible processor installed. Intel Core i5 or higher recommended for projection.
RAM	1,024 MB or more
Hard disk	At least 100 MB free space (Extra free space is required to save the projector information.)
LAN environment	For connection by wired LAN: LAN terminal (10BASE-T/100BASE-TX/1000BASE-T) is necessary. For connection by wireless LAN: Wireless LAN adapter (IEEE 802.11b/g/n/a standard compliance) is necessary.
Monitor screen	High Color (16 bits) or up
Desktop area	1024 dots x 768 dots or more 2048 dots x 1536 dots or less
Web browser	For the WEB Control function, Browser Remote Control function, moderator mode, and Content Manager function: Internet Explorer 11.0

NOTE:

• For a projector, the display resolution of projected images differs depending on the aspect ratio of the display device of the projector used.
- When 4:3: Images of 1024 x 768 dots are displayed with the number of display dots of the projector.
- When other than 4:3: Images of 1280 x 800 dots are displayed with the number of display dots of the projector.

• For a flat-panel display, images of 1280 x 800 dots are displayed with the number of display dots of the flat-panel display.

• Note that operation is not guaranteed when used with system environments other than the above or on homemade computers.

• It may not be possible to use some of the functions of a computer if it is using a wireless WAN (wireless wide area network) .

• When connecting with IEEE 802.11n standard, the wireless LAN adaptor, projector and access point used must all support the 11n standard.

• If the computer has a switchable graphics function is to be switched, remember to stop projection before switching the function.

Operation is not guaranteed for all computers that meet the above conditions.

Downloading the Software

DOWNLOADwmme64_s.zip (8.9 MB)

Right click the Download button above and select Save to file to save the installer program to the folder of your choice.
Once the installer has been downloaded, double click wmme64_s.zip. This will uncompress the installation files and create a folder named WMME6.4_s.
Double-click "WMStart.exe" to launch Wireless Manager ME6.4.
The software starts up and operation is now possible using the same procedure as when the software was installed.
When a removable media was selected as the storage destination, insert it into the computer to be connected to the projector so that it will be recognized.
The software may start up automatically with some removable media.

Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Intel and Intel Core i5 are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and/or other countries.

Other company names, product names, or other names noted on this page are trademarks or registered trademarks of the respective companies. Note that ® and ™ marks are not indicated on the text of this page.