InstallationLCD Projectors
PT-MZ20K SeriesPT-MZ20KL / PT-MZ17KL / PT-MZ14KL / PT-MZ11KL
 PT-MZ20KL |
 PT-MZ17KL |
|
|---|---|---|
| Projector type | LCD projectors | |
| LCD panel | ||
| Size | 25.4 mm (1.0 in) diagonal (16:10 aspect ratio) | |
| Display system | Transparent LCD panel (x 3, R/G/B) | |
| Drive method | Active matrix method | |
| Pixels | 2,304,000 (1920 x 1200 pixels) | |
| Light source | Laser diode | |
| Light output1
?
ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m2). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. |
20,000 lm2 / 20,000 lm (ANSI)3 | 16,500 lm2 / 16,500 lm (ANSI)3 |
| Time until light output declines to 50 %4 |
20,000 hours (NORMAL/QUIET) | |
| Resolution | WUXGA (1920 x 1200 pixels) | |
| Contrast ratio2 | 3,000,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] set to [3].) |
|
| Screen size (diagonal) | 2.03–15.24 m (80–600 in), 2.54–10.16 m
(100–400 in) with ET-EMU100, 16:10 aspect ratio |
2.03–15.24 m (80–600 in), 2.54–10.16 m (100–400 in) with ET-EMU100, 2.03–12.70 m (80–500 in) with ET-EMT8005, 16:10 aspect ratio |
| Center-to-corner zone ratio2 |
85 % | |
| Lens | Optional (no lens included with this model) | |
| Lens shift (from center of screen) |
||
| Vertical | ±60 % (+50 %, -20 % with ET-EMU100, ±40 % with ET-EMW200, ±50 % with ET-EMW300) (powered) | |
| Horizontal | ±20 % (±19 % with ET-EMW200) (powered) | |
| Keystone correction range | Vertical: ±45 ° (±5 ° with ET-EMU100, ±14 ° with ET-EMW200/ET-EMW300, ±22 ° with ET-EMW400/ET-EMW500), Horizontal: ±40 ° (±0 ° with ET-EMU100, ±8 ° with ET-EMW200/ET-EMW300, ±15 ° with ET-EMW400/ET-EMW500). When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. |
|
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| SDI IN | BNC x 1: 3G/HD-SDI input | |
| HDMI IN | HDMI 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input6), CEC supported | |
| SERIAL/MULTI PROJECTOR SYNC IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL/MULTI PROJECTOR SYNC OUT |
D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
| REMOTE 1 IN | D-sub 9-pin (female) × 1 for external control (parallel) | |
| REMOTE 2 IN | M3 x 1 for wired remote control | |
| REMOTE 2 OUT | M3 x 1 for link control (for wired remote control) | |
| DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p signal input5) |
|
| LAN | RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) | |
| DC OUT | USB connector (Type A) x 1 for power supply (Output: 5 V / 2 A) | |
| USB | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module, for USB memory | |
| Power supply | AC 100–240 V, 50/60 Hz | |
| Maximum power consumption7 | 1100 W (11.2–4.6 A) (1120 VA) | 950 W (9.6–4.0 A) (960 VA) |
| On-mode power consumption (Operating mode)7 |
|
|
| Cabinet materials | Molded plastic | |
| Filter | Included (Estimated maintenance time: approx. 20,000 hours8) | |
| Operation noise2 | 42 dB (NORMAL), 36 dB (QUIET) | 38 dB (NORMAL), 32 dB (QUIET) |
| Dimensions (W x H x D) |
Approx. 650 x 185 x 440 mm (25 19/32˝ x 7 9/32˝ x 17 5/16˝) (excluding feet and protrusions),
650 x 211 x 440 mm (25 19/32˝ x 8 5/16˝ x 17 5/16˝) (excluding protrusions, with feet at shortest position) |
|
| Weight9 | Approx. 23.0 kg (50.7 lbs) | Approx. 22.5 kg (49.6 lbs) |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)10, operating humidity: 10–80 % (no condensation) | |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Projector Network Setup Software, Smart Projector Control for iOS/Android™ |
|
| Terminals PT-MZ20K |  |
|
 PT-MZ14KL |
 PT-MZ11KL |
|
|---|---|---|
| Projector type | LCD projectors | |
| LCD panel | ||
| Size | 25.4 mm (1.0 in) diagonal (16:10 aspect ratio) | |
| Display system | Transparent LCD panel (x 3, R/G/B) | |
| Drive method | Active matrix method | |
| Pixels | 2,304,000 (1920 x 1200 pixels) | |
| Light source | Laser diode | |
| Light output1
?
ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m2). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. |
14,000 lm2 / 14,000 lm (ANSI)3 | 11,000 lm2 / 11,000 lm (ANSI)3 |
| Time until light output declines to 50 %4 |
20,000 hours (NORMAL/QUIET) | |
| Resolution | WUXGA (1920 x 1200 pixels) | |
| Contrast ratio2 | 3,000,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] set to [3].) |
|
| Screen size (diagonal) | 2.03–15.24 m (80–600 in), 2.54–10.16 m (100–400 in) with ET-EMU100, 2.03–12.70 m (80–500 in) with ET-EMT8005, 16:10 aspect ratio |
|
| Center-to-corner zone ratio2 |
85 % | |
| Lens | Optional (no lens included with this model) | |
| Lens shift (from center of screen) |
||
| Vertical | ±60 % (+50 %, -20 % with ET-EMU100, ±40 % with ET-EMW200, ±50 % with ET-EMW300) (powered) | |
| Horizontal | ±20 % (±19 % with ET-EMW200) (powered) | |
| Keystone correction range | Vertical: ±45 ° (±5 ° with ET-EMU100, ±14 ° with ET-EMW200/ET-EMW300, ±22 ° with ET-EMW400/ET-EMW500), Horizontal: ±40 ° (±0 ° with ET-EMU100, ±8 ° with ET-EMW200/ET-EMW300, ±15 ° with ET-EMW400/ET-EMW500). When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. |
|
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| SDI IN | BNC x 1: 3G/HD-SDI input | |
| HDMI IN | HDMI 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input6), CEC supported | |
| SERIAL/MULTI PROJECTOR SYNC IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL/MULTI PROJECTOR SYNC OUT |
D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
| REMOTE 1 IN | D-sub 9-pin (female) × 1 for external control (parallel) | |
| REMOTE 2 IN | M3 x 1 for wired remote control | |
| REMOTE 2 OUT | M3 x 1 for link control (for wired remote control) | |
| DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p signal input6) |
|
| LAN | RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) | |
| DC OUT | USB connector (Type A) x 1 for power supply (Output: 5 V / 2 A) | |
| USB | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module, for USB memory | |
| Power supply | AC 100–240 V, 50/60 Hz | |
| Maximum power consumption7 | 800 W (8.1–3.3 A) (810 VA) | 615 W (6.3–2.7 A) (630 VA) |
| On-mode power consumption (Operating mode)7 |
|
|
| Cabinet materials | Molded plastic | |
| Filter | Included (Estimated maintenance time: approx. 20,000 hours8) | |
| Operation noise2 | 35 dB (NORMAL), 30 dB (QUIET) | |
| Dimensions (W x H x D) |
Approx. 650 x 185 x 440 mm (25 19/32˝ x 7 9/32˝ x 17 5/16˝) (excluding feet and protrusions), 650 x 211 x 440 mm (25 19/32˝ x 8 5/16˝ x 17 5/16˝) (excluding protrusions, with feet at shortest position) |
|
| Weight9 | Approx. 22.5 kg (49.6 lbs) | |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)10, operating humidity: 10–80 % (no condensation) | |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Projector Network Setup Software, Smart Projector Control for iOS/Android™ |
|
1 When [OPERATING MODE] is set to [NORMAL]. This is the value when the Zoom Lens (Model No.: ET-EMS650) is used. The value varies depending on the lens.
2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
3 Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped.
4 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, Normal Mode, [DYNAMIC CONTRAST] set to [3], under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output decreases to 50 % will vary depending on environment.
5 ET-EMT800 is compatible with PT-MZ17KL/MZ14KL/MZ11KL only. It cannot be used with PT-MZ20KL.
6 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection. 4K/60p and 4K/50p signals input via DIGITAL LINK are supported in YPBPR 4:2:0 format only.
7 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft).
8 Under conditions of 0.15 mg/m3 of particulate matter. Estimated maintenance time varies depending on environment. Filter can be washed and reused up to two times.
9 Average value. May differ depending on the actual unit.
10 Note that the projector cannot be used at altitudes 2,700 m (8,858 ft) or higher above sea level. In the following operating environments, light output may be reduced to protect the projector: when the projector is used at altitudes below 1,400 m (4,593 ft) and ambient temperature is 35 °C (95 °F) or higher; when the projector is used at altitudes between 1,400 m (4,593 ft) and 2,700 m (8,858 ft) exclusive and ambient temperature is 30 °C (86 °F) or higher. The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) when the optional AJ-WM50 Series Wireless Module is attached.
