PT-REQ12 SeriesPT-REQ12 / PT-REQ10 / PT-REQ80

	PT-REQ12 | PT-REQ12L	PT-REQ10 | PT-REQ10L
Projector type	1-Chip DLP™ projectors
DLP™ chip
Panel size	0.8 in diagonal (16:10 aspect ratio)
Display method	DLP™ chip x 1, DLP™ projection system
Number of pixels	2,304,000 (1920 x 1200 pixels)
Light source	Laser diode
Light output1, 2	12,000 lm / 12,400 lm (Center)3	10,000 lm / 10,300 lm (Center)3
Time until light output declines to 50 %4	20,000 hours (NORMAL/QUIET), 24,000 hours (ECO)
Resolution	4K (3840 x 2400 pixels) (Quad Pixel Drive: ON)
Contrast ratio1	25,000:1 (Full On/Full Off, Dynamic Contrast [3])
Screen size (diagonal)	70–700 inches (with supplied lens)
Center-to-corner zone ratio1	90 %
Lens	PT-REQ12/REQ10: Powered zoom (throw ratio 1.36–2.10:1 for supplied lens), powered focus PT-REQ12L/REQ10L: Optional powered zoom/focus lenses
Lens shift (From the origin point of the lens mounter)
Vertical	±60 % (with ET-C1W400/W500/S600/T700), ±50 % (with ET-C1W300/U100)
Horizontal	±29 % (with ET-C1W400/W500/S600/T700), ±23 % (with ET-C1W300/U100)
Keystone correction range	Vertical: ±40 ° (±5 ° with ET-C1U100; ±10 ° with ET-C1W300; ±16 ° with ET-C1W400; ±22 ° with ET-C1W500), Horizontal: ±40 ° (±3 ° with ET-C1U100; ±5 ° with ET-C1W300; ±10 ° with ET-C1W400; ±15 ° with ET-C1W500)
Installation	Ceiling/floor, front/rear, free 360-degree installation
Terminals
HDMI™ 1/2 IN	HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)
DisplayPort™	DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)
MULTI SYNC IN	BNC x 1
MULTI SYNC OUT	BNC x 1
SERIAL IN	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT	D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
REMOTE 1 IN	M3 stereo mini-jack x 1 for wired remote control
REMOTE 1 OUT	M3 stereo mini-jack x 1 for link control (for wired remote control)
REMOTE 2 IN	D-sub 9-pin (female) x 1 for external control (parallel)
LAN	RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
USB	USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory
DC OUT	USB Type A x 1 (for power supply, DC 5 V, 2 A)
Expansion slot	Open slot for function boards, Intel® SDM compatible
Protocol versions	IPv4, IPv65
Power supply	AC 100–240 V, 50/60 Hz
Maximum power consumption6	1,030 W (10.4–4.3 A) (1,040 VA) (Power consumption is 990 W at AC 200–240 V)	870 W (8.8–3.7 A) (880 VA) (Power consumption is 840 W at AC 200–240 V)
On-mode power consumption (Operating mode)6	[NORMAL] 880 W (AC 100–120 V), 840 W (AC 200–240 V) [ECO] 680 W (AC 100–120 V), 655 W (AC 200–240 V) [QUIET] 670 W (AC 100–120 V), 645 W (AC 200–240 V)	[NORMAL] 725 W (AC 100–120 V), 695 W (AC 200–240 V) [ECO] 565 W (AC 100–120 V), 545 W (AC 200–240 V) [QUIET] 555 W (AC 100–120 V), 535 W (AC 200–240 V)
Cabinet materials	Molded plastic
Operation noise1	38 dB (NORMAL/ECO), 35 dB (QUIET)	36 dB (NORMAL/ECO), 33 dB (QUIET)
Dimensions (W x H x D)	PT-REQ12/REQ10: 498 x 212 x 648 mm (19 19/32" x 8 11/32˝ x 25 1/2˝) (With feet at shortest position) PT-REQ12L/REQ10L: 498 x 212 x 538 mm (19 19/32" x 8 11/32˝ x 21 3/16˝) (With feet at shortest position)
Weight7	PT-REQ12/REQ10: Approx. 28.7 kg (63.27 lbs) (with supplied lens) PT-REQ12L/REQ10L: Approx. 27.0 kg (59.52 lbs) (without lens)
Operating environment	Operating temperature: 0–45 °C (32–113 °F)8, operating humidity: 10–80 % (no condensation)
Applicable software	Logo Transfer Software, Multi Monitoring & Control Software, Projector Network Setup Software, Real-Time Tracking Projection-Mapping System, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™
Control function via LAN	Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2)

1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.

2 When [OPERATING MODE] is set to [NORMAL].

3 Average light-output value of all shipped products measured at the center of the screen in NORMAL Mode.

4 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, Dynamic Contrast [3], temperature 35 °C (95 °F), elevation 700 m (2,297 ft) with
0.15 mg/m³ of airborne particulate matter. The estimated time until light output declines to 50 % varies depending on the environment.

5 Optional AJ-WM50 Series Wireless Module is not compatible with IPv6.

6 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft).

7 Average value. May differ depending on the actual unit.

8 When the optional AJ-WM50 Series wireless module is attached, the operating temperature range becomes 0–40 °C (32–104 °F). The operating environment temperature should be between
0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft).