Installation1-Chip DLP™ Projectors
PT-REQ15 SeriesPT-REQ15 / PT-REQ12 / PT-REQ10 / PT-REQ80
 PT-REQ15/L |
 PT-REQ12/L |
|
|---|---|---|
| Projector type | 1-Chip DLP™ projectors | |
| DLP™ chip | ||
| Panel size | 0.8 in diagonal (16:10 aspect ratio) | |
| Display method | DLP™ chip x 1, DLP™ projection system | |
| Number of pixels | 2,304,000 (1920 x 1200 pixels) | |
| Light source | Laser diode | |
| Light output1, 2
?
ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m2). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. |
15,000 lm3 / 15,000 lm (ANSI)4 / 15,500 lm (Center)5 | 12,000 lm3 / 12,000 lm (ANSI)4 / 12,400 lm (Center)5 |
| Time until light output declines to 50 %6 |
20,000 hours (NORMAL/QUIET), 24,000 hours (ECO) | |
| Resolution | 4K (3840 x 2400 pixels) (Quad Pixel Drive: ON) | |
| Contrast ratio3 | 25,000:1 (Full On/Full Off, Dynamic Contrast [3]) | |
| Screen size (diagonal) | 70–1000 inches (with ET-C1S600) | |
| Center-to-corner zone ratio3 |
90 % | |
| Lens | PT-REQ15/REQ12: Powered zoom (throw ratio 1.36–2.10:1 for supplied lens),
powered focus PT-REQ15L/REQ12L: Optional powered zoom/focus lenses |
|
| Lens shift (From the origin point of the lens mounter) |
||
| Vertical | ±60 % (with ET-C1W400/W500/S600/T700), ±50 % (with ET-C1W300/U100) | |
| Horizontal | ±29 % (with ET-C1W400/W500/S600/T700), ±23 % (with ET-C1W300/U100) | |
| Keystone correction range | Vertical: ±40 ° (±5 ° with ET-C1U100; ±10 ° with ET-C1W300; ±16 ° with ET-C1W400; ±22 ° with ET-C1W500) Horizontal: ±40 ° (±3 ° with ET-C1U100; ±5 ° with ET-C1W300; ±10 ° with ET-C1W400; ±15 ° with ET-C1W500) |
|
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| HDMI™ 1/2 IN | HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input) |
|
| DisplayPort™ | DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input) |
|
| MULTI SYNC IN | BNC x 1 | |
| MULTI SYNC OUT | BNC x 1 | |
| SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
| REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control | |
| REMOTE 1 OUT | M3 stereo mini-jack x 1 for link control (for wired remote control) | |
| REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |
| LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
| USB | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory | |
| DC OUT | USB Type A x 1 (for power supply, DC 5 V, 2 A) | |
| Expansion slot | Open slot for function boards, Intel® SDM standard-compatible | |
| Protocol versions | IPv4, IPv67 | |
| Power supply | AC 100–240 V, 50/60 Hz | |
| Maximum power consumption8, 9 | 1,140 W (11.5–4.7 A) (1,150 VA) (Power consumption is 1,090 W at AC 200–240 V) |
1,030 W (10.4–4.3 A) (1,040 VA) (Power consumption is 990 W at AC 200–240 V) |
| On-mode power consumption (Operating mode)8 |
|
|
| Cabinet materials | Molded plastic | |
| Operation noise3 | 42 dB (NORMAL/ECO), 38 dB (QUIET) | 38 dB (NORMAL/ECO), 35 dB (QUIET) |
| Dimensions (W x H x D) |
PT-REQ15/REQ12: 498 x 212 x 648 mm (19 19/32˝ x 8 11/32˝ x 25 1/2˝) (With feet at shortest position) |
|
| Weight10 | PT-REQ15/REQ12: Approx. 28.7 kg (63.27 lbs) (with supplied lens) PT-REQ15L/REQ12L: Approx. 27.0 kg (59.52 lbs) (without lens) |
|
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)11, operating humidity: 10–80 % (no condensation) |
|
| Applicable software | Logo Transfer Software12, Multi Monitoring & Control Software, Projector Network Setup Software, Real-Time Tracking Projection-Mapping System, Geometry Manager Pro, Smart Projector Control for iOS/Android™ |
|
| Control function via LAN |
Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2) | |
PT-REQ10/L |
 PT-REQ80/L |
|
|---|---|---|
| Projector type | 1-Chip DLP™ projectors | |
| DLP™ chip | ||
| Panel size | 0.8 in diagonal (16:10 aspect ratio) | |
| Display method | DLP™ chip x 1, DLP™ projection system | |
| Number of pixels | 2,304,000 (1920 x 1200 pixels) | |
| Light source | Laser diode | |
| Light output1, 2
?
ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m2). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. |
10,000 lm3 / 10,000 lm (ANSI)4 / 10,300 lm (Center)5 | 8,000 lm3 / 8,000 lm (ANSI)4 / 8,200 lm (Center)5 |
| Time until light output declines to 50 %6 |
20,000 hours (NORMAL/QUIET), 24,000 hours (ECO) | |
| Resolution | 4K (3840 x 2400 pixels) (Quad Pixel Drive: ON) | |
| Contrast ratio3 | 25,000:1 (Full On/Full Off, Dynamic Contrast [3]) | |
| Screen size (diagonal) | 70–1000 inches (with ET-C1S600) | |
| Center-to-corner zone ratio3 |
90 % | |
| Lens | PT-REQ10/REQ80: Powered zoom (throw ratio 1.36–2.10:1 for supplied lens), powered focus PT-REQ10L/REQ80L: Optional powered zoom/focus lenses |
|
| Lens shift (From the origin point of the lens mounter) |
||
| Vertical | ±60 % (with ET-C1W400/W500/S600/T700), ±50 % (with ET-C1W300/U100) | |
| Horizontal | ±29 % (with ET-C1W400/W500/S600/T700), ±23 % (with ET-C1W300/U100) | |
| Keystone correction range | Vertical: ±40 ° (±5 ° with ET-C1U100; ±10 ° with ET-C1W300; ±16 ° with ET-C1W400; ±22 ° with ET-C1W500) Horizontal: ±40 ° (±3 ° with ET-C1U100; ±5 ° with ET-C1W300; ±10 ° with ET-C1W400; ±15 ° with ET-C1W500) |
|
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| HDMI™ 1/2 IN | HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input) |
|
| DisplayPort™ | DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input) |
|
| MULTI SYNC IN | BNC x 1 | |
| MULTI SYNC OUT | BNC x 1 | |
| SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
| REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control | |
| REMOTE 1 OUT | M3 stereo mini-jack x 1 for link control (for wired remote control) | |
| REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |
| LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
| USB | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory | |
| DC OUT | USB Type A x 1 (for power supply, DC 5 V, 2 A) | |
| Expansion slot | Open slot for function boards, Intel® SDM standard-compatible | |
| Protocol versions | IPv4, IPv67 | |
| Power supply | AC 100–240 V, 50/60 Hz | |
| Maximum power consumption8, 9 | 870 W (8.8–3.7 A) (880 VA) (Power consumption is 840 W at AC 200–240 V) |
760 W (7.7–3.2 A) (770 VA) (Power consumption is 730 W at AC 200–240 V) |
| On-mode power consumption (Operating mode)8 |
|
|
| Cabinet materials | Molded plastic | |
| Operation noise3 | 36 dB (NORMAL/ECO), 33 dB (QUIET) | 35 dB (NORMAL/ECO), 32 dB (QUIET) |
| Dimensions (W x H x D) |
PT-REQ10/REQ80: 498 x 212 x 648 mm (19 19/32˝ x 8 11/32˝ x 25 1/2˝) (With feet at shortest position) PT-REQ10L/REQ80L: 498 x 212 x 538 mm (19 19/32˝ x 8 11/32˝ x 21 3/16˝) (With feet at shortest position) |
|
| Weight10 | PT-REQ10/REQ80: Approx. 28.7 kg (63.27 lbs) (with supplied lens) PT-REQ10L/REQ80L: Approx. 27.0 kg (59.52 lbs) (without lens) |
|
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)11, operating humidity: 10–80 % (no condensation) |
|
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Projector Network Setup Software, Real-Time Tracking Projection-Mapping System, Geometry Manager Pro, Smart Projector Control for iOS/Android™ |
|
| Control function via LAN |
Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2) | |
1 This is the value when the Zoom Lens (Model No.: ET‑C1S600) is used. The value varies depending on the lens.
2 When [OPERATING MODE] is set to [NORMAL].
3 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
4 Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped.
5 Average light-output value of all shipped products measured at the center of the screen.
6 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, Dynamic Contrast [3], temperature 35 °C (95 °F), elevation 700 m (2,297 ft) with
0.15 mg/m3 of airborne particulate matter. The estimated time until light output declines to 50 % varies depending on the environment.
7 Optional AJ-WM50 Series Wireless Module is not compatible with IPv6.
8 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft).
9 This value has included a maximum power consumption of 80 W when using a function board.
10 Average value. May differ depending on the actual unit.
11 When the optional AJ-WM50 Series wireless module is attached, the operating temperature range becomes 0–40 °C (32–104 °F). The operating environment temperature should be between
0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft).
12 Excluding the REQ15. Software replaced with equivalent functions in the Web Control UI.
