LARGE VENUE3-Chip DLP™ Projector
PT-RQ50K
 PT-RQ50K |
||
|---|---|---|
| Projector type | 3-Chip DLP™ projector | |
| DLP™ chip | ||
| Panel size | 35.1 mm (1.38 in) diagonal (17:9 aspect ratio) | |
| Display method | DLP™ chip x 3, DLP™ projection system | |
| Number of pixels | 8,847,360 (4096 x 2160 pixels) x 3 | |
| Light source | Laser diodes (Blue LD, Red LD) | |
| Light output*1
?
ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m2). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. |
50,000 lm*2 / 50,000 lm (ANSI)*3 / 51,000 lm (Center)*4 | |
| Time until light output declines to 50 %*5 | 20,000 hours (NORMAL) | |
| Resolution | Native 4K (4096 x 2160 pixels) | |
| Contrast ratio*2 | 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3) | |
| Screen size (diagonal) | 2.54–38.1 m (100–1,500 in) with new optional lens for PT-RQ50K, 17:9 aspect ratio | |
| Center-to-corner zone ratio*2 |
90 % | |
| Lens | New optional lenses for PT-RQ50K (no lens included with this model) | |
| Lens shift | ||
| Vertical (from center of screen) |
±45 % (±25 % with ET-D3QT600, ±30 % with ET-D3QT700/ET-D3QT800, ±40 % with ET-D3QW300) (powered) | |
| Horizontal (from center of screen) |
±16 % (±8 % with ET-D3QT600, ±10 % with ET-D3QT700/ET-D3QT800, ±14 % with ET-D3QW300) (powered) | |
| Keystone correction range | Vertical: ±40 ° (±28 ° with ET-D3QW300), Horizontal: ±40 ° (±15 ° with ET-D3QW300) | |
| Installation | Horizontal/vertical, free 360-degree installation | |
| Terminals | ||
| MULTI PROJECTOR SYNC IN | BNC x 1 | |
| MULTI PROJECTOR SYNC OUT | BNC x 1 | |
| SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
| REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control | |
| REMOTE 1 OUT | M3 stereo mini-jack x 1 for link control | |
| REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |
| DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible | |
| LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
| DC OUT | USB Connector (Type A) x 2 for power supply only (DC 5 V, total of 2 A) | |
| USB | USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series) / USB Memory Stick | |
| Expansion Slot 1 | Interface Board for 12G-SDI (ET-MDN12G10) supplied | |
| Expansion Slot 2 | Optional interface boards, SLOT NX compatible | |
| Power supply | AC 200–240 V, 50/60 Hz; AC 100–120 V, 50/60 Hz | |
| Maximum power consumption | 4,100 W (AC 100–120 V: 1,100 W, Standby Mode: 6 W) | |
| On-mode power consumption (Operating mode) |
|
|
| Cabinet materials | Fabricated metal and molded plastic | |
| Operation noise*2 | 52 dB | |
| Dimensions (W x H x D) | 720 x 445 x 1,070 mm (28 11/32˝ x 17 17/32˝ x 42 1/8˝ ) (excluding handle, adjuster feet, and other protruding parts) | |
| Weight*6 | Approx. 126 kg (278 lbs) (without lens) | |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)*7, *8, *9, operating humidity: 10–80 % (no condensation) | |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™ | |
*1 When [OPERATING MODE] is set to [NORMAL].
*2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
*3 Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped.
*4 Average light-output value of all shipped products measured at the center of the screen.
*5 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [3], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment.
*6 Average value. May differ depending on the actual unit.
*7 The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft).
*8 When optional AJ-WM50 wireless module is attached, operating temperature range becomes 0–40 °C (32–104 °F).
*9 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the projector.
