Installation1-Chip DLP™ Projectors
PT-RQ7 SeriesPT-RQ7L / PT-RQ6L / PT-RZ7L / PT-RZ6L
 PT-RQ7L |
 PT-RQ6L |
|
|---|---|---|
| Projector type | 1-Chip DLP™ projectors | |
| DLP™ chip | ||
| Panel size | 16.5 mm (0.65 in) diagonal (16:9 aspect ratio) | |
| Display method | DLP™ chip x 1, DLP™ projection system | |
| Number of pixels | 2,073,600 (1920 x 1080 pixels) | |
| Light source | Laser diode | |
| Light output1
?
ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m2). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. |
7,500 lm2 / 7,500 lm (ANSI)3 / 7,700 lm (Center)4 | 6,500 lm2 / 6,500 lm (ANSI)3 / 6,700 lm (Center)4 |
| Time until light output declines to 50 %5 |
20,000 hours (NORMAL/QUIET), 24,000 hours (ECO) | |
| Resolution | 4K (3840 x 2160 pixels) (Quad Pixel Drive: ON) | |
| Contrast ratio2 | 15,000:1 (Full On/Full Off, Dynamic Contrast [3]) | |
| Screen size (diagonal) | 1.27–5.08 m (50–200 in) with ET-DLE055, 1.27–15.24 m (50–600 in) with ET-DLE060/ET-DLE085/ET-DLE105/ET-DLE150/ET-DLE170/ET-DLE250/ET-DLE350/ET-DLE450, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020G/ET-DLE020 |
|
| Center-to-corner zone ratio2 |
90 % | |
| Lens | Optional (no lens included with this model) | |
| Lens shift (From the origin point of the lens mounter) |
||
| Vertical | +66 %, -18 % (with ET-DLE150/ET-DLE170/ET-DLE250/ET-DLE350/ET-DLE450); +60 %, -18 % (with ET-DLE085/ET-DLE105); +50 %, -18 % (with ET-DLE060); +55 %, -22 % (with ET-DLE020G/ET-DLE020); +97 % (with ET-DLE035); (powered) |
|
| Horizontal6 | +30 %, -10 % (with ET-DLE150/ET-DLE170/ET-DLE250/ET-DLE350/ET-DLE450); +28 %, -10 % (with ET-DLE085/ET-DLE105); +19 %, -10 % (with ET-DLE060); +10 %, -20 % (with ET-DLE020G/ET-DLE020); (powered) |
|
| Keystone correction range | Vertical: ±45 ° (±5 ° with ET-DLE020G/ET-DLE020, +5 ° with ET-DLE035, ±16 ° with ET-DLE060, ±22 ° with ET-DLE55/ET-DLE085/ ET-DLE105, ±40 ° with ET-DLE150/ET-DLE170/ET-DLE250) Horizontal: ±40 ° ( ±10 ° with ET-DLE060, ±15 ° with ET-DLE55/ET-DLE085/ET-DLE105, cannot be used with ET-DLE020G/ET-DLE020/ET-DLE035) |
|
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| HDMI™ IN | HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input) | |
| SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
| REMOTE IN | M3 stereo mini-jack x 1 for wired remote control | |
| REMOTE OUT | M3 stereo mini-jack x 1 for link control (for wired remote control) | |
| DIGITAL LINK/LAN | RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p7 signal input) |
|
| LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
| USB (DC OUT) | USB connector (Type A) x 1 for DC 5 V/ 2 A power supply, optional AJ-WM50 Series Wireless Module, and data transfer from USB memory |
|
| Expansion slot | Open slot for function boards, Intel® SDM standard-compatible | |
| Protocol versions | IPv4, IPv68 | |
| Power supply | AC 100–240 V, 50/60 Hz | |
| Maximum power consumption9 | 670 W (6.8–2.8 A) (680 VA) (Power consumption is 650 W at AC 200–240 V) |
600 W (6.1–2.5 A) (610 VA) (Power consumption is 580 W at AC 200–240 V) |
| On-mode power consumption (Operating mode)9 |
|
|
| Cabinet materials | Molded plastic | |
| Operation noise2 | 35 dB (NORMAL/ECO), 32 dB (QUIET) | 34 dB (NORMAL/ECO), 31 dB (QUIET) |
| Dimensions (W x H x D) |
498 x 170 x 440 mm (19 19/32˝ x 6 11/16˝ x 17 5/16˝) (With legs at shortest position, excluding protruding parts) |
|
| Weight10 | 16.6 kg (36.59 lbs) | |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)11, operating humidity: 10–80 % (no condensation) | |
| Applicable software | Multi Monitoring & Control Software, Projector Network Setup Software, Real-Time Tracking Projection-Mapping System12, Geometry Manager Pro, Smart Projector Control for iOS/Android™ | |
| Control function via LAN |
Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2) | |
 PT-RZ7L |
 PT-RZ6L |
|
|---|---|---|
| Projector type | 1-Chip DLP™ projectors | |
| DLP™ chip | ||
| Panel size | 17.0 mm (0.67 in) diagonal (16:10 aspect ratio) | |
| Display method | DLP™ chip x 1, DLP™ projection system | |
| Number of pixels | 2,304,000 (1920 x 1200 pixels) | |
| Light source | Laser diode | |
| Light output1
?
ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m2). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. |
7,500 lm2 / 7,500 lm (ANSI)3 / 7,700 lm (Center)4 | 6,500 lm2 / 6,500 lm (ANSI)3 / 6,700 lm (Center)4 |
| Time until light output declines to 50 %5 |
20,000 hours (NORMAL/QUIET), 24,000 hours (ECO) | |
| Resolution | WUXGA (1920 x 1200 pixels) | |
| Contrast ratio2 | 15,000:1 (Full On/Full Off, Dynamic Contrast [3]) | |
| Screen size (diagonal) | 1.27–5.08 m (50–200 in) with ET-DLE055, 1.27–15.24 m (50–600 in) with ET-DLE060/ET-DLE085/ET-DLE105/ET-DLE150/ET-DLE170/ET-DLE250/ET-DLE350/ET-DLE450, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020G/ET-DLE020 |
|
| Center-to-corner zone ratio2 |
90 % | |
| Lens | Optional (no lens included with this model) | |
| Lens shift (From the origin point of the lens mounter) |
||
| Vertical | +60 %, -16 % (with ET-DLE150/ET-DLE170/ET-DLE250/ET-DLE350/ET-DLE450); +55 %, -16 % (with ET-DLE085/ET-DLE105); +40 %, -16 % (with ET-DLE060); +50 %, -20 % (with ET-DLE020G/ET-DLE020); +88 % (with ET-DLE035); (powered) |
|
| Horizontal6 | +30 %, -10 % (with ET-DLE150/ET-DLE170/ET-DLE250/ET-DLE350/ET-DLE450); +28 %, -10 % (with ET-DLE085/ET-DLE105); +19 %, -10 % (with ET-DLE060); +10 %, -20 % (with ET-DLE020G/ET-DLE020); (powered) |
|
| Keystone correction range | Vertical: ±45 ° (±5 ° with ET-DLE020G/ET-DLE020,, +5 ° with ET-DLE035, ±16 ° with ET-DLE060, ±22 ° with ET-DLE55/ET-DLE085/ ET-DLE105, ±40 ° with ET-DLE150/ET-DLE170/ET-DLE250) Horizontal: ±40 ° ( ±10 ° with ET-DLE060, ±15 ° with ET-DLE55/ET-DLE085/ET-DLE105, cannot be used with ET-DLE020G/ET-DLE020/ET-DLE035) |
|
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| HDMI™ IN | HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input13) | |
| SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
| REMOTE IN | M3 stereo mini-jack x 1 for wired remote control | |
| REMOTE OUT | M3 stereo mini-jack x 1 for link control (for wired remote control) | |
| DIGITAL LINK/LAN | RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p7, 13 signal input) |
|
| LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
| USB (DC OUT) | USB connector (Type A) x 1 for DC 5 V/ 2 A power supply, optional AJ-WM50 Series Wireless Module, and data transfer from USB memory |
|
| Expansion slot | Open slot for function boards, Intel® SDM standard-compatible | |
| Protocol versions | IPv4, IPv68 | |
| Power supply | AC 100–240 V, 50/60 Hz | |
| Maximum power consumption9 | 660 W (6.8–2.8 A) (680 VA) (Power consumption is 640 W at AC 200–240 V) |
590 W (6.1–2.5 A) (610 VA) (Power consumption is 570 W at AC 200–240 V) |
| On-mode power consumption (Operating mode)9 |
|
|
| Cabinet materials | Molded plastic | |
| Operation noise2 | 35 dB (NORMAL/ECO), 32 dB (QUIET) | 34 dB (NORMAL/ECO), 31 dB (QUIET) |
| Dimensions (W x H x D) |
498 x 170 x 440 mm (19 19/32˝ x 6 11/16˝ x 17 5/16˝) (With legs at shortest position, excluding protruding parts) |
|
| Weight10 | 16.6 kg (36.59 lbs) | |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)11, operating humidity: 10–80 % (no condensation) | |
| Applicable software | Multi Monitoring & Control Software, Projector Network Setup Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™ | |
| Control function via LAN |
Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2) | |
1 When ET-DLE170 is attached. When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL].
2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
3 Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped.
4 Average light-output value of all shipped products measured at the center of the screen.
5 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, Dynamic Contrast [3], temperature 35 °C (95 °F), elevation 700 m (2,297 ft), with
0.15 mg/m3 of airborne particulate matter. The estimated time until light output declines to 50 % varies depending on the environment.
6 Cannot be used when ET-DLE035 is installed.
7 Supports YPBPR 4:2:0 format only for 4K/60p and 4K/50p signals input via DIGITAL LINK.
8 Optional AJ-WM50 Series Wireless Module is not compatible with IPv6.
9 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft).
10 Average value. May differ depending on the actual unit.
11 When the optional AJ-WM50 Series wireless module is attached, the operating temperature range becomes 0–40 °C (32–104 °F). Note that the projector cannot be used at altitudes 4,200 m
(13,780 ft) or higher above sea level. In the following operating environments, light output may be reduced to protect the projector: when the projector is used at altitudes below 1,400 m (4,593 ft) and ambient temperature is 35 °C (95 °F) or higher; when the projector is used at altitudes between 1,400 m (4,593 ft) and 2,700 m (8,858 ft) exclusive and ambient temperature is 30 °C (86 °F) or higher; and when the projector is used at altitudes between 2,700 m (8,858 ft) and 4,200 m (13,780 ft) exclusive and ambient temperature is 25 °C (77 °F) or higher.
12 PT-RQ7L/RQ6L only.
13 4K signals are converted to WUXGA (1920 x 1200 pixels) only for the PT-RZ7L/RZ6L.
