Installation1-Chip DLP™ Projectors
PT-RZ990 Series
PT-RZ990 / PT-RZ990L
PT-RZ890 / PT-RZ890L
PT-RZ790 / PT-RZ790L / PT-RZ690 / PT-RZ690L
 PT-RZ990/RZ990L |
 PT-RZ890/RZ890L |
|
|---|---|---|
| Projector type | 1-Chip DLP™ projector | |
| DLP™ chip | ||
| Panel size | 17.0 mm (0.67 in) diagonal (16:10 aspect ratio) | |
| Display method | DLP™ chip x 1, DLP™ projection system | |
| Number of pixels | 2,304,000 (1920 x 1200 pixels) | |
| Light source | Laser diodes | |
| Light output
?
ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m2). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. |
9,400 lm (Normal)*1/9,400 lm (ANSI)*2/10,000 lm (Center)*3/ 7,500 lm (Eco)*1/8,000 lm (Quiet 1)*1/6,000 lm (Quiet 2)*1/ 3,700 lm (Long Life 1)*1/3,100 lm (Long Life 2)*1/ 2,500 lm (Long Life 3)*1 |
8,500 lm (Normal)*1/8,500 lm (ANSI)*2/8,800 lm (Center)*3/ 6,800 lm (Eco)*1/7,200 lm (Quiet 1)*1/5,400 lm (Quiet 2)*1/ 3,400 lm (Long Life 1)*1/2,900 lm (Long Life 2)*1/ 2,300 lm (Long Life 3)*1 |
| Time until light output declines to 50 %*4 | 20,000 hours (Normal/Quiet 1/Quiet 2)/24,000 hours (Eco) | |
| Resolution | 1920 x 1200 pixels | |
| Contrast ratio*1 | 10,000:1 (Full On/Full Off, Dynamic Contrast [3]) | |
| Screen size (diagonal) | 1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020, 16:10 aspect ratio |
|
| Center-to-corner zone ratio*1 | 90 % | |
| Lens | PT-RZ990/RZ890: Powered zoom (throw ratio 1.71–2.41:1), powered focus F 1.7–1.9, f 25.6–35.7 mm PT-RZ990L/RZ890L: Optional powered zoom/focus lenses |
|
| Lens shift*5 (From the origin point of the lens mounter) |
||
| Vertical | +50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered) | |
| Horizontal | +30 %, -10 % (+10 %, -20 % with ET-DLE020, +19 %, -10 % with ET-DLE060, +28 %, -10 % with ET-DLE105/ET-DLE085) (powered) |
|
| Keystone correction range | Vertical: ±40 ° (±5 ° with ET-DLE020, ±16 ° with ET-DLE060, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055, +5 ° with ET-DLE035), Horizontal: ±15 ° (±10 ° with ET-DLE060) (cannot be operated with ET-DLE035/ET-DLE020) |
|
| Keystone correction range with optional ET-UK20 Upgrade Kit | Vertical: ±45 ° (±16 ° with ET-DLE060, ±40 ° with ET-DLE150/ET-DLE250/ET-DLE170, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055), Horizontal: ±40 ° (±10 ° with ET-DLE060, ±15 ° with ET-DLE105/ET-DLE085/ET-DLE055) When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. |
|
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| SDI IN | BNC x 1: 3G/HD/SD-SDI input | |
| HDMI IN | HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K/60p signal input*6) | |
| DVI-D IN | DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) | |
| RGB 1 IN | RGB x 1 (BNC x 5): RGB/YPBPR/YCBCR | |
| RGB 2 IN | D-sub HD 15-pin (female) x 1: RGB/YPBPR/YCBCR | |
| SERIAL/MULTI PROJECTOR SYNC IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL/MULTI PROJECTOR SYNC OUT | D-sub 9-pin (male) x 1 for link control | |
| REMOTE 1 IN | M3 x 1 for wired remote control | |
| REMOTE 1 OUT | M3 x 1 for link control (for wired remote control) | |
| REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |
| DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible, 4K/60p signal input*6 | |
| LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
| Power supply | AC 100–240 V, 50/60 Hz | |
| Maximum power consumption | 880 W (8.6–3.5A) (0.5 W with Standby Mode set to ECO, 7 W with Standby Mode set to NORMAL) | 770 W (8.1–3.3A) (0.5 W with Standby Mode set to ECO, 7 W with Standby Mode set to NORMAL) |
| On-mode power consumption (Operating mode) |
|
|
| Cabinet materials | Molded plastic | |
| Operation noise*1 | 40 dB (Normal) / 36 dB (Quiet1) / 35 dB (Quiet2) | |
| Dimensions (W x H x D) | PT-RZ990/RZ890: 498 x 200*7 x 581 mm (19 19/32˝ x 7 7/8˝*7 x 22 7/8˝) (with supplied lens) PT-RZ990L/RZ890L: 498 x 200*7 x 538 mm (19 19/32˝ x 7 7/8˝*7 x 21 3/16˝) (without lens) |
|
| Weight*8 | PT-RZ990/RZ890: Approx. 23.0 kg (50.7 lbs) (with supplied lens) PT-RZ990L/RZ890L: Approx. 22.2 kg (48.9 lbs) (without lens) |
|
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)*9, operating humidity: 10–80 % (no condensation) | |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™ | |
 PT-RZ790/RZ790L |
 PT-RZ690/RZ690L |
|
|---|---|---|
| Projector type | 1-Chip DLP™ projector | |
| DLP™ chip | ||
| Panel size | 17.0 mm (0.67 in) diagonal (16:10 aspect ratio) | |
| Display method | DLP™ chip x 1, DLP™ projection system | |
| Number of pixels | 2,304,000 (1920 x 1200 pixels) | |
| Light source | Laser diodes | |
| Light output
?
ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m2). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. |
7,000 lm (Normal)*1/7,000 lm (ANSI)*2/7,200 lm (Center)*3/ 5,600 lm (Eco)*1/2,800 lm (Long Life 1)*1/ 2,300 lm (Long Life 2)*1/1,900 lm (Long Life 3)*1 |
6,000 lm (Normal)*1/6,000 lm (ANSI)*2/6,200 lm (Center)*3/ 4,800 lm (Eco)*1/2,400 lm (Long Life 1)*1/ 2,000 lm (Long Life 2)*1/1,600 lm (Long Life 3)*1 |
| Time until light output declines to 50 %*4 | 20,000 hours (Normal)/24,000 hours (Eco) | |
| Resolution | 1920 x 1200 pixels | |
| Contrast ratio*1 | 10,000:1 (Full On/Full Off, Dynamic Contrast [3]) | |
| Screen size (diagonal) | 1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020, 16:10 aspect ratio |
|
| Center-to-corner zone ratio*1 | 90 % | |
| Lens | PT-RZ790/RZ690: Powered zoom (throw ratio 1.71–2.41:1), powered focus F 1.7–1.9, f 25.6–35.7 mm PT-RZ790L/RZ690L: Optional powered zoom/focus lenses |
|
| Lens shift*5 (From the origin point of the lens mounter) |
||
| Vertical | +50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered) | |
| Horizontal | +30 %, -10 % (+10 %, -20 % with ET-DLE020, +19 %, -10 % with ET-DLE060, +28 %, -10 % with ET-DLE105/ET-DLE085) (powered) |
|
| Keystone correction range | Vertical: ±40 ° (±5 ° with ET-DLE020, ±16 ° with ET-DLE060, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055, +5 ° with ET-DLE035), Horizontal: ±15 ° (±10 ° with ET-DLE060) (cannot be operated with ET-DLE035/ET-DLE020) |
|
| Keystone correction range with optional ET-UK20 Upgrade Kit | Vertical: ±45 ° (±16 ° with ET-DLE060, ±40 ° with ET-DLE150/ET-DLE250/ET-DLE170, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055), Horizontal: ±40 ° (±10 ° with ET-DLE060, ±15 ° with ET-DLE105/ET-DLE085/ET-DLE055) When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. |
|
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| SDI IN | BNC x 1: 3G/HD/SD-SDI input | |
| HDMI IN | HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K/60p signal input*6) | |
| DVI-D IN | DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) | |
| RGB 1 IN | RGB x 1 (BNC x 5): RGB/YPBPR/YCBCR | |
| RGB 2 IN | D-sub HD 15-pin (female) x 1: RGB/YPBPR/YCBCR | |
| SERIAL/MULTI PROJECTOR SYNC IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL/MULTI PROJECTOR SYNC OUT | D-sub 9-pin (male) x 1 for link control | |
| REMOTE 1 IN | M3 x 1 for wired remote control | |
| REMOTE 1 OUT | M3 x 1 for link control (for wired remote control) | |
| REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |
| DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible, 4K/60p signal input*6 | |
| LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
| Power supply | AC 100–240 V, 50/60 Hz | |
| Maximum power consumption | 630 W (6.5–2.6 A) (0.5 W with Standby Mode set to ECO, 7 W with Standby Mode set to NORMAL) | 565 W (5.9–2.4 A) (0.5 W with Standby Mode set to ECO, 7 W with Standby Mode set to NORMAL) |
| On-mode power consumption (Operating mode) |
|
|
| Cabinet materials | Molded plastic | |
| Operation noise*1 | 36 dB (Normal) | 35 dB (Normal) |
| Dimensions (W x H x D) | PT-RZ790/RZ690: 498 x 200*7 x 581 mm (19 19/32˝ x 7 7/8˝*7 x 22 7/8˝) (with supplied lens) PT-RZ790L/RZ690L: 498 x 200*7 x 538 mm (19 19/32˝ x 7 7/8˝*7 x 21 3/16˝) (without lens) |
|
| Weight*8 | PT-RZ790/RZ690: Approx. 22.1 kg (48.7 lbs) (with supplied lens) PT-RZ790L/RZ690L: Approx. 21.3 kg (47.0 lbs) (without lens) |
|
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)*9, operating humidity: 10–80 % (no condensation) | |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™ | |
| Terminals
PT-RZ990/RZ990L PT-RZ890/RZ890L PT-RZ790/RZ790L PT-RZ690/RZ690L |
 |
|
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
*2 Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped.
*3 Average light-output value of all shipped products measured at the center of the screen in NORMAL Mode.
*4 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, Normal Mode, Dynamic Contrast [3], under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment.
*5 Lens shift is not supported on the ET-DLE055, and the optical axis is fixed with the ET-DLE035.
*6 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®.
*7 With legs at shortest position.
*8 Average value. May differ depending on the actual unit.
*9 The light output may be reduced to protect the projector depending on the temperature or altitude of operational environment.
