Using with iOS / iPadOS device
( iOS14.0,iPadOS 14.0 and later versions)

There are two following methods to share images from an iOS / iPadOS device to a display or projector.
It can be used according to the usage environment (wireless LAN, security measures, etc)

② Connecting to the external network

01

Connect the receiver to a display device with HDMI cable, and power on the receiver.

*Use AC adapotor or USB power out (5V2A) device

02

Standby menu is displayed on the screen

Standby menu

03

Wired LAN connection

Connect the LAN cable to the LAN terminal and connect to the external network

In the initial setup , connecting the LAN terminal of the receiver to the network allows the IP address of the receiver to be automatically assigned by the router using the DHCP function. The assigned IP address is displayed on the standby screen. To manage the receiver
(TY-WPR1/TY-WPR1W)/receiver board (TY-SB01WP), use this IP address for connection.

*If the DHCP server does not exist or if you want to specify the IP address, you can set it on the Web setting screen.

*The iOS / iPad OS device that mirrors the screen connects to an access point other than the PressIT receiver in this network.

04

Install the dedicated app [PressIT] on the iOS / iPadOS device from the App Store.

You can also scan the QR code below to install the app.
05

Start the PressIT app

Tap the icon to launch the app

pressit-flow-cursor

An image with the same design as the transmitter is displayed.
Click "Select a Receiver"

The list of receivers on the network is displayed.
Connect to the device you want to display.

Push “Screen Broadcast”

Push “Start Broadcast”

Transmitter image is displayed
Ready to transmit, the LED part will turn white.

Depending on the environment, delays and stuttering may occur.

05

Mirroring starts.

The image on left shows the connected state. In this case, images are being shared
When returning to the Home Screen or operating another app without
exiting the app, those images are also shared (mirroring).

Mirroring starts.

The image on left shows the connected state. In this case, images are being shared
When returning to the Home Screen or operating another app without
exiting the app, those images are also shared (mirroring).

Use the App Switcher

1. To see all your open apps, do one of the following:

- On a device with Face ID: Swipe up from the bottom of the screen, then pause in the center of the screen.

- On a device with a Home button: Double-click the Home button.

2. To browse the open apps, swipe, then tap the app you want to use , or tap the app you want to use on the Home Screen.


Tap "Stop Broadcast" to stop mirroring.
It doesn't work when I press the button.

Promotion movie

Play Movie

Product purchase information

Contact Information
Contact Infomation