LightPen3 for Mac
This is a software application that lets you operate interactive function.
Before installing the LightPen3, installation of the SP Driver is required.
| Compatible Projector Models |
PT-TW381R |
|---|---|
| Latest Version | Version 9.15.1219 (UPDATED: May 8, 2020) Update information from Version 1.0.10 • Supports 64-bit. • The new SP Driver for the PT-TW381R/TW371R/TW351R/TW343R/TW341R is supported. |
System Requirements
| OS | macOS: High Sierra/Mojave/Catalina |
|---|---|
| CPU | Intel® processor |
| RAM | 2 GB or more |
| Free hard disk capacity | 100 MB or more |
Note:
・Please notice that it is not guaranteed of the proper operations for system requirements other than the above mentioned requirements or for self-made computers.
Downloading and Installing the SP Driver
The SP Driver differs among the PT-TW381R/TW371R/TW351R and the PT-TW343R/TW341R.
Download the appropriate driver for the projector you are using.
For the PT-TW381R/TW371R/TW351R
SPDriver9_v9.19M.1119.dmg (387 KB)For the PT-TW343R/TW341R
The SP Driver to be used varies depending on the serial number on the projector body.
Confirm the method for checking the serial number prior to downloading.
For a serial number prior to "DH6340156"
SPDriver6_v6.19M.1120P.dmg (191 KB)For a serial number of "DH6340156" or after
SPDriver9_v9.19M.1119.dmg (387 KB)How to Download and Install
1. Click the "Download" button above.
2. Double click the “SP Driver" icon inside the disk image.
Downloading and Installing the Software
LightPen3_v9.15.1219.dmg (836 KB)How to Download and Install
1. Click the "Download" button above.
2. Double click the "LightPen3" icon inside the disk image.
For specific installation instructions, refer to the following manual.
Note:
The illustrations and screenshots in this page may be different from those on your computer.
In addition, the specification of this software is subject to change without notice.
