Installation1-Chip DLP™ Projectors
PT-FRZ60 / PT-FRZ50
PT-FRZ60 |
PT-FRZ50 |
|
---|---|---|
Projector type | 1-Chip DLP™ projector | |
DLP™ chip | ||
Panel size | 17.0 mm (0.67 in) diagonal (16:10 aspect ratio) | |
Display method | DLP™ chip x 1, DLP™ projection system | |
Number of pixels | 2,304,000 (1920 x 1200 pixels) | |
Light source | Laser diodes | |
Light output*1
?
ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m2). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. |
6,000 lm*2 / 6,000 lm (ANSI)*3 / 6,200 lm (Center)*4 | 5,200 lm*2 / 5,200 lm (ANSI)*3 / 5,400 lm (Center)*4 |
Time until light output declines to 50 %*5 | 20,000 hours (Normal) | |
Resolution | 1920 x 1200 pixels | |
Contrast ratio*2 | 20,000:1 (Full On/Full Off, Picture Mode: Dynamic, Dynamic Contrast 1, Operating Mode: Normal) | |
Screen size (diagonal) | 1.02–7.62 m (40–300 in), 16:10 aspect ratio | |
Center-to-corner zone ratio*2 | 90 % | |
Lens | 2.0x manual zoom (throw ratio: 1.46–2.94:1), manual focus, F 2.0–3.4, f 21.5–43.0 mm | |
Lens shift (From the origin point of the lens mounter) |
||
Vertical | +64 %, -44 % (manual) | |
Horizontal | +34 %, -27 % (manual) | |
Keystone correction range | Vertical: ±40 °, Horizontal: ±20 ° | |
Installation | Ceiling/floor, front/rear, free 360-degree installation | |
Terminals | ||
HDMI 1 IN/HDMI 2 IN | HDMI 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input*6), CEC supported | |
COMPUTER 1 IN | D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) | |
COMPUTER 2 IN/1 OUT | D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) | |
VIDEO IN | Pin jack x 1 (composite video) | |
AUDIO IN 1 | Pin jack x 1 (L, R) | |
AUDIO IN 2/3 | M3 x 1/M3 x 1 | |
AUDIO OUT | M3 x 1 (Variable) | |
SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.3 compatible, Deep Color compatible, 4K/60p signal input*6 | |
LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
USB | USB connector (Type A) x 1 (Output 5 V/2 A) | |
Power supply | AC 100–240 V, 50/60 Hz | |
Maximum power consumption | 540 W (5.8–2.3 A) (0.5 W with Standby Mode set to ECO, 10 W with Standby Mode set to NORMAL) | 465 W (5.0–2.0 A) (0.5 W with Standby Mode set to ECO, 10 W with Standby Mode set to NORMAL) |
On-mode power consumption (Operating mode) |
|
|
Cabinet materials | Molded plastic | |
Operation noise*2 | 30 dB (Quiet Mode), 35 dB (Normal Mode) | 27 dB (Quiet Mode), 32 dB (Normal Mode) |
Dimensions (W x H x D) | 498 x 168*7 x 492 mm (19 5/8˝ x 6 5/8˝*7 x 19 3/8˝ ) | |
Weight*8 | Approx. 16.1 kg (35.5 lbs) | Approx. 16.0 kg (35.3 lbs) |
Operating environment | Operating temperature: 0–45 °C (32–113 °F), operating humidity: 10–80 % (no condensation) | |
Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software | |
Terminals PT-FRZ60/FRZ50 |
*1 When [PICTURE MODE] is set to [DYNAMIC], [DAYLIGHT VIEW] is set to [OFF], [DYNAMIC CONTRAST] is set to [OFF], [LIGHT OUTPUT] is set to [100%], and [AUTO POWER SAVE] is set to [OFF].
*2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
*3 Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped.
*4 Average light-output value of all shipped products measured at the center of the screen.
*5 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, Normal Mode, Dynamic Contrast 2, temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of airborne particulate matter. Estimated time until light output declines to 50 % varies depending on environment.
*6 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®.
*7 With legs at shortest position.
*8 Average value. May differ depending on the actual unit.