Specifications

Large-Venue3-Chip DLP™ Projectors

PT-RQ13K

	PT-RQ13K
Power supply	100–240 V AC, 50/60 Hz
Power consumption^*1	1,270 W (0.3 W with Standby Mode set to Eco^*1, 4 W with Standby Mode set to Normal); Average power consumption: 913 W (Normal Mode), 782 W (Eco Mode), 531–732 W (Long Life 1 Mode), 477–702 W (Long Life 2 Mode),423–665 W (Long Life 3 Mode) [Operating temperature: 25 °C (77 °F), altitude: 700 m (2,297 ft), ICE627087: 2008 Broadcast content, Picture Mode: Dynamic, Dynamic Contrast Mode: 3]
DLP™ chip
Panel size	22.9 mm (0.9˝) diagonal (16:10 aspect ratio)
Display method	DLP™ chip x 3, DLP™ projection system
Pixels	4,096,000 (2560 x 1600) x 3, total of 12,288,000 pixels when Quad Pixel Drive set to OFF, 49152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON
Refresh rate	240 Hz^*2
Lens	Optional (no lens included with this model)
Light source	Laser diode (Class 1) (Class 3R for US models), Light-source life^*3: 20,000 hours (Normal Mode), 24,000 hours (Eco Mode)
Screen size (diagonal)	1.78–25.4 m (70–1,000˝), 1.78–15.24 m (70–600˝) with ET-D75LE8, 3.05–15.24 m (120–600˝) with ET-D75LE90, 16:10 aspect ratio
Brightness^*4	10,000 lm
Contrast^*4	20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Resolution	5120 x 3200 pixels (Quad Pixel Drive: ON)
Supported RGB signal	XGA–WUXGA
Supported video signal	NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i, 4K
Optical axis shift^*5 (from center of screen)
Vertical	±59 % (±44 % with the ET-D75LE6, +74 – +84 % with the ET-D75LE90) (powered)
Horizontal	±29 % (±19 % with the ET-D75LE6, -12 – +16 % with the ET-D75LE90) (powered)
Keystone correction range^*6	Vertical: ±40° (±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±15° (0° with ET-D75LE90)
Keystone correction range with optional Upgrade Kit ET-UK20^*6	Vertical: ±45° (±40° with ET-D75LE10/D75LE20, ±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±40° (±15° with ET-D75LE6/D75LE10/D75LE50, ±20° with ET-D75LE20, ±25° with ET-D75LE30, ±30° with ET-D75LE40, ±40° with ET-D75LE8, 0° with ET-D75LE90), Up to a total of ±30° during simultaneous horizontal and vertical correction.
Installation	Ceiling/floor, front /rear, free 360-degree installation
Cabinet materials	Molded plastic
Dimensions (W x H x D)	578 x 270 x 725 mm (22 3/4˝ x 10 5/8˝ x 28 17/32˝) (optional lens, legs and lens cover not included); 578 x 323.5 x 740 mm (22 3/4˝ x 12 23/32˝ x 29 1/8˝) (Including legs at shortest position and protruding parts)
Weight^*7	Approx. 49.0 kg (108 lbs) (optional lens not included)
Operation noise^*4	46 dB
Operating environment	Operating temperature: 0–45 °C (32–113 °F)^*8, operating humidity: 10–80 % (no condensation)
Applicable software	Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10 Auto Screen Adjustment Kit)

Terminals PT-RQ13K

*1 When Standby Mode is set to Eco, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal.

*2 Refresh rate varies depending on scanning frequency.

*3 At this time the brightness will have decreased to approximately half of its original level. Light source lifetime may be reduced depending on environmental conditions.

*4 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.

*5 Optical axis shift function cannot be operated when used with the ET-D75LE50.

*6 Range varies depending on mounted lens.

*7 Average value. May differ depending on the actual unit.

*8 When the operating mode is set to Normal, the operating temperature range is 0 °C (32 °F) to 45 °C (113 °F), and the operating temperature range is 0 °C (32 °F) to 40 °C (104 °F) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,780 ft) above sea level. When the operating mode is set to Eco or Long Life 1/2/3, the operating temperature range is 0 °C (32 °F) to 40 °C (104 °F). When used with Smoke Cut Filter, the operating temperature range is 0 °C (32 °F) to 35 °C (95 °F). Furthermore, the projector cannot be used in locations over 2,700 m (8,858 ft) with the operating mode set to Eco or Long Life 1/2/3. When used with Smoke Cut Filter, the projector cannot be used in locations over 1,400 m (4,593 ft). The brightness of the light source may drop depending on operating environment and the operating temperature range in order to protect the projector.