Large-Venue3-Chip DLP™ Projectors
PT-RQ25K SeriesPT-RQ25K / PT-RZ24K / PT-RQ18K / PT-RZ17K
PT-RQ25K |
PT-RZ24K |
|
---|---|---|
Projector type | 3-Chip DLP™ projector | |
DLP™ chip | ||
Panel size | 20.3 mm (0.8 in) diagonal (16:10 aspect ratio) | |
Display method | DLP™ chip x 3, DLP™ projection system | |
Number of pixels | 2,304,000 (1920 x 1200 pixels) x 3 | |
Light source | Laser diode | |
Light output1, 2
?
ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m2). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. |
20,000 lm3 / 20,000 lm (ANSI)4 / 21,000 lm (Center)5 | |
Time until light output declines to 50 %6 | 20,000 hours (NORMAL/QUIET), 24,000 hours (ECO) | |
Resolution | 4K (3840 x 2400 pixels) (Quad Pixel Drive: ON) |
WUXGA (1920 x 1200 pixels) |
Contrast ratio3 | 25,000:1 (Full On/Full Off, Dynamic Contrast [3]) | |
Screen size (diagonal) | 1.78–25.40 m (70–1000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95, 5.08–15.24 m (200–600 in) with ET-D3LEU100/D3LEU101/D3LEW200/D3LEW201 |
|
Center-to-corner zone ratio3 | 90 % | |
Lens | Optional (no lens included with this model) | |
Lens shift (From the origin point of the lens mounter) |
||
Vertical | ±66 % (52 % with ET-D75LE6/ET-D3LEW60, +71 % / +93 % with ET-D75LE95, ±66 % with ET-D3LEU100/D3LEU101, ±57 % with ET-D3LEW200/D3LEW201) (powered) |
|
Horizontal | ±24 % (18 % with ET-D75LE6/ET-D3LEW60, ±14 % with ET-D75LE95, -25 % / +30 % with ET-D3LEU100/D3LEU101, ±18 % with ET-D3LEW200/D3LEW201) (powered) |
|
Keystone correction range | Vertical: ±45 ° (± 40 ° with ET-D75LE10/ET-D3LEW10/ET-D75LE20/ET-D3LES20, ±28 ° with ET-D75LE6/ET-D3LEW60, ±22 ° with ET-D3LEW50, ±15 ° with ET-D3LEW200/D3LEW201, ±8 ° with ET-D3LEU100/D3LEU101, +5 ° with ET-D75LE95), Horizontal: ±40 ° (±15 ° with ET-D3LEW50/ET-D75LE6/ET-D3LEW60, ±5 ° with ET-D3LEU100/D3LEU101/ET-D3LEW200/D3LEW201, 0 ° with ET-D75LE95) When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. |
|
Installation | Ceiling/floor, front/rear, free 360-degree installation | |
Terminals | ||
HDMI IN | HDMI x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input7) | |
DisplayPort™ | DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input7) | |
MULTI PROJECTOR SYNC IN |
BNC x 1 | — |
MULTI PROJECTOR SYNC OUT |
BNC x 1 | — |
MULTI PROJECTOR SYNC IN/ 3D SYNC 1 IN/OUT (dual purpose) |
— | BNC x 1 |
MULTI PROJECTOR SYNC OUT/ 3D SYNC 2 OUT (dual purpose) |
— | BNC x 1 |
SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control | |
REMOTE 1 OUT | M3 stereo mini-jack x 1 for link control (for wired remote control) | |
REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |
LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
USB | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory | |
DC OUT | USB Type A x 1 (for power supply, DC 5 V, 2 A) | |
Expansion slot | Open slot for for function boards, Intel® SDM compatible | |
Power supply | AC 100 V–120 V / AC 200 V–240 V, 50 Hz/60 Hz (The maximum value of light output is limited to 15,000 lm or less when using the projector with AC 100 V to AC 120 V. Other limitations apply8.) |
|
Maximum power consumption9 | AC 200 V–AC 240 V : 1,490 W (1,520 VA) AC 100 V–AC 120 V : 1,080 W (1,090 VA) |
AC 200 V–AC 240 V : 1,470 W (1,520 VA) AC 100 V–AC 120 V : 1,060 W (1,090 VA) |
On-mode power consumption (Operating mode)9 |
|
|
Cabinet materials | Molded plastic | |
Operation noise3 | 46 dB (NORMAL/QUIET), 43 dB (ECO) | |
Dimensions (W x H x D) |
Approx. 550 x 220 x 570 mm (21 5/8˝ x 8 11/16˝ x 22 7/16˝ ) (not including protruding parts) | |
Weight10 | Approx. 35 kg (77.2 lbs) | |
Operating environment | Operating temperature: 0–45 °C (32–113 °F11), operating humidity: 10–80 % (no condensation) | |
Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Projector Network Setup Software, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™ |
|
Terminals PT-RQ25K |
PT-RQ18K |
PT-RZ17K |
|
---|---|---|
Projector type | 3-Chip DLP™ projector | |
DLP™ chip | ||
Panel size | 20.3 mm (0.8 in) diagonal (16:10 aspect ratio) | |
Display method | DLP™ chip x 3, DLP™ projection system | |
Number of pixels | 2,304,000 (1920 x 1200 pixels) x 3 | |
Light source | Laser diode | |
Light output1, 2
?
ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m2). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m2). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. |
16,000 lm3 / 16,000 lm (ANSI)4 / 16,800 lm (Center)5 | |
Time until light output declines to 50 %6 | 20,000 hours (NORMAL/QUIET), 24,000 hours (ECO) | |
Resolution | 4K (3840 x 2400 pixels) (Quad Pixel Drive: ON) |
WUXGA (1920 x 1200 pixels) |
Contrast ratio3 | 25,000:1 (Full On/Full Off, Dynamic Contrast [3]) | |
Screen size (diagonal) | 1.78–25.40 m (70–1000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95, 5.08–15.24 m (200–600 in) with ET-D3LEU100/D3LEU101/D3LEW200/D3LEW201 |
|
Center-to-corner zone ratio3 | 90 % | |
Lens | Optional (no lens included with this model) | |
Lens shift (From the origin point of the lens mounter) |
||
Vertical | ±66 % (52 % with ET-D75LE6/ET-D3LEW60, +71 % / +93 % with ET-D75LE95, ±66 % with ET-D3LEU100/D3LEU101, ±57 % with ET-D3LEW200/D3LEW201) (powered) |
|
Horizontal | ±24 % (18 % with ET-D75LE6/ET-D3LEW60, ±14 % with ET-D75LE95, -25 % / +30 % with ET-D3LEU100/D3LEU101, ±18 % with ET-D3LEW200/D3LEW201) (powered) |
|
Keystone correction range | Vertical: ±45 ° (± 40 ° with ET-D75LE10/ET-D3LEW10/ET-D75LE20/ET-D3LES20, ±28 ° with ET-D75LE6/ET-D3LEW60, ±22 ° with ET-D3LEW50, ±15 ° with ET-D3LEW200/D3LEW201, ±8 ° with ET-D3LEU100/D3LEU101, +5 ° with ET-D75LE95), Horizontal: ±40 ° (±15 ° with ET-D3LEW50/ET-D75LE6/ET-D3LEW60, ±5 ° with ET-D3LEU100/D3LEU101/ET-D3LEW200/D3LEW201, 0 ° with ET-D75LE95) When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. |
|
Installation | Ceiling/floor, front/rear, free 360-degree installation | |
Terminals | ||
HDMI IN | HDMI x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input7) | |
DisplayPort™ | DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input7) | |
MULTI PROJECTOR SYNC IN |
BNC x 1 | — |
MULTI PROJECTOR SYNC OUT |
BNC x 1 | — |
MULTI PROJECTOR SYNC IN/ 3D SYNC 1 IN/OUT (dual purpose) |
— | BNC x 1 |
MULTI PROJECTOR SYNC OUT/ 3D SYNC 2 OUT (dual purpose) |
— | BNC x 1 |
SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control | |
REMOTE 1 OUT | M3 stereo mini-jack x 1 for link control (for wired remote control) | |
REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |
LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
USB | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory | |
DC OUT | USB Type A x 1 (for power supply, DC 5 V, 2 A) | |
Expansion slot | Open slot for for function boards, Intel® SDM compatible | |
Power supply | AC 100 V–120 V / AC 200 V–240 V, 50 Hz/60 Hz (The maximum value of light output is limited to 15,000 lm or less when using the projector with AC 100 V to AC 120 V. Other limitations apply8.) |
|
Maximum power consumption9 | AC 200 V–AC 240 V : 1,190 W (1,220 VA) AC 100 V–AC 120 V : 1,080 W (1,090 VA) |
AC 200 V–AC 240 V : 1,170 W (1,220 VA) AC 100 V–AC 120 V : 1,060 W (1,090 VA) |
On-mode power consumption (Operating mode)9 |
|
|
Cabinet materials | Molded plastic | |
Operation noise3 | 43 dB (NORMAL/ECO), 40 dB (QUIET) | |
Dimensions (W x H x D) |
Approx. 550 x 220 x 570 mm (21 5/8˝ x 8 11/16˝ x 22 7/16˝ ) (not including protruding parts) | |
Weight10 | Approx. 35 kg (77.2 lbs) | |
Operating environment | Operating temperature: 0–45 °C (32–113 °F11), operating humidity: 10–80 % (no condensation) | |
Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Projector Network Setup Software, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™ |
1 This is the value when the Zoom Lens (Model No.: ET‑D3LES20) is used with power supply voltage of AC 200 V to AC 240 V. The value varies depending on the lens.
2 When [OPERATING MODE] is set to [NORMAL].
3 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
4 Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped.
5 Average light-output value of all shipped products measured at the center of the screen.
6 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [3], under conditions with 35 °C (95 °F),
700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output decreases to 50 % will vary depending on environment.
7 4K signals are converted to WUXGA (1920 x 1200 pixels) only for the PT-RZ24K and PT-RZ17K.
8 Maximum value of light output is further decreased in the following cases: when a function board is installed in the slot, when the light source is deteriorating from use, or when there is dust on the optical parts.
9 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft).
10 Average value. May differ depending on the actual unit.
11 When optional AJ-WM50 Series wireless module is attached, operating temperature range becomes 0–40 °C (32–104 °F). The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft).