Large-Venue3-Chip DLP™ Projector

PT-RZ14K

 
PT-RZ14K
Projector type 3-Chip DLP™ projector
DLP™ chip  
Panel size 20.3 mm (0.8 in) diagonal (16:10 aspect ratio)
Display method DLP™ chip x 3, DLP™ projection system
Number of pixels 2,304,000 (1920 x 1200 pixels) x 3
Light source Laser diode
Light output1, 2 14,000 lm / 14,700 lm (Center)3
Time until
light output
declines to 50 %4
20,000 hours (NORMAL), 24,000 hours (ECO)
Resolution WUXGA (1920 x 1200 pixels)
Contrast ratio2 25,000:1 (Full On/Full Off, Dynamic Contrast [3])
Screen size (diagonal) 1.78–25.40 m (70–1000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ET-D3LET80,
3.05–15.24 m (120–600 in) with ET-D75LE95, 5.08–15.24 m (200–600 in) with ET-D3LEU100/D3LEW200
Center-to-corner
zone ratio2
90 %
Lens Optional (no lens included with this model)
Lens shift
(From the origin
point of the
lens mounter)
 
Vertical ±66 % (±52 % with ET-D75LE6/ET-D3LEW60/ET-D3LEW300, +71 % / +93 % with ET-D75LE95,
±66 % with ET-D3LEU100, ±57 % with ET-D3LEW200) (powered)
Horizontal ±24 % (±18 % with ET-D75LE6/ET-D3LEW60/ET-D3LEW300, ±14 % with ET-D75LE95,
-25 % / +30 % with ET-D3LEU100, ±18 % with ET-D3LEW200) (powered)
Keystone correction range Vertical: ±45 ° (± 40 ° with ET-D75LE10/ET-D3LEW10/ET-D75LE20/ET-D3LES20,
±28 ° with ET-D75LE6/ET-D3LEW60/ET-D3LEW300, ±22 ° with ET-D3LEW50, ±15 ° with ET-D3LEW200,
±8 ° with ET-D3LEU100, +5 ° with ET-D75LE95),
Horizontal: ±40 ° (±15 ° with ET-D3LEW50/ET-D75LE6/ET-D3LEW60/ET-D3LEW300,
±5 ° with ET-D3LEU100/ET-D3LEW200, 0 ° with ET-D75LE95)
When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously,
correction cannot be made exceeding a total of 55 °.
Installation Ceiling/floor, front/rear, free 360-degree installation
Terminals  
HDMI™ 1/2 IN HDMI™ x 2 (Deep Color, compatible with HDCP 2.3)
DisplayPort™ DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3)
MULTI SYNC IN/
3D SYNC 1 IN/OUT
(dual purpose)
BNC x 1 (TTL high impedance. When [3D SYNC MODE] is set to output, TTL output: Maximum 10 mA)
MULTI SYNC OUT/
3D SYNC 2 OUT
(dual purpose)
BNC x 1 (TTL output: Maximum 10 mA)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
REMOTE 1 IN M3 stereo mini-jack x 1 for wired remote control
REMOTE 1 OUT M3 stereo mini-jack x 1 for link control (for wired remote control)
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
LAN RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
USB USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory
DC OUT USB Type A x 1 (for power supply, DC 5 V, 2 A)
Expansion slot Open slot for for function boards, Intel® SDM compatible
Power supply AC 100–120 V / AC 200–240 V
Maximum power consumption5 AC 200–240 V: 1,050 W (1,060 VA),
AC 100–120 V: 1,080 W (1,090 VA)
On-mode power consumption
(Operating mode)5
[NORMAL]
950 W

[ECO]
780 W
Operation noise2 40 dB (NORMAL/ECO)
Dimensions
(W x H x D)
Approx. 550 x 220 x 570 mm (21 5/8˝ x 8 11/16˝ x 22 7/16˝) (not including protruding parts)
Weight6 Approx. 35 kg (77.2 lbs)
Operating environment Operating temperature: 0–45 °C (32–113 °F7), operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Projector Network Setup Software,
Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™

1 This is the value when the Zoom Lens (Model No.: ET-D3LES20) is used. The value varies depending on the lens.

2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards.

3 Average light output value of all shipped products measured at the center of the screen in NORMAL Mode.

4 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, Dynamic Contrast [3], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output decreases to 50 % will vary depending on environment.

5 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft).

6 Average value. May differ depending on the actual unit.

7 When optional AJ-WM50 Series wireless module is attached, operating temperature range becomes 0–40 °C (32–104 °F). The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft).