Using with Android device (Android 5.0 and later versions)

There are two following methods to share images from an Android device to a display or projector.
It can be used according to the usage environment (wireless LAN, security measures, etc)

② Connecting to the external network

Connect the receiver to a display device with HDMI cable, and power on the receiver.

*Use AC adapotor or USB power out (5V2A) device

Standby menu is displayed on the screen

Standby menu

Display web setting page

Note that while operating the web settings using this method, the mobile device cannot be connected to Internet temporarily.

Turn on wireless LAN of the PC or mobile device and select SSID displayed on the standby menu.

Above example: PressIT-A132F34D

Enter the wireless LAN password.

Above example: 75847328

Once connected, enter the IP address displayed on the lower right of the standby menu into the address bar of the web browser, and press Enter.

*The IP address on the image is an example and may be different depending on the environment.

When connection is correctly completed, the web setting page is displayed.

Log in as an administrator and select "Network Management"

Click “Connect to 5GHz Wireless”.

*A 5GHz band network environment is required.

* When a network cable is connected to the receiver, DHCP of the wired LAN is prioritized.

Select SSID to connect and enter the password.

This is a state where connection to Internet is established via external wireless access point.

When the receiver is connected to the external wireless access point, the wireless LAN icon is displayed on the lower right of the standby menu

In order to store the external wireless access point in the receiver, set [Remember Wireless Access Point] to [ON] and click[OK]. The system will restarts.

To open the Web setting page from the PC or mobile device, be sure that it is connected to the same wireless access point as the receiver, enter the IP address displayed on the lower right into the address bar of the web browser, and press Enter.

When connection is completed, the Web setting page is displayed.

Install the dedicated app [PressIT] on the Android device.

1.When installing from the WEB setting screen

Download an app from web setting page if you can not connect to the Goolge Play Store. Once you downloaded from the web page, it is required to activate the app in order to install on to the Android device. Please check the version of the Android device/Android OS

2.When installing from the Google Play store

You can also scan the QR code below to install the app.

Start the PressIT app

Tap the icon to launch the app

Click "Search Device" when an image of the transimitter is displayed on the Android device

Select appropriate device that your see on the list of receivers (SSIDs that have been set) on the connected network.

A message pops up and select "Start Now"

The same operation as the transmitter is possible.

A:Performs the same operation as main button of the transmitter.
B:Performs the same operation as sub button of the transmitter.
C:Displays Android app information.

Tap the main button of the transmitter on the screen.

Mirroring starts.

The image on left shows the connected state. In this case, images are being shared
When returning to the home screen or operating another app without
exiting the app, those images are also shared (mirroring).

Note

Copyright-protected content cannot be displayed.
Motion pictures may not be displayed smoothly depending on the processing capability of the Android device or network conditions.
When making connections on the network to which multiple receivers are connected, there are multiple display devices. Make sure to connect to the correct display device

Promotion movie

Play Movie

Product purchase information

Contact Information